blocks|key|6046983|text|安装皮斯|type|unordered-list-item|depth|inlineStyleRanges|entityRanges|offset|length|data|6046984|📷|atomic|6046985|安装后，将在System+>+Administration+>+Storage下找到|6046986|6046987|从分区列表中选择分区，然后单击“挂载”，然后应用。|6046988|另外，要获得更多信息，您可以查看此帖子。|entityMap|0|LINK|mutability|MUTABLE|url|http://packages.ubuntu.com/pysdm|1|IMAGE|IMMUTABLE|imageUrl|https://hostmar.co/software-large|imageAlt|2|https://i.stack.imgur.com/H6opN.png|3|http://ubuntuforums.org/showthread.php?t=217009^0|2|2|0|0|0|1|1|0|0|0|1|2|0|0|H|2|3^^$0|@$1|2|3|4|5|6|7|14|8|@]|9|@$A|15|B|16|1|17]]|C|$]]|$1|D|3|E|5|F|7|18|8|@]|9|@$A|19|B|1A|1|1B]]|C|$]]|$1|G|3|H|5|6|7|1C|8|@]|9|@]|C|$]]|$1|I|3|E|5|F|7|1D|8|@]|9|@$A|1E|B|1F|1|1G]]|C|$]]|$1|J|3|K|5|6|7|1H|8|@]|9|@]|C|$]]|$1|L|3|M|5|6|7|1I|8|@]|9|@$A|1J|B|1K|1|1L]]|C|$]]]|N|$O|$5|P|Q|R|C|$S|T]]|U|$5|V|Q|W|C|$X|Y|Z|-4]]|10|$5|V|Q|W|C|$X|11|Z|-4]]|12|$5|P|Q|R|C|$S|13]]]]

<ul>
<li>Install <a href="http://packages.ubuntu.com/pysdm" rel="nofollow noreferrer">pysdm</a> <a href="http://apt.ubuntu.com/p/pysdm" rel="nofollow noreferrer"><img src="https://hostmar.co/software-large" alt="Install pysdm"></a></li>
<li>After installation it will be found under System > Administration > Storage Device Manager</li>
</ul>

<img src="https://i.stack.imgur.com/H6opN.png" alt="alt text">

<ul>
<li>Select your partition from the partition list and click Mount and then Apply.</li>
<li>Also for more information you can check this <a href="http://ubuntuforums.org/showthread.php?t=217009" rel="nofollow noreferrer">post</a>. </li>
</ul>

blocks|key|6047136|text|/etc/fstab是一个配置文件，它包含计算机中所有分区和存储设备的信息。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|6047137|在那里记一个条目如下：|6047138|/dev/hdb1+++/home+++ext2++++defaults++++0+0|code-block|syntax|javascript|6047139|等等..。只需更改分区名称、挂载点、Fstype。|6047140|您的分区将在下一次引导时挂载。|entityMap^0|0|A|0|0|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|V|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|W|8|@]|D|@]|E|$]]|$1|O|3|P|5|6|7|X|8|@]|D|@]|E|$]]]|Q|$]]

<code>/etc/fstab</code> is a configuration file that contains information of all the partitions and storage devices in your computer. 

Make an entry there as below: 

<pre><code>/dev/hdb1 /home ext2 defaults 0 0
</code></pre>

etc ... just change partition names , mount points , Fstype. 

Your partition will be mounted on next boot.

blocks|key|4859137|text|📷|type|atomic|depth|inlineStyleRanges|entityRanges|offset|length|data|4859138|搜索“磁盘”从破折号回家。单击名为Disks的应用程序后，您应该会得到一个类似于此的窗口。|unstyled|4859139|单击您想要的分区，然后单击它下面看到的齿轮图标。单击编辑挂载选项。你将得到一扇窗户。只需将其滑动到ON即可启用自动挂载选项。对您想要的所有分区执行此操作。你就完蛋了！下一次重新启动后，所有选定的分区都将自动挂载。|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://i.stack.imgur.com/5gwx7.png|imageAlt^0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@$A|R|B|S|1|T]]|C|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|C|$]]|$1|G|3|H|5|F|7|V|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O|P|-4]]]]

<img src="https://i.stack.imgur.com/5gwx7.png" alt="enter image description here">

Search for "disks" from dash home. After you click the application called Disks, you should get a window something similar to this.

Click the Partition you would want and click the gear icon you see below it. Click Edit mount options. You will be presented with a window. Enable the automatic mount options by just sliding it to ON. Do this for all the partitions you want. And you are done! After next reboot, all the selected partitions will be mounted automatically.

blocks|key|6047053|text|下载一个名为pysdm的实用程序。安装时，它应显示为“系统”>“管理”下的存储设备管理器。然后，可以将驱动器设置为从那里自动挂载。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|6047054|它实际上是在您的系统上修改一个名为fstab的文件，它告诉您的系统需要什么样的文件系统，但是使用该实用程序来编辑它要比手动编辑要容易得多。|entityMap^0|6|5|0|H|5^^$0|@$1|2|3|4|5|6|7|I|8|@$9|J|A|K|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]]|H|$]]

Download a utility called <code>pysdm</code>. When installed it should show up as Storage Device Manager under System > Administration. You can then set the drive to automatically mount from there.

What it actually does is alter a file on your system called <code>fstab</code>, which tells your system what filesystems to expect, but it's much easier to use the utility to edit it rather than doing it manually.

blocks|key|6047269|text|自动安装也可以使用命令行工具udisks完成。这是侏儒坐骑的现代替代品。不是侏儒特有的。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|6047270|当您通常使用文件浏览器(nautilus等)挂载磁盘时，它会通过与后台的udisk交互来安装磁盘。|6047271|您可以在命令行上使用udisk工具做同样的事情。|6047272|/usr/bin/udisks+--mount+/dev/sdb1|code-block|syntax|javascript|6047273|--mount后面的位是要挂载的分区的设备名。(/dev/dev)|6047274|查找分区|header-two|6047275|的设备名称|6047276|在一个终端中，用nautilus打开分区(这确保它已经挂载)，输入挂载。您应该会看到有磁盘名的一行，如下所示：|6047277|/dev/sdb1+on+/media/My-Happy-Disk+type+vfat+....|entityMap^0|E|6|0|0|0|0|0|7|0|0|0|0^^$0|@$1|2|3|4|5|6|7|10|8|@$9|11|A|12|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|13|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|14|8|@]|D|@]|E|$]]|$1|J|3|K|5|L|7|15|8|@]|D|@]|E|$M|N]]|$1|O|3|P|5|6|7|16|8|@$9|17|A|18|B|C]]|D|@]|E|$]]|$1|Q|3|R|5|S|7|19|8|@]|D|@]|E|$]]|$1|T|3|U|5|6|7|1A|8|@]|D|@]|E|$]]|$1|V|3|W|5|6|7|1B|8|@]|D|@]|E|$]]|$1|X|3|Y|5|L|7|1C|8|@]|D|@]|E|$M|N]]]|Z|$]]

Automatic mounting could also done using <code>udisks</code> a command line tool. This is the modern replacement for gnome-mount. It's not gnome specific.

When you mount a disc normally with the file browser (nautilus etc) it mounts disks by interacting with udisks behind the scenes.

You can do the same thing on the command line with the udisks tool. 

<pre><code>/usr/bin/udisks --mount /dev/sdb1
</code></pre>

The bit after <code>--mount</code> is the device name of the partition you want to mount. (/dev/something)

Finding the device name of your Partition

Open your partition in nautilus (this makes sure it's mounted)
type mount in a terminal. You should see a line with your disk name on it like:

<pre><code>/dev/sdb1 on /media/My-Happy-Disk type vfat ....
</code></pre>

blocks|key|6047460|text|我问了一个重复的问题，并在寻找其他东西时找到了答案。在Kubuntu16.04中，您不需要命令行指令或安装软件。只需转到Settngs+>可移动设备>附加设备，并选择Automount。开发商做得很好！|type|unstyled|depth|inlineStyleRanges|entityRanges|data|entityMap^0^^$0|@$1|2|3|4|5|6|7|C|8|@]|9|@]|A|$]]]|B|$]]

I asked a duplicate of this question, and have found an answer when looking for something else. In Kubuntu 16.04, you don't need a command line instruction or to install software. Simply go to System Settngs > Removable Devices > Attached Devices and select Automount on Login. Good work by the developers!

How can I auto-mount all my hard disk partitions?

How can I automount my hard disk partitions?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

问如何使硬盘分区自动化？
EN

回答 6

Ask Ubuntu用户

Ask Ubuntu用户

Ask Ubuntu用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使硬盘分区自动化？EN

回答 6

Ask Ubuntu用户

Ask Ubuntu用户

Ask Ubuntu用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使硬盘分区自动化？
EN