blocks|key|5550151|text|尝试来自Play+Store的"AirDroid“应用程序。它允许您使用基于浏览器的界面(在计算机上)从Windows/Linux传输文件。因为它是基于浏览器的UI，所以不需要在pc端安装任何东西。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|entityMap^0^^$0|@$1|2|3|4|5|6|7|C|8|@]|9|@]|A|$]]]|B|$]]

Try the "AirDroid" App from Play Store. It allows you to use a browser based interface (on your computer) to transfer files from a Windows/Linux pc. Since it's browser based UI, no need to install anything on the pc side.

blocks|key|626303|text|安装gmtp，并使用它连接到电话或平板电脑：|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|626304|sudo+apt-get+install+gmtp|code-block|syntax|javascript|entityMap|0|LINK|mutability|MUTABLE|url|http://gmtp.sourceforge.net/^0|2|4|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]]|C|$]]|$1|D|3|E|5|F|7|T|8|@]|9|@]|C|$G|H]]]|I|$J|$5|K|L|M|C|$N|O]]]]

Install <a href="http://gmtp.sourceforge.net/">gmtp</a>, and use it to connect to the phone or tablet :

<pre><code>sudo apt-get install gmtp
</code></pre>

blocks|key|5550367|text|您只需安装jmtpfs+(通过sudo+apt-get+install+jmtpfs)。通过USB连接您的手机后，在您的手机上启用MTP文件传输，它将作为USB设备显示在您的计算机上。然后，您可以访问Android设备的整个文件系统(不仅仅是图片，比如PTP)。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|5550368|这为我与(K)Ubuntu+14.04+LTS和我的摩托罗拉Moto+G。|entityMap^0|5|6|F|R|0^^$0|@$1|2|3|4|5|6|7|I|8|@$9|J|A|K|B|C]|$9|L|A|M|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|N|8|@]|D|@]|E|$]]]|H|$]]

You just install <code>jmtpfs</code> (via <code>sudo apt-get install jmtpfs</code>). After connecting your phone via USB, enable the MTP file transfer on your phone and it will show up as USB device on your computer. You can then access the whole file system (and not only the pictures, as with PTP) of your Android device.

This worked for me with (K)Ubuntu 14.04 LTS and my Motorola Moto G.

blocks|key|5549963|text|看看这个：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5549964|http://forum.xda-developers.com/showthread.php?t=1643757|offset|length|5549965|这是：|5549966|http://research.jacquette.com/jmtpfs-exchanging-files-between-android-devices-and-linux/|5549967|从MTP到PTP+(摄像机传输模式)的转换也适用于海神，至少对内置内存也是如此。|entityMap|0|LINK|mutability|MUTABLE|url|1^0|0|0|1K|0|0|0|0|2G|1|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@$D|U|E|V|1|W]]|A|$]]|$1|F|3|G|5|6|7|X|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Y|8|@]|9|@$D|Z|E|10|1|11]]|A|$]]|$1|J|3|K|5|6|7|12|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|C]]|R|$5|N|O|P|A|$Q|I]]]]

Have a look at this:

<a href="http://forum.xda-developers.com/showthread.php?t=1643757">http://forum.xda-developers.com/showthread.php?t=1643757</a>

And this:

<a href="http://research.jacquette.com/jmtpfs-exchanging-files-between-android-devices-and-linux/">http://research.jacquette.com/jmtpfs-exchanging-files-between-android-devices-and-linux/</a>

Changing from MTP to PTP (camera transfer mode) also works with nautilus, at least with the built-in memory.

blocks|key|5549866|text|文件传输不需要GUI+(+Ubuntu上没有人对只为文件传输创建GUI感兴趣)。Nautilus也不需要插件。我使用三星Galaxy+(Android2.2~+Froyo)，到目前为止，我通过三种方式进行文件传输:蓝牙连接、电缆连接或使用Ubuntu应用程序。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5549867|对于电缆连接，您可以很容易地作为插头电缆，等待一段时间，并选择大容量存储模式。通过Nautilus访问和文件传输。如果你想把手机做成调制解调器，去这里：http://shiliarr95z.weebly.com/2/post/2011/07/connecting-samsung-galaxy-mini-android-phone-to-ubuntu-1104-as-modem.html。|offset|length|5549868|对于蓝牙连接，您可以到这里：http://shiliarr95z.weebly.com/2/post/2011/08/howto-transfer-files-via-bluetooth-laptop-to-samsung-galaxy-mini-android-phone-vice-versa.html有点复杂，但也很有趣。|5549869|使用Ubuntu应用程序是最简单的。在手机方面，只需进入Android市场并安装Ubuntu应用程序即可。照片分享瞬间在后台运行。在Ubuntu方面，只需在Ubuntu上注册即可(单击信封图标并选择Ubuntu+)。而且，您在电话端有GUI+(在Ubuntu端，您只有一个OSD消息)|entityMap|0|LINK|mutability|MUTABLE|url|http://shiliarr95z.weebly.com/2/post/2011/07/connecting-samsung-galaxy-mini-android-phone-to-ubuntu-1104-as-modem.html|1|http://shiliarr95z.weebly.com/2/post/2011/08/howto-transfer-files-via-bluetooth-laptop-to-samsung-galaxy-mini-android-phone-vice-versa.html^0|0|24|3A|0|0|E|3V|1|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@$D|U|E|V|1|W]]|A|$]]|$1|F|3|G|5|6|7|X|8|@]|9|@$D|Y|E|Z|1|10]]|A|$]]|$1|H|3|I|5|6|7|11|8|@]|9|@]|A|$]]]|J|$K|$5|L|M|N|A|$O|P]]|Q|$5|L|M|N|A|$O|R]]]]

There is no GUI needed for file transfer (No One on Ubuntu is interested in making a GUI for only file transfer). And there is no need for plugins for Nautilus either. I Use Samsung Galaxy Mini (Android 2.2 ~ Froyo), and I'm doing file transfer so far by three ways, Bluetooth connection, Cable connection or using Ubuntu One app. 

For cable connection you can do it easily as plug the cable, wait a while and choose mass storage mode. Access and File Transfer via Nautilus. If you want to make the phone as modem, go here: <a href="http://shiliarr95z.weebly.com/2/post/2011/07/connecting-samsung-galaxy-mini-android-phone-to-ubuntu-1104-as-modem.html" rel="nofollow">http://shiliarr95z.weebly.com/2/post/2011/07/connecting-samsung-galaxy-mini-android-phone-to-ubuntu-1104-as-modem.html</a>. 

For Bluetooth Connection, you can go here : <a href="http://shiliarr95z.weebly.com/2/post/2011/08/howto-transfer-files-via-bluetooth-laptop-to-samsung-galaxy-mini-android-phone-vice-versa.html" rel="nofollow">http://shiliarr95z.weebly.com/2/post/2011/08/howto-transfer-files-via-bluetooth-laptop-to-samsung-galaxy-mini-android-phone-vice-versa.html</a> a bit complicated but fun as well. 

Using Ubuntu app is the easiest one. On the phone side,just go to Android market and install the Ubuntu one app. photo sharing runs in the background in an instant. On the Ubuntu side, just register yourself on Ubuntu One (click the envelope icon and choose Ubuntu One). And, You Have GUI on the phone side (On the Ubuntu side, you got only an OSD Message)

blocks|key|626460|text|对于技术上的菜鸟(包括我)，我发现从SD复制文件(S)/Photo(S)并将其粘贴到电话内存上的DCIM将允许我使用USB摄像头模式进行复制。然后删除手机文件，一旦你下载到PC，如果你想清除手机内存。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|626461|去看我的档案。|ordered-list-item|626462|选择extSDCard|626463|在本例中，我将选择DCIM。|626464|按左下角的“设置”按钮。|626465|选择副本。|626466|要复制的文件的复选框。|626467|右上角按副本。|626468|退出我的档案。9选择sdcard0|626469|626470|按右上角粘贴。|626471|退出，在USB选项中选择相机模式，您应该能够使用简单的“我的计算机”进行传输。|entityMap^0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|Z|8|@]|9|@]|A|$]]|$1|E|3|F|5|D|7|10|8|@]|9|@]|A|$]]|$1|G|3|H|5|D|7|11|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|12|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|13|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|14|8|@]|9|@]|A|$]]|$1|O|3|P|5|D|7|15|8|@]|9|@]|A|$]]|$1|Q|3|R|5|D|7|16|8|@]|9|@]|A|$]]|$1|S|3|H|5|D|7|17|8|@]|9|@]|A|$]]|$1|T|3|U|5|D|7|18|8|@]|9|@]|A|$]]|$1|V|3|W|5|D|7|19|8|@]|9|@]|A|$]]]|X|$]]

For the technically noob (including me) I found just copying the file(s)/Photo(s) from the SD and pasting it to the DCIM on the phone memory will allow me to copy using the USB camera mode. Then delete the phone file once you download to PC if you need want to clear the phone memory.

<ol>
<li>Go to My Files.</li>
<li>Select extSDCard</li>
<li>In this example I will select DCIM</li>
<li>Press the settings button on bottom left.</li>
<li>Select Copy.</li>
<li>Check box of files to be copied.</li>
<li>Press copy on top right.</li>
<li>Exit back to My Files.
9 Select sdcard0</li>
<li>In this example I will select DCIM</li>
<li>Press paste in top right.</li>
<li>Exit out, select camera mode in the USB option and you should be able to transfer using simple "my computer". </li>
</ol>

blocks|key|5549771|text|📷|type|atomic|depth|inlineStyleRanges|entityRanges|offset|length|data|5549772|从主屏幕按菜单>设置>连接到PC+>在此菜单中，确保“询问我”被选中，如果你想让它弹出，并问你想要什么样的连接类型，当你插入计算机。|unstyled|5549773|或者您也可以从该菜单中设置默认操作。您可以设置为只充电，HTC同步，磁盘驱动器，移动宽带连接。|5549774|然后，Ubuntu将简单地将其检测为MTP。|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://i.stack.imgur.com/Uw8lr.png|imageAlt^0|0|1|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@$A|T|B|U|1|V]]|C|$]]|$1|D|3|E|5|F|7|W|8|@]|9|@]|C|$]]|$1|G|3|H|5|F|7|X|8|@]|9|@]|C|$]]|$1|I|3|J|5|F|7|Y|8|@]|9|@]|C|$]]]|K|$L|$5|M|N|O|C|$P|Q|R|-4]]]]

<img src="https://i.stack.imgur.com/Uw8lr.png" alt="Android USB">

From the home screen press Menu > Settings > Connect to PC > in this menu, make sure "Ask Me" is selected, if you want it to pop-up and ask you what connection type you want when you plug into the computer.

Or you can set a default action from this menu as well. You can set it to Charge Only, HTC Sync, Disk Drive, Mobile Broadband Connect.

Then Ubuntu will simply detect it as a MTP.

blocks|key|5549897|text|如果你不能通过节奏盒传输歌曲，你可以，就像其他人指出的那样，使用海量存储传输文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5549898|在我的三星Galaxy+S+II上，你可以这样做:应用程序->设置->连接设置->USB大容量存储|5549899|然后，如果您插入USB电缆，它应提示您进入USB大容量存储模式。如果你答应的话，你的手机就可以通过Nautilus找到。|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|H|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|I|8|@]|9|@]|A|$]]]|F|$]]

If you can't transfer songs through Rhythmbox you can, like others have pointed out, transfer files using mass storage.

On my Samsung Galaxy S II you do it by going:
Applications->Settings->Connection settings->USB mass storage

Then if you plug in the USB cable it should prompt you to go to USB mass storage mode. If you say yes your phone will be available through Nautilus.

blocks|key|626378|text|libmtp的git主支支持S3。如果您知道如何从源代码安装/编译，则可以在新版本发布之前使用它。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|626379|我现在不在Ubuntu机器上，所以不幸的是，我不能给出编译所需的依赖关系的确切说明，但是它应该遵循以下的思路：|626380|git+clone+git://libmtp.git.sourceforge.net/gitroot/libmtp/libmtp
cd+libmtp

sudo+apt-get+install+libtool+libusb-dev+checkinstall

./autogen.sh++(answering+yes+to+any+questions)
./configure+--prefix=/usr/
make
sudo+checkinstall++(answering+any+questions)|code-block|syntax|javascript|626381|然后，您可能应该将它放入一个.deb包中，这样您就可以在不破坏要使用的程序的依赖关系的情况下安装它。我不知道，但将源代码编译成DEB包似乎提供了信息。|entityMap|0|LINK|mutability|MUTABLE|url|http://libmtp.git.sourceforge.net/git/gitweb-index.cgi|1|https://askubuntu.com/questions/140998/compiling-source-into-a-deb-package^0|0|C|0|0|0|0|1K|B|1^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@$A|W|B|X|1|Y]]|C|$]]|$1|D|3|E|5|6|7|Z|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|10|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|11|8|@]|9|@$A|12|B|13|1|14]]|C|$]]]|M|$N|$5|O|P|Q|C|$R|S]]|T|$5|O|P|Q|C|$R|U]]]]

The <a href="http://libmtp.git.sourceforge.net/git/gitweb-index.cgi" rel="nofollow noreferrer">git master branch of libmtp</a> supports the S3. If you know how to install / compile from source, you can use this until a new version is released.

I'm not on an Ubuntu machine right now, so I unfortunately can't give exact instructions regarding dependencies for compiling, etc. But it should be along the following lines:

<pre><code>git clone git://libmtp.git.sourceforge.net/gitroot/libmtp/libmtp
cd libmtp

sudo apt-get install libtool libusb-dev checkinstall

./autogen.sh (answering yes to any questions)
./configure --prefix=/usr/
make
sudo checkinstall (answering any questions)
</code></pre>

Then, you should probably make it into a .deb package, so you can install it without breaking dependencies of the programs you want to use. I'm out of my knowledge, but <a href="https://askubuntu.com/questions/140998/compiling-source-into-a-deb-package">Compiling source into a DEB package</a> seems to provide info.

blocks|key|5550228|text|我又找到了一个名为"Qlix“的应用程序。您可以从ubuntu软件中心下载它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5550229|它用于将文件从PC传输到Android移动电话。|5550230|谢谢|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|H|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|I|8|@]|9|@]|A|$]]]|F|$]]

I have found one more application named "Qlix".
You can download it from ubuntu software center.

It is for transferring files from PC to Android mobile phone.

Thanks

blocks|key|5550342|text|通过wifi在Ubuntu和Android手机之间传输文件：|type|header-two|depth|inlineStyleRanges|entityRanges|data|5550343|安卓手机上的施恩德应用程序允许你在安卓和个人电脑之间传输文件。|unstyled|offset|length|5550344|步骤：|5550345|从playstore在Android设备上安装Xender应用程序。|unordered-list-item|5550346|通过遵循这方法在Ubuntu上创建wifi热点并打开它。|5550347|通过创建的热点将您的手机连接到pc。|5550348|现在打开xender应用程序并在“设置”菜单上选择“连接PC”选项。|5550349|它将生成一个地址(如ip地址)。|5550350|把这个地址放到你的浏览器上，现在你可以在手机和电脑之间传输文件了。|5550351|📷|atomic|entityMap|0|LINK|mutability|MUTABLE|url|https://play.google.com/store/apps/details?id=cn.xender|1|https://askubuntu.com/a/370749/202806|2|IMAGE|IMMUTABLE|imageUrl|https://i.stack.imgur.com/N0Yi3.png|imageAlt^0|0|6|3|0|0|0|0|4|1|1|0|0|0|0|0|0|1|2^^$0|@$1|2|3|4|5|6|7|1D|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|1E|8|@]|9|@$E|1F|F|1G|1|1H]]|A|$]]|$1|G|3|H|5|6|7|1I|8|@]|9|@]|A|$]]|$1|I|3|J|5|K|7|1J|8|@]|9|@]|A|$]]|$1|L|3|M|5|K|7|1K|8|@]|9|@$E|1L|F|1M|1|1N]]|A|$]]|$1|N|3|O|5|K|7|1O|8|@]|9|@]|A|$]]|$1|P|3|Q|5|K|7|1P|8|@]|9|@]|A|$]]|$1|R|3|S|5|K|7|1Q|8|@]|9|@]|A|$]]|$1|T|3|U|5|K|7|1R|8|@]|9|@]|A|$]]|$1|V|3|W|5|X|7|1S|8|@]|9|@$E|1T|F|1U|1|1V]]|A|$]]]|Y|$Z|$5|10|11|12|A|$13|14]]|15|$5|10|11|12|A|$13|16]]|17|$5|18|11|19|A|$1A|1B|1C|-4]]]]

<h2>Transfer files between Ubuntu PC and your Android phone via wifi:</h2>
<a href="https://play.google.com/store/apps/details?id=cn.xender" rel="nofollow noreferrer">Xender</a> application on your android phone allows you to transfer files between Android and PC.
Steps:
<ul>
<li>Install Xender application on your Android device from playstore.
</li>
<li>Create wifi hotspot on your Ubuntu pc by following <a href="https://askubuntu.com/a/370749/202806">this</a> method and turn it on.
</li>
<li>Connect your phone to pc via the created hotspot.
</li>
<li>Now open xender application and select &quot;Connect PC&quot; option on the settings menu.
</li>
<li>It will generate an address, (Like an ip-address).
</li>
<li>Put that address on your web-browser.Now you can transfer files between your phone and PC.
<img src="https://i.stack.imgur.com/N0Yi3.png" alt="enter image description here" />
</li>
</ul>

blocks|key|5550380|text|我在Kubuntu上安装了用于Linux的Android文件传输并工作|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|entityMap|0|LINK|mutability|MUTABLE|url|https://snapcraft.io/install/android-file-transfer-linux/kubuntu^0|D|J|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@$A|L|B|M|1|N]]|C|$]]]|D|$E|$5|F|G|H|C|$I|J]]]]

I installed <a href="https://snapcraft.io/install/android-file-transfer-linux/kubuntu" rel="nofollow noreferrer">Android File Transfer for Linux - MTP</a> on Kubuntu and worked

blocks|key|626547|text|我也有过类似的问题，我的Note4正在工作，但我的S8没有工作。为了解决这个问题，我安装了普通的go-mtpfs和gvfs-fuse，但主要是limesuite-udev修复了所有的东西。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|626548|sudo+apt+install+-y+go-mtpfs+gvfs-fuse+limesuite-udev|offset|length|style|CODE|626549|当然，您的USB首选项设置为文件传输或MTP。|entityMap^0|0|0|1H|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@$D|M|E|N|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|O|8|@]|9|@]|A|$]]]|J|$]]

I had a similar issue, my Note4 was working but my S8 was not.
To fix that I installed the usual go-mtpfs and gvfs-fuse, but mainly limesuite-udev fixed everything.
<code>sudo apt install -y go-mtpfs gvfs-fuse limesuite-udev</code>
Of course your USB Preferences as to be set for File Transfer or MTP.

How does one connect an <a href="http://code.google.com/p/android/issues/detail?id=32933">MTP</a> device to Ubuntu via USB? Many popular devices, such as all Android 4.0 phone, have only MTP or PTP as a connection option, no USB mass storage <a href="http://forum.xda-developers.com/showthread.php?p=24010029">anymore</a>.

Considering the popular Samsung S3: connecting as either MTP or PTP: neither allows one to see pictures saved as default by phone camera to DCIM folder on external SD card. Similar problems with previous models (with Android 2.x) were solvable by 'usb utilities' in wireless &amp; networking settings, but this is no longer present in Android 4.0.

How to connect MTP devices via USB?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

如何通过USB将MTP设备连接到Ubuntu？许多流行的设备，如所有的Android4.0手机，只有MTP或PTP作为连接选项，没有USB海量存储更多。考虑到流行的三星S3:连接为MTP或PTP:两者都不允许人们看到默认情况下手机摄像头保存到外部SD卡上的DCIM文件夹中的图片。以前的型号(使用Android2.x)的类似问题可以通过无线和网络设置中的“usb实用程序”解决，但这在Android4

问如何通过USB连接MTP设备？
EN

回答 13

Ask Ubuntu用户

Ask Ubuntu用户

Ask Ubuntu用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何通过USB连接MTP设备？EN

回答 13

Ask Ubuntu用户

Ask Ubuntu用户

Ask Ubuntu用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何通过USB连接MTP设备？
EN