blocks|key|180079|text|有同样的H:问题。在执行cli之前，在dos+shell中将home驱动器设置为某个目录。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180080|set+HOMEDRIVE=C:/conf/rabbitmq+::+Or+your+favorite+dir+
rabbitmq-plugins.bat+enable+rabbitmq_management|code-block|syntax|javascript|180081|使用C盘中的文件夹。rabbitmq系统将在那里写入cookie文件。|180082|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

Had the same H: problem. Set the home drive to some dir in the dos shell before executing the cli.

<pre><code>set HOMEDRIVE=C:/conf/rabbitmq :: Or your favorite dir 
rabbitmq-plugins.bat enable rabbitmq_management
</code></pre>

Use a folder in C drive. The rabbitmq system will write the cookie file there.

blocks|key|177577|text|在您的PC中找到".erlang.cookie“的位置，并运行以下命令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|177578|set+HOMEDRIVE=[location+of+".erlang.cookie"]
rabbitmq-plugins.bat+enable+rabbitmq_management|code-block|syntax|javascript|177579|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Find location of ".erlang.cookie" in your PC and run the commands bellow:

<pre><code>set HOMEDRIVE=[location of ".erlang.cookie"]
rabbitmq-plugins.bat enable rabbitmq_management
</code></pre>

blocks|key|177595|text|在某些情况下，您的HOMEDRIVE和HOMEPATH会被组策略(active+directory用户)覆盖，然后您需要在每次启动RabbitMQ服务时设置HOMEDRIVE变量。在这种情况下，您可以做的是：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|177596|177597|rabbitmq-service+remove服务|ordered-list-item|offset|length|style|CODE|177598|177599|编辑rabbitmq-service.bat文件的|BOLD|177600|：|177601|177602|"!ERLANG_HOME!\bin\erl.exe“%5E+-pa+"!RABBITMQ_EBIN_ROOT!”%5E+-boot+!CLEAN_BOOT_FILE！%5E+-noinput+-hidden+%5E+-s+rabbit_prelaunch+%5E+-setcookie+"C:\Users\userName\“%5E+<<<这是存放cookie的地方!RABBITMQ_NAME_TYPE！-conf_advanced预启动！随机！！时间：~9！@LOCALHOST%5E-conf_advanced+"!RABBITMQ_ADVANCED_CONFIG_FILE!“%5E+..."|177603|177604|保存脚本|177605|177606|在安装service之前更改本地驱动器|177607|177608|rabbitmq-service+install重新安装|177609|服务|177610|现在，每次重新启动时，您的服务都会自动启动，并且所有路径都是OK的！|177611|entityMap^0|0|0|0|N|0|0|2|K|0|0|0|0|0|0|0|0|0|0|O|0|0|0^^$0|@$1|2|3|4|5|6|7|17|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|18|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|19|8|@$F|1A|G|1B|H|I]]|9|@]|A|$]]|$1|J|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|1D|8|@$F|1E|G|1F|H|M]]|9|@]|A|$]]|$1|N|3|O|5|E|7|1G|8|@]|9|@]|A|$]]|$1|P|3|-4|5|6|7|1H|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1I|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|1J|8|@]|9|@]|A|$]]|$1|T|3|U|5|E|7|1K|8|@]|9|@]|A|$]]|$1|V|3|-4|5|6|7|1L|8|@]|9|@]|A|$]]|$1|W|3|X|5|6|7|1M|8|@]|9|@]|A|$]]|$1|Y|3|-4|5|6|7|1N|8|@]|9|@]|A|$]]|$1|Z|3|10|5|E|7|1O|8|@$F|1P|G|1Q|H|I]]|9|@]|A|$]]|$1|11|3|12|5|6|7|1R|8|@]|9|@]|A|$]]|$1|13|3|14|5|6|7|1S|8|@]|9|@]|A|$]]|$1|15|3|-4|5|6|7|1T|8|@]|9|@]|A|$]]]|16|$]]

There are cases when your HOMEDRIVE and HOMEPATH get overridden by group policy (active directory user) and than you'll need to set your HOMEDRIVE variable each time you want to start RabbitMQ service. In this case what you can do is:
<ol>
<li><code>rabbitmq-service remove</code> service
</li>
<li>edit rabbitmq-service.bat file:
<pre><code>&quot;!ERLANG_HOME!\bin\erl.exe&quot; ^
 -pa &quot;!RABBITMQ_EBIN_ROOT!&quot; ^
 -boot !CLEAN_BOOT_FILE! ^
 -noinput -hidden ^
 -s rabbit_prelaunch ^
 -setcookie &quot;C:\Users\userName\&quot; ^ &lt;&lt;&lt; this is a place of your cookie
 !RABBITMQ_NAME_TYPE! rabbitmqprelaunch!RANDOM!!TIME:~9!@localhost ^
 -conf_advanced &quot;!RABBITMQ_ADVANCED_CONFIG_FILE!&quot; ^
 ...&quot;
</code></pre>
</li>
<li>save the script
</li>
<li><code>set HOMEDRIVE=C:\Users\userName</code> change homedrive before installing service
</li>
<li><code>rabbitmq-service install</code> reinstall the service
</li>
</ol>
now each time your reboot your service starts automatically and all paths are OK!

blocks|key|2786649|text|虽然这看起来很明显，但你确实需要以管理员身份运行cmd+-我得到了上面的错误，直到我纠正了它。:-)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2786650|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

While this may seem totally obvious, you do need to run cmd &quot;as administrator&quot; - I was getting the above error until I remedied that. :-)

blocks|key|2786688|text|我按照以下步骤解决了这个问题：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2786689|2786690|打开文件："Program+Files/RabbitMQ+Server/rabbitmq_server-/sbin/rabbitmq-env"|ordered-list-item|2786691|2786692|2786693|在文件的末尾，追加一行：|2786694|2786695|.erlang.cookie环境清理set+BOOT_MODULE=+set+CONFIG_FILE=+set+FEATURE_FLAGS_FILE=+set+ENABLED_PLUGINS_FILE=+set+LOG_BASE=+set+MNESIA_BASE=+set+PLUGINS_DIR=+set+SCRIPT_DIR=+set+SCRIPT_NAME=+set+TDP0=+set+HOMEDRIVE=C：<<<+REM的新路径|2786696|2786697|打开RabbitMQ+console|2786698|2786699|2786700|写入：|2786701|2786702|4.1。rabbitmq-service+stop|offset|length|style|CODE|2786703|4.2。rabbitmq-service+remove|2786704|4.3。rabbitmq-service+install|2786705|4.4。rabbitmq-service+start|2786706|entityMap^0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|4|L|0|4|N|0|4|O|0|4|M|0^^$0|@$1|2|3|4|5|6|7|18|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|19|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|1A|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|1B|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|1D|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|1F|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|1G|8|@]|9|@]|A|$]]|$1|N|3|O|5|E|7|1H|8|@]|9|@]|A|$]]|$1|P|3|-4|5|6|7|1I|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|1J|8|@]|9|@]|A|$]]|$1|R|3|S|5|E|7|1K|8|@]|9|@]|A|$]]|$1|T|3|-4|5|6|7|1L|8|@]|9|@]|A|$]]|$1|U|3|V|5|6|7|1M|8|@$W|1N|X|1O|Y|Z]]|9|@]|A|$]]|$1|10|3|11|5|6|7|1P|8|@$W|1Q|X|1R|Y|Z]]|9|@]|A|$]]|$1|12|3|13|5|6|7|1S|8|@$W|1T|X|1U|Y|Z]]|9|@]|A|$]]|$1|14|3|15|5|6|7|1V|8|@$W|1W|X|1X|Y|Z]]|9|@]|A|$]]|$1|16|3|-4|5|6|7|1Y|8|@]|9|@]|A|$]]]|17|$]]

I solved the problem by following the steps below:
<ol>
<li>Open the file: &quot;Program Files/RabbitMQ Server/rabbitmq_server-/sbin/rabbitmq-env&quot;
</li>
<li>At the end of the file, append the line:
<pre><code>REM Environment cleanup
set BOOT_MODULE=
set CONFIG_FILE=
set FEATURE_FLAGS_FILE=
set ENABLED_PLUGINS_FILE=
set LOG_BASE=
set MNESIA_BASE=
set PLUGINS_DIR=
set SCRIPT_DIR=
set SCRIPT_NAME=
set TDP0=
set HOMEDRIVE=C: &lt;&lt;&lt; the new path of the .erlang.cookie

</code></pre>
</li>
<li>Open the RabbitMQ console
</li>
<li>write:
4.1. <code>rabbitmq-service stop</code> 
4.2. <code>rabbitmq-service remove</code> 
4.3. <code>rabbitmq-service install</code> 
4.4. <code>rabbitmq-service start</code> 
</li>
</ol>

blocks|key|177672|text|我们也遇到了同样的问题，组策略将HOMEDRIVE设置为h：，将HOMEPATH设置为/。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|177673|这里的其他解决方案都不起作用(尽管我们已经看到，在不同的环境中，修改sys+var确实对我们有效)。|177674|今天，我们创建了一个新的本地管理员帐户并从那里安装，从而解决了这个问题。|177675|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

We had the same issue where group policies have set HOMEDRIVE to h: and HOMEPATH to /.
None of the other solutions here worked (even though we have seen that modifying the sys vars did work for us in a different environment).
Today we solved this by creating a new local Administrator account and installing from there.

I am trying to run the following command 

<pre><code>rabbitmq-plugins.bat enable rabbitmq_management 
</code></pre>

and its giving me an error like this:

<blockquote>
 11:36:55.464 [error] Failed to create cookie file 'h:/.erlang.cookie': enoent
</blockquote>

I am using windows 7, Erlang Version R16B01 and RabbitMQ-Server version 3.1.5

I am using my work PC and our Corporate policy sets the HOMEDRIVE to h: and HOMEPATH to /
and i dont think they will let me change this.

I can see the .erlang.cookie file under C:\Windows.

Could someone let me know of a workaround for this ?

Thanks in advance !

Failed to Create Cookie file RabbitMQ in Windows

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我正在尝试运行以下命令rabbitmq-plugins.bat enable rabbitmq_management  它给了我一个类似这样的错误： 11:36:55.464错误，无法创建cookie文件'h:/.erlang.cookie'：enoent我使用的是Windows7、Erlang版R16B01和Rabb...

问无法在Windows中创建Cookie文件RabbitMQ
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问无法在Windows中创建Cookie文件RabbitMQEN