blocks|key|2745425|text|如果没有一些定制的墨盒，这是不可能的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2745426|解决这个问题的一种方法是获取Retro+Replay插件，并为它破解自己的代码。|2745427|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

This is not possible without some custom cartridge.

One way to fix this would be getting the Retro Replay cartridge and hacking your own code for it.

blocks|key|2535634|text|我怀疑有没有办法做到这一点；你需要一个处理这种情况的墨盒，而我不认为存在这样的墨盒。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2535635|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I doubt there is a way to do it; you would need a cartridge which handles this case and I don't think one like that exists.

blocks|key|2535733|text|实际上，更好、更合适的解决方案是EasyFlash。Retro+Replay通常与它自己的只读存储器一起使用。由于它是一个非常有用的默认ROM的盒式存储器，我永远不会闪存另一个ROM到它。此外，如果你没有任何这些墨盒，它比EasyFlash更贵。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2535734|目前，我有Prince+Of+Persia+(!)c64被写入我的EasyFlash，当我打开我的ROM时，它会自动运行，就像你要求的那样。|2535735|entityMap^0|G|9|Q|C|33|9|0|5|G|X|9|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|Q|8|@$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|V|8|@]|D|@]|E|$]]]|I|$]]

A better and more suitable solution is <code>EasyFlash</code> actually. <code>Retro Replay</code> is commonly used with its own ROM. Since it is a very useful cartridge by default ROM, I would never flash another ROM to it. Also it is more expensive than <code>EasyFlash</code> if you don't have any of those cartridges.

At the moment, I have <code>Prince Of Persia</code> (!) ROM written to my <code>EasyFlash</code> and when I open my c64, it autoruns just like you asked for.

blocks|key|52260|text|你只需要写一个命令，像LOAD"*",8,1这样的命令就足够了。那么，我可以假设那个特定命令的唯一问题是它只加载程序，而不是自动运行程序吗？如果是这样的话，您有许多解决方案：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|52261|如果它是一个机器语言程序，那么你应该输入LOAD"<FILENAME>",8,1:，然后(不按<RETURN>)按<SHIFT>%2B<RUN/STOP>.|52262|If，这是一个基本程序，输入LOAD"<FILENAME>",8,1:，然后(不按LOAD"<FILENAME>",8:+)，然后(不按<RETURN>)，可以编写一个基本程序，这样当你用LOAD"<FILENAME>",8,1加载它时，它就会自动运行。为此，首先将以下行添加到程序的开头：|unordered-list-item|52263|52264|0+POKE770,131:POKE771,164|52265|然后发出以下命令来保存程序：|52266|PRINT"{CLR}":POKE770,113:POKE771,168:POKE43,0;POKE44,3:POKE157,0:SAVE"",8|52267|entityMap^0|B|B|0|K|L|1B|8|1L|7|1T|A|0|E|L|15|J|1W|8|2M|K|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@$9|X|A|Y|B|C]|$9|Z|A|10|B|C]|$9|11|A|12|B|C]|$9|13|A|14|B|C]]|D|@]|E|$]]|$1|H|3|I|5|J|7|15|8|@$9|16|A|17|B|C]|$9|18|A|19|B|C]|$9|1A|A|1B|B|C]|$9|1C|A|1D|B|C]]|D|@]|E|$]]|$1|K|3|-4|5|6|7|1E|8|@]|D|@]|E|$]]|$1|L|3|M|5|6|7|1F|8|@]|D|@]|E|$]]|$1|N|3|O|5|6|7|1G|8|@]|D|@]|E|$]]|$1|P|3|Q|5|6|7|1H|8|@]|D|@]|E|$]]|$1|R|3|-4|5|6|7|1I|8|@]|D|@]|E|$]]]|S|$]]

You write that a command that you type in, like <code>LOAD"*",8,1</code> would be adequate. Can I assume, then, that the only problem with that particular command is that it only loads, but doesn't automatically run, the program? If so, you have a number of solutions:

<ol>
<li>If it's a machine language program, then you should type <code>LOAD"&lt;FILENAME&gt;",8,1:</code> and then (without pressing <code>&lt;RETURN&gt;</code>) press <code>&lt;SHIFT&gt;</code>+<code>&lt;RUN/STOP&gt;</code>.</li>
<li>If it's a BASIC program, type <code>LOAD"&lt;FILENAME&gt;",8:</code> and then (without pressing <code>&lt;RETURN&gt;</code>) press <code>&lt;SHIFT&gt;</code>+<code>&lt;RUN/STOP&gt;</code>.</li>
<li>It is possible to write a BASIC program such that it automatically runs when you load it with <code>LOAD"&lt;FILENAME&gt;",8,1</code>. To do so, first add the following line to the beginning of your program:

<pre><code>0 POKE770,131:POKE771,164
</code></pre>

Then issue the following commands to save the program:

<pre><code>PRINT"{CLR}":POKE770,113:POKE771,168:POKE43,0;POKE44,3:POKE157,0:SAVE"&lt;FILENAME&gt;",8
</code></pre></li>
</ol>

blocks|key|2535782|text|不是100%25相关，但C128可以在C128模式下自动引导磁盘。例如，Ultima+V(它在C128上有音乐，但在C64或C64模式下的C128上没有)自动引导。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2535783|至于磁带盒，我推荐1541+Ultimate+2。它也可以运行模块rom图像中的游戏(虽然波斯王子由于某种原因不适合我，也许是软件问题？)，但你也可以得到相当好的软盘仿真器(这也使得将东西转移到真实磁盘更容易)，REU，磁带接口(如果你订购)等。|2535784|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Not 100% relevant, but C128 can autoboot disks in C128 mode. For example Ultima V (which has musics on C128 but not on C64 or C128 in C64 mode) autoboots.

As for cartridges, I'd recommend 1541 Ultimate 2. It can also run games from module rom images (although Prince of Persia doesn't work for me for some reason, perhaps software issue?), but you also get rather good floppy emulator (which also makes it easier to transfer stuff to real disks), REU, tape interface (if you order it) etc.

blocks|key|2535838|text|如果您正在使用ML程序，有几种方法。如果你不担心在没有重置的情况下返回到正常的就绪提示，你可以有一个小的加载器加载到堆栈中($0100-$01FF)加载器只会加载下一段代码，然后跳转到它。它将从0102美元起，并需要尽可能小。很多时候，下一个要加载的部分只有2个字符，所以文件名可以放在$0100+&+$0101。然后你需要做的就是给它设置LFS，SETNAM，LOAD，JMP。用$01填充堆栈区域的其余部分。同样安全的做法是只节省$0100-$010d，这样整个程序就可以放在一个磁盘块中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2535839|这样做的一个问题是，它清除了过去的堆栈条目(因此，您的程序需要将堆栈指针重置回顶部)。如果你的程序试图自己做一个正常的RTS，随机的事情可能会发生。如果您想要退出程序，您将需要jmp到重置向量(默认情况下是$FFFC)。|2535840|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

If you are working with a ML program, there are several methods. If you aren't worried about ever returning to normal READY prompt without a RESET, you can have a small loader that loads into the stack ($0100-$01FF) The loader would just load the next section of code, then jump to it. It would start at $0102 and needs to be as small as possible. Many times, the next piece to load is only 2 characters, so the file name can be placed at $0100 &amp; $0101. Then all you need to do is set LFS, SETNAM, LOAD, then JMP to it. Fill the rest of the stack area with $01. It is also rather safe to only save $0100-$010d so that the entire program will fit on a single disk block.
One issue with this, is that it clears out past stack entries (so, your program will need to reset the stack pointer back to the top.) If your program tries to do a normal RTS out of itself, random things can occur. If you want to exit the program, you'll need to jmp to the reset vector ($FFFC by default,) to do so.

Good news, my c64 ist still running after lots of years spending time on my attic.. 
But what I always wanted to know is:

How can I automatically load &amp; run a program from a floppy disk that is already inserted 
when I switch on the c64?

Some auto-running command like <code>load "*",8,1</code> would be adequate...

Regards 
MoC

How to autostart a program from floppy disk on a Commodore c64

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

好消息是，我的c64在我的阁楼上呆了很多年后还在运行。但我一直想知道的是：如何从已插入的软盘中自动加载和运行程序当我打开c64的时候？像load "*",8,1这样的自动运行命令就足够了……问候MoC

问如何从Commodore c64软盘自动启动程序
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何从Commodore c64软盘自动启动程序EN