Cisco Aironet 1142 - CPU 100%利用率
Cisco Aironet 1142 - CPU 100%利用率
提问于 2016-05-07 00:24:41
我有一个Cisco Aironet 1142 (AIR-LAP1142N-A-K9)，运行自主固件(c1140-k9w7-mx.153-3.JBB1)，由于看门狗超时，它今天开始频繁地重新启动它。我检查了sh proc cpu history，它显示自上次重新启动CPU以来，CPU的使用率为100%，这可以解释看门狗超时的原因。但是，如果我检查sh proc cpu，没有一个进程使用任何CPU 5秒或5分钟计数器，这让我感到困惑。随着以太网电缆的拔出和与接入点相关联的单个客户端，CPU将保持在100%的状态。我如何确定这个问题的根本原因，以及究竟是什么导致了如此高的CPU利用率？
sh
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version
15.3(3)JBB1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Thu 23-Jul-15 10:50 by prod_rel_team
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(18a)JA, RELEASE SOFTWARE (fc4)
ap1 uptime is 42 minutes
System returned to ROM by watchdog timer expired
System image file is "flash:/c1140-k9w7-mx.153-3.JBB1/c1140-k9w7-xx.153-3.JBB1"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-AP1142N-A-K9 (PowerPC405ex) processor (revision B0) with 98294K/32768K bytes of memory.
Processor board ID FTX1318S0HK
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from watchdog timer expired
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:90:91:57:C6
Part Number : 73-11451-05
PCA Assembly Number : 800-30554-02
PCA Revision Number : B0
PCB Serial Number : FOC13160ZW1
Top Assembly Part Number : 800-31273-01
Top Assembly Serial Number : FTX1318S0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1142N-A-K9
Configuration register is 0xFsh proc cpu历史记录
ap1 02:27:11 AM Monday Mar 1 1993 UTC
111111111111111111111111111111111111111111111111111111111111
000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000
100 ************************************************************
90 ************************************************************
80 ************************************************************
70 ************************************************************
60 ************************************************************
50 ************************************************************
40 ************************************************************
30 ************************************************************
20 ************************************************************
10 ************************************************************
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per second (last 60 seconds)
1111111111111111111111111111111111111111
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
100 ########################################
90 ########################################
80 ########################################
70 ########################################
60 ########################################
50 ########################################
40 ########################################
30 ########################################
20 ########################################
10 ########################################
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per minute (last 60 minutes)
* = maximum CPU% # = average CPU%
100
90
80
70
60
50
40
30
20
10
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%sh proc cpu排序为5秒
CPU utilization for five seconds: 100%/0%; one minute: 100%; five minutes: 100%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
1 3 28 107 0.00% 0.00% 0.00% 0 Chunk Manager
2 0 490 0 0.00% 0.00% 0.00% 0 Load Meter
3 1994 1716 1162 0.00% 0.00% 0.00% 0 Exec
4 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers
5 1650 330 5000 0.00% 0.00% 0.00% 0 Check heaps
6 0 1 0 0.00% 0.00% 0.00% 0 Pool Manager
7 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro
8 1 2 500 0.00% 0.00% 0.00% 0 Timers
9 0 58 0 0.00% 0.00% 0.00% 0 WATCH_AFS
10 0 1 0 0.00% 0.00% 0.00% 0 AAA_SERVER_DEADT
11 0 1 0 0.00% 0.00% 0.00% 0
...sh运行
Current configuration : 5750 bytes
!
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service sequence-numbers
!
hostname ap1
!
!
logging rate-limit console 9
enable secret 5 CENSORED
!
no aaa new-model
no ip source-route
no ip cef
ip domain name CENSORED
ip name-server 10.1.5.1
ip name-server 10.1.5.2
!
!
!
!
dot11 syslog
dot11 vlan-name Guest_Wi-Fi vlan 3
dot11 vlan-name Intranet vlan 1
dot11 vlan-name Wi-Fi vlan 2
!
dot11 ssid CENSORED
vlan 3
authentication open
authentication key-management wpa version 2
wpa-psk ascii 7 CENSORED
information-element ssidl
!
dot11 ssid CENSORED
vlan 2
authentication open
authentication key-management wpa version 2
wpa-psk ascii 7 CENSORED
information-element ssidl
!
!
dot11 network-map
!
no ipv6 cef
!
crypto pki trustpoint TP-self-signed-2425444294
enrollment selfsigned
subject-name cn=CENSORED
revocation-check none
rsakeypair TP-self-signed-2425444294
!
!
crypto pki certificate chain TP-self-signed-2425444294
certificate self-signed 01
CENSORED
quit
username admin privilege 15 secret 5 CENSORED
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
!
encryption vlan 2 mode ciphers aes-ccm
!
encryption vlan 3 mode ciphers aes-ccm
!
ssid CENSORED
!
ssid CENSORED
!
antenna gain 0
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.2
description Wi-Fi
encapsulation dot1Q 2
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
!
interface Dot11Radio0.3
description Guest_Wi-Fi
encapsulation dot1Q 3
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 spanning-disabled
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
!
interface Dot11Radio1
no ip address
!
encryption vlan 2 mode ciphers aes-ccm
!
encryption vlan 3 mode ciphers aes-ccm
!
ssid CENSORED
!
ssid CENSORED
!
antenna gain 0
peakdetect
no dfs band block
speed basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel width 40-above
channel 5180
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1.2
encapsulation dot1Q 2
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
!
interface Dot11Radio1.3
encapsulation dot1Q 3
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 spanning-disabled
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
!
interface Dot11Radio1.13
!
interface GigabitEthernet0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0.1
description Intranet
encapsulation dot1Q 1 native
bridge-group 1
no bridge-group 1 source-learning
!
interface GigabitEthernet0.2
description Wi-Fi
encapsulation dot1Q 2
bridge-group 2
no bridge-group 2 source-learning
!
interface GigabitEthernet0.3
description Guest_Wi-Fi
encapsulation dot1Q 3
bridge-group 3
no bridge-group 3 source-learning
!
interface BVI1
mac-address 0022.9091.57c6
ip address 10.1.0.3 255.255.0.0
!
ip default-gateway 10.1.0.1
ip forward-protocol nd
ip http server
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
snmp-server community public RO
snmp-server chassis-id CENSORED
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
!
end sh日志-升级到JC固件
之后
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 15.3(3)JC, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 11-Dec-15 12:56 by prod_rel_team
000014: *Mar 1 01:51:00.078: %SNMP-5-COLDSTART: SNMP agent on host ap1 is undergoing a cold start
000015: *Mar 1 01:51:00.112: %SSH-5-ENABLED: SSH 1.99 has been enabled
000016: *Mar 1 01:51:00.115: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
000017: *Mar 1 01:51:00.115: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
000018: *Mar 1 01:51:00.122: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
000019: *Mar 1 01:51:00.748: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
000020: *Mar 1 01:51:01.115: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
000021: *Mar 1 01:51:01.115: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
000022: *Mar 1 01:51:01.136: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 8 seconds
000023: *Mar 1 01:51:02.168: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
000024: *Mar 1 01:51:03.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
000025: *Mar 1 01:51:10.372: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2442 selected
000026: *Mar 1 01:51:10.372: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
000027: *Mar 1 01:51:11.372: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
000028: *Mar 1 01:51:24.198: %DOT11-6-ASSOC: Interface Dot11Radio1, Station 60f8.1db9.a5ce Associated KEY_MGMT[WPAv2 PSK]
000029: *Mar 1 01:51:37.173:
Cmd 0x16 Timeout d1 After 12s
000030: *Mar 1 01:51:42.255: %EVT-4-WRN: Write of flash:/event.r1 done
000031: *Mar 1 01:51:43.059: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
000032: *Mar 1 01:51:44.472: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
000033: *Mar 1 01:51:45.310: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
000034: *Mar 1 01:51:45.902: %DOT11-4-MAXRETRIES: Packet to client 60f8.1db9.a5ce reached max retries, removing the client
000035: *Mar 1 01:51:46.311: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
000036: *Mar 1 01:51:49.651: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 60f8.1db9.a5ce Reason: Sending station has left the BSS
000037: *Mar 1 01:51:49.667: %DOT11-6-ASSOC: Interface Dot11Radio1, Station 60f8.1db9.a5ce Reassociated KEY_MGMT[WPAv2 PSK]
000038: *Mar 1 01:52:03.626: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 60f8.1db9.a5ce Reason: Sending station has left the BSS
000039: *Mar 1 01:52:06.311:
Cmd 0x16 Timeout d1 After 12s
000040: *Mar 1 01:52:06.352: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
000041: *Mar 1 01:52:07.766: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
000042: *Mar 1 01:52:08.605: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
000043: *Mar 1 01:52:09.605: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
000044: *Mar 1 01:52:14.435: %DOT11-6-ASSOC: Interface Dot11Radio1, Station 60f8.1db9.a5ce Reassociated KEY_MGMT[WPAv2 PSK]
000045: *Mar 1 01:52:25.531: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 60f8.1db9.a5ce Reason: Sending station has left the BSS
000046: *Mar 1 01:52:28.608:
Cmd 0x16 Timeout d1 After 12s
000047: *Mar 1 01:52:28.652: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
000048: *Mar 1 01:52:30.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
000049: *Mar 1 01:52:30.900: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
000050: *Mar 1 01:52:31.040: %DOT11-4-MAXRETRIES: Packet to client 60f8.1db9.a5ce reached max retries, removing the client
000051: *Mar 1 01:52:31.222: %DOT11-4-MAXRETRIES: Packet to client 60f8.1db9.a5ce reached max retries, removing the client
000052: *Mar 1 01:52:31.388: %DOT11-4-MAXRETRIES: Packet to client 60f8.1db9.a5ce reached max retries, removing the client
000053: *Mar 1 01:52:31.563: %DOT11-4-MAXRETRIES: Packet to client 60f8.1db9.a5ce reached max retries, removing the client
000054: *Mar 1 01:52:31.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
000055: *Mar 1 01:52:34.986: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 60f8.1db9.a5ce Reassociated KEY_MGMT[WPAv2 PSK]回答 1
Network Engineering用户
回答已采纳
发布于 2016-05-11 06:30:28
正如里奇·梁在评论中所回答的那样，这似乎是固件c 1140-k9w7-mx.153-3.JB1的一个错误，并且至少在固件c1140-k9w7-mx.153-3.JC中得到了解决。我遇到的另一个问题似乎是由于硬件故障引起的。
页面原文内容由Network Engineering提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://networkengineering.stackexchange.com/questions/30217
复制相关文章
相似问题
腾讯云开发者
