思科3064交换机从6.0.x升级到7.0.x
思科3064交换机从6.0.x升级到7.0.x
提问于 2017-11-14 15:16:28
我正在尝试从6.0.2.U6.5c升级到nxos.7.0.3.I4.7，在升级之前，我想确保它通过了所有的检查，但是我得到了这个错误。这个开关还没有投入生产，但希望确保它运行良好和顺利。我做错什么了吗？
放映版本：
Software
BIOS: version 2.6.0
loader: version N/A
kickstart: version 6.0(2)U6(5c)
system: version 6.0(2)U6(5c)
Power Sequencer Firmware:
Module 1: version v1.0
SFP uC: version 2.12
BIOS compile time: 08/06/2014
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U6.5c.bin
kickstart compile time: 4/6/2016 22:00:00 [04/07/2016 05:46:42]
system image file is: bootflash:///n3000-uk9.6.0.2.U6.5c.bin
system compile time: 4/6/2016 22:00:00 [04/07/2016 06:14:31]验证图像的冲击和失败
switch# show install all impact system bootflash:nxos.7.0.3.I4.7.bin
Installer is forced disruptive
Verifying image bootflash:/n3000-uk9-kickstart.6.0.2.U6.5c.bin for boot variable "kickstart".
[########################################] 100% -- SUCCESS
Verifying image bootflash:/nxos.7.0.3.I4.7.bin for boot variable "system".
[########################################] 100% -- SUCCESS
Verifying image type.
[########################################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/nxos.7.0.3.I4.7.bin.
[# ] 0% -- FAIL. Return code 0x404F0003 (SRG file not present/cannot be opened).
Pre-upgrade check failed. Return code 0x40930012 (SRG extraction failed).我也有足够的空间：
switch# dir
4096 Nov 06 20:29:22 2017 .patch/
168 Nov 06 17:48:27 2017 20171106_174415_poap_3725_init.log
0 Nov 13 14:31:14 2017 20171113_143114_poap_3935_init.log
173 Nov 14 14:03:20 2017 dhclient_log
640 Oct 21 23:06:15 2013 license_FOC1734R15X_13_1.lic
37857280 Nov 06 19:52:06 2017 n3000-uk9-kickstart.6.0.2.U6.5c.bin
206969903 Nov 06 19:47:52 2017 n3000-uk9.6.0.2.U6.5c.bin
702663680 Nov 13 20:53:54 2017 nxos.7.0.3.I4.7.bin
1024 Nov 06 20:29:05 2017 sprom_cstruct_2_0_0
1024 Nov 06 20:29:40 2017 sprom_cstruct_3_0_0
4096 Jan 29 23:00:20 2010 vdc_2/
4096 Jan 29 23:00:20 2010 vdc_3/
4096 Jan 29 23:00:20 2010 vdc_4/
4096 Nov 06 20:29:23 2017 virtual-instance/
Usage for bootflash://
1078501376 bytes used
816668672 bytes free
1895170048 bytes total注意:我还验证没有基于此bug https://bst.cloudapps.cisco.com/bugsearch/bug/CSCut84783/?referring_site=bugquickviewredir打开TCP连接。
回答 2
Network Engineering用户
回答已采纳
发布于 2017-11-14 21:51:35
Soution:
对于测试，我已经下载了7.0(3)I4(4) nx-os文件，但是同样的问题，没有运气:(
但后来我决定只安装而不是验证，这是有效的！
switch# install all nxos bootflash:nxos.7.0.3.I4.4.bin
Installer is forced disruptive
Verifying image bootflash:/nxos.7.0.3.I4.4.bin for boot variable "nxos".
[########################################] 100% -- SUCCESS
Verifying image type.
[########################################] 100% -- SUCCESS
Extracting "nxos" version from image bootflash:/nxos.7.0.3.I4.4.bin.
[########################################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/nxos.7.0.3.I4.4.bin.
[########################################] 100% -- SUCCESS
Performing runtime checks.
[########################################] 100% -- SUCCESS
Performing module support checks.
[########################################] 100% -- SUCCESS
Notifying services about system upgrade.
[########################################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset Unsupported in new image, module needs to be powered off
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 kickstart 6.0(2)U6(5c) 7.0(3)I4(4) yes
1 bios v4.0.0(12/05/2016) v3.8.0(01/25/2016) no
1 SFP-uC v2.12 v0.0 no
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y 鸡肉晚餐！
放映版本：
Software
BIOS: version 4.0.0
NXOS: version 7.0(3)I4(4)
BIOS compile time: 12/05/2016
NXOS image file is: bootflash:///nxos.7.0.3.I4.4.bin
NXOS compile time: 10/24/2016 15:00:00 [10/24/2016 22:44:16]
Hardware
cisco Nexus3000 C3064PQ Chassis
Intel(R) Celeron(R) CPU P4505 @ 1.87GHz with 3903432 kB of memory.
Processor Board ID FOC17211CBG
Device name: switch
bootflash: 1596672 kB
usb1: 0 kB (expansion flash)Network Engineering用户
发布于 2017-11-14 18:46:28
由于新的NX版本7有很大的变化，所以只有几种升级的可能性。来自Cisco发布说明白皮书：
您可以执行从以下版本到CiscoNX-OSRelease7.0(3)I7(1)的服务软件升级(ISSU)：
- 7.0(3)I6(1)
- 7.0(3)i5(2)
- 7.0(3)i5(1)
--唯一支持升级的方法是安装Version6.0(2)U6(3)，因为需要升级BIOS。如果没有7.0(3)I7(1) BIOS版本，7.0(3)I7(1)映像将不会加载.
页面原文内容由Network Engineering提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://networkengineering.stackexchange.com/questions/45738
复制相关文章
相似问题
腾讯云开发者
