blocks|key|4632251|text|我将代理设置为|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4632252|npm+config+set+http_proxy=http://domain:8080|code-block|syntax|javascript|4632253|而不是使用正确的方法|4632254|npm+config+set+proxy+http://domain:8080|4632255|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I was setting proxy as 

<pre><code>npm config set http_proxy=http://domain:8080
</code></pre>

instead of using the correct way 

<pre><code>npm config set proxy http://domain:8080
</code></pre>

blocks|key|4632282|text|不是使用npm+config+set+http_proxy=http://address:8080设置代理，而是转到~/.npmrc并删除代理配置。这解决了我的问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4632283|entityMap^0|4|19|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

Instead of setting the proxy using<code>npm config set http_proxy=http://address:8080</code> go to ~/.npmrc and remove the proxy config. This resolved my issue.

blocks|key|4632293|text|首先，我使用以下命令检查是否为我设置了代理：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4632294|npm+config+get+proxy|code-block|syntax|javascript|4632295|它返回null，然后我运行以下命令|4632296|npm+config+set+strict-ssl=false|4632297|它会为cmd会话禁用strict-ssl。|4632298|您可以使用以下命令查看完整的配置列表|4632299|npm+config+list+ls+-l|4632300|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|X|8|@]|9|@]|A|$]]|$1|O|3|P|5|D|7|Y|8|@]|9|@]|A|$E|F]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

First I check whether proxy is set for me or not using this : 

<pre><code>npm config get proxy
</code></pre>

It returned null then I run this command 

<pre><code>npm config set strict-ssl=false
</code></pre>

It disable strict-ssl for that cmd session.

You can see complete list of config using this 

<pre><code>npm config list ls -l
</code></pre>

blocks|key|4632325|text|步骤1:设置代理npm设置代理http://username:password@companyProxy:8080|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4632326|npm设置https-proxy+http://username:password@companyProxy:8080|4632327|npm配置设置严格-ssl+false+-g|4632328|注:除@+allowed外，密码中没有特殊字符。|4632329|entityMap|0|LINK|mutability|MUTABLE|url|http://username:password@companyproxy:8080/|1^0|F|16|0|0|H|16|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@$A|T|B|U|1|V]]|C|$]]|$1|D|3|E|5|6|7|W|8|@]|9|@$A|X|B|Y|1|Z]]|C|$]]|$1|F|3|G|5|6|7|10|8|@]|9|@]|C|$]]|$1|H|3|I|5|6|7|11|8|@]|9|@]|C|$]]|$1|J|3|-4|5|6|7|12|8|@]|9|@]|C|$]]]|K|$L|$5|M|N|O|C|$P|Q]]|R|$5|M|N|O|C|$P|Q]]]]

Step 1: Set the proxy
npm set proxy <a href="http://username:password@companyProxy:8080" rel="nofollow noreferrer">http://username:password@companyProxy:8080</a>

npm set https-proxy <a href="http://username:password@companyProxy:8080" rel="nofollow noreferrer">http://username:password@companyProxy:8080</a>

npm config set strict-ssl false -g 

NOTES: No special characters in password except @ allowed.

blocks|key|4632358|text|我得到了完全相同的错误，这就是我所做的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4632359|npm+config+get+proxy|code-block|syntax|javascript|4632360|并且它返回"null“|4632361|在记事本中打开"C:\Users\Myname.npmrc“并进行了一些更改。这就是我的.npmrc文件现在的样子|4632362|http-proxy=http://proxyhost/:proxyport
strict-ssl=false
registry=http://registry.npmjs.org/|4632363|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|S|8|@]|9|@]|A|$E|F]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

I got the exact same error and this is what i did. 

<pre><code>npm config get proxy
</code></pre>

and it returned "null"

Opened "C:\Users\Myname.npmrc" in a notepad and made some changes. This is how my .npmrc file looks now

<pre><code>http-proxy=http://proxyhost/:proxyport
strict-ssl=false
registry=http://registry.npmjs.org/
</code></pre>

blocks|key|126292|text|由于某些原因，我的错误一直指向配置文件中的"proxy“属性。这是误导性的。在我的故障排除期间，我尝试为proxy和https-proxy属性设置不同的值，但只会得到错误消息，说明要确保正确设置代理配置，并指向较旧的值。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126293|使用，NPM+CONFIG+LS+-L命令可列出配置文件中的所有属性和值。然后，我能够看到有问题的值与https-proxy匹配，因此使用https-proxy。因此，我更改了代理(我的公司使用不同的代理)，然后它就起作用了。我想我应该加上这一点，就像这些微妙的令人困惑的错误一样，关于它的每个观点都有帮助。|126294|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

for some reason my error kept pointing to the "proxy" property in the config file. Which was misleading. During my troubleshooting I was trying different values for the proxy and https-proxy properties, but would only get the error stating to make sure the proxy config was set properly, and pointing to an older value. 

Using, NPM CONFIG LS -L command lists all the properties and values in the config file. I was then able to see the value in question was matching the https-proxy, therefore using the https-proxy. So I changed the proxy (my company uses different ones) and then it worked. figured I would add this, as with these subtle confusing errors, every perspective on it helps.

blocks|key|126303|text|只需使用以下命令取消设置代理主机：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126304|unset+HOST|offset|length|style|CODE|126305|这对我很有效。|126306|entityMap^0|0|0|A|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

Just unset the proxy host using :

<code>unset HOST</code>

This worked for me.

blocks|key|126338|text|使用npm安装包时，请确保使用最新的npm版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126339|在安装JavaScript时，请提及最新版本的NodeJS。例如，使用devtools安装JavaScript时，请使用以下代码：|126340|devtools+i+--javascript+nodejs:10.15.1|code-block|syntax|javascript|126341|这将下载并安装提到的NodeJS版本。请在更新版本后尝试使用npm安装包。这对我很有效。|126342|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

Make sure to use the latest npm version while installing packages using npm.

While installing JavaScript, mention the latest version of NodeJS. For example, while installing JavaScript using devtools, use the below code:

<pre><code>devtools i --javascript nodejs:10.15.1
</code></pre>

This will download and install the mentioned NodeJS version. Try installing the packages with npm after updating the version. This worked for me.

blocks|key|4632493|text|看一下您的HTTP_PROXY和HTTPS_PROXY环境变量。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4632494|我以为我的设置是正确的，设置为http://username:password@proxyhost:proxyport，但事实证明是他们造成了问题！在删除这些变量并重新启动commant提示符之后，npm命令再次工作。|4632495|entityMap^0|5|A|G|B|0|F|18|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

Take a look at your <code>HTTP_PROXY</code> and <code>HTTPS_PROXY</code> environment variables.

I thought mine were set correctly, as <code>http://username:password@proxyhost:proxyport</code>, but it turned out that they were actually causing the problem! After deleting those variables, and restarting the commant prompt, the npm commands worked again.

blocks|key|126413|text|我在我的Arch+Linux发行版npm+14.3.0+(w/+npm+6.14.5)中遇到了这个问题。我简单地删除了~/.npm目录，并再次尝试，这次成功了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126414|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had this issue in my Arch Linux distro with npm 14.3.0 (w/ npm 6.14.5). I simply deleted the ~/.npm directory and tried again and this time it worked.

blocks|key|126442|text|对于我来说，从帮助文件夹中删除~/Users/.npmrc。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126443|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For me removing the ~/Users/.npmrc from the folder helped.

I am getting <code>npm ERR! network getaddrinfo ENOTFOUND</code> error while trying to install any package using NPM. I know there are numerous threads on the same issue but I could not find any thread which can help me. 

I have set the proxy &amp; I think its something to do with proxy not being set correctly\not using the correct url. 

<pre><code>npm config set proxy http://proxy.company.com:8080
npm config set https-proxy http://proxy.company.com:8080
</code></pre>

Is there any way to check the URL I am using while setting proxy is correct? Are there any steps I need to take in order rectify this issue?

<img src="https://i.stack.imgur.com/CKKnI.png" alt="enter image description here">

npm ERR! network getaddrinfo ENOTFOUND

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

当我尝试使用NPM安装任何软件包时，我得到了npm ERR! network getaddrinfo ENOTFOUND错误。我知道有许多关于同一问题的帖子，但我找不到任何可以帮助我的帖子。我已经设置了代理&我认为这与代理没有正确设置\没有使用正确的url有关。npm config set proxy http://p...

问npm错误！网络getaddrinfo ENOTFOUND
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问npm错误！网络getaddrinfo ENOTFOUNDEN