blocks|key|3089078|text|65535是UCS-2：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3089079|3089080|+Thus+code+point+U%2B0000+is+encoded+as+the+number+0,+and+U%2BFFFF+is+encoded+as+65535+(which+is+FFFF16+in+hexadecimal).|blockquote|offset|length|3089081|3089082|entityMap|0|LINK|mutability|MUTABLE|url|http://en.wikipedia.org/wiki/UTF-16/UCS-2^0|0|0|1|37|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|R|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|S|8|@]|9|@$F|T|G|U|1|V]]|A|$]]|$1|H|3|-4|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|J|$K|$5|L|M|N|A|$O|P]]]]

65535 is UCS-2:

<blockquote>
 <a href="http://en.wikipedia.org/wiki/UTF-16/UCS-2" rel="nofollow noreferrer">Thus code point U+0000 is encoded as the number 0, and U+FFFF is encoded as 65535 (which is FFFF16 in hexadecimal).</a>
</blockquote>

blocks|key|3089096|text|对于UCS-2为0xFFFF+(或65535)，对于UCS-4为0x10FFFF+(或1114111)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3089097|Py_UNICODE
PyUnicode_GetMax(void)
{
#ifdef+Py_UNICODE_WIDE
++++return+0x10FFFF;
#else
++++/*+This+is+actually+an+illegal+character,+so+it+should
+++++++not+be+passed+to+unichr.+*/
++++return+0xFFFF;
#endif
}|code-block|syntax|javascript|3089098|UCS-4模式中的最大字符数由UTF-16中可表示的最大值定义。|3089099|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

It's 0xFFFF (or 65535) for UCS-2, and 0x10FFFF (or 1114111) for UCS-4:

<pre><code>Py_UNICODE
PyUnicode_GetMax(void)
{
#ifdef Py_UNICODE_WIDE
 return 0x10FFFF;
#else
 /* This is actually an illegal character, so it should
 not be passed to unichr. */
 return 0xFFFF;
#endif
}
</code></pre>

The maximum character in UCS-4 mode is defined by the maxmimum value representable in UTF-16.

blocks|key|3089107|text|当使用--enable-unicode=ucs4构建时：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3089108|>>>+import+sys
>>>+print+sys.maxunicode
1114111|code-block|syntax|javascript|3089109|当使用--enable-unicode=ucs2构建时：|3089110|>>>+import+sys
>>>+print+sys.maxunicode
65535|3089111|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

When built with --enable-unicode=ucs4:

<pre><code>&gt;&gt;&gt; import sys
&gt;&gt;&gt; print sys.maxunicode
1114111
</code></pre>

When built with --enable-unicode=ucs2:

<pre><code>&gt;&gt;&gt; import sys
&gt;&gt;&gt; print sys.maxunicode
65535
</code></pre>

blocks|key|328380|text|我曾经遇到过同样的问题。我在我的wiki上记录了它，地址是|type|unstyled|depth|inlineStyleRanges|entityRanges|data|328381|http://arcoleo.org/dsawiki/Wiki.jsp?page=Python%2520UTF%2520-%2520UCS2%2520or%2520UCS4|offset|length|328382|我写了-|328383|import+sys
sys.maxunicode+>+65536+and+'UCS4'+or+'UCS2'|code-block|syntax|javascript|328384|entityMap|0|LINK|mutability|MUTABLE|url|http://arcoleo.org/dsawiki/Wiki.jsp?page=Python%2520UTF%2520-%2520UCS2%2520or%2520UCS4^0|0|0|24|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@$D|W|E|X|1|Y]]|A|$]]|$1|F|3|G|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|10|8|@]|9|@]|A|$K|L]]|$1|M|3|-4|5|6|7|11|8|@]|9|@]|A|$]]]|N|$O|$5|P|Q|R|A|$S|T]]]]

I had this same issue once. I documented it for myself on my wiki at

<a href="http://arcoleo.org/dsawiki/Wiki.jsp?page=Python%20UTF%20-%20UCS2%20or%20UCS4" rel="noreferrer">http://arcoleo.org/dsawiki/Wiki.jsp?page=Python%20UTF%20-%20UCS2%20or%20UCS4</a>

I wrote -

<pre><code>import sys
sys.maxunicode &gt; 65536 and 'UCS4' or 'UCS2'
</code></pre>

blocks|key|328386|text|sysconfig将从python的配置变量中获知unicode大小。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|328387|构建标志可以像这样查询。|328388|Python2.7：|style|BOLD|328389|import+sysconfig
sysconfig.get_config_var('Py_UNICODE_SIZE')|code-block|syntax|javascript|328390|Python2.6：|328391|import+distutils
distutils.sysconfig.get_config_var('Py_UNICODE_SIZE')|328392|entityMap|0|LINK|mutability|MUTABLE|url|https://docs.python.org/2.7/library/sysconfig.html^0|0|9|0|0|0|0|A|0|0|0|A|0|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@$A|11|B|12|1|13]]|C|$]]|$1|D|3|E|5|6|7|14|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|15|8|@$A|16|B|17|H|I]]|9|@]|C|$]]|$1|J|3|K|5|L|7|18|8|@]|9|@]|C|$M|N]]|$1|O|3|P|5|6|7|19|8|@$A|1A|B|1B|H|I]]|9|@]|C|$]]|$1|Q|3|R|5|L|7|1C|8|@]|9|@]|C|$M|N]]|$1|S|3|-4|5|6|7|1D|8|@]|9|@]|C|$]]]|T|$U|$5|V|W|X|C|$Y|Z]]]]

<a href="https://docs.python.org/2.7/library/sysconfig.html" rel="noreferrer">sysconfig</a> will tell the unicode size from the configuration variables of python.

The buildflags can be queried like this.

Python 2.7:

<pre><code>import sysconfig
sysconfig.get_config_var('Py_UNICODE_SIZE')
</code></pre>

Python 2.6:

<pre><code>import distutils
distutils.sysconfig.get_config_var('Py_UNICODE_SIZE')
</code></pre>

blocks|key|3089194|text|我遇到了同样的问题，并找到了一段半官方的代码，它完全可以做到这一点，而且对于有同样问题的人来说可能会很有趣：https://bitbucket.org/pypa/wheel/src/cf4e2d98ecb1f168c50a6de496959b4a10c6b122/wheel/pep425tags.py?at=default&fileviewer=file-view-default#pep425tags.py-83:89。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3089195|它来自will项目，该项目需要检查python是使用ucs-2还是ucs-4编译的，因为它将更改生成的二进制文件的名称。|3089196|entityMap|0|LINK|mutability|MUTABLE|url|https://bitbucket.org/pypa/wheel/src/cf4e2d98ecb1f168c50a6de496959b4a10c6b122/wheel/pep425tags.py?at=default&fileviewer=file-view-default#pep425tags.py-83:89^0|1I|4D|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

I had the same issue and found a semi-official piece of code that does exactly that and may be interesting for people with the same issue: <a href="https://bitbucket.org/pypa/wheel/src/cf4e2d98ecb1f168c50a6de496959b4a10c6b122/wheel/pep425tags.py?at=default&amp;fileviewer=file-view-default#pep425tags.py-83:89" rel="nofollow">https://bitbucket.org/pypa/wheel/src/cf4e2d98ecb1f168c50a6de496959b4a10c6b122/wheel/pep425tags.py?at=default&amp;fileviewer=file-view-default#pep425tags.py-83:89</a>.

It comes from the wheel project which needs to check if the python is compiled with ucs-2 or ucs-4 because it will change the name of the binary file generated.

blocks|key|3302243|text|另一种方法是创建一个Unicode数组并查看itemsize：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3302244|import+array
bytes_per_char+=+array.array('u').itemsize|code-block|syntax|javascript|3302245|引用自array+docs|offset|length|style|CODE|3302246|3302247|类型代码对应于'u'的unicode字符。在狭窄的Unicode构建上，这是2字节，在宽构建上，这是4字节。|blockquote|3302248|3302249|3302250|请注意，从Python3.3开始，窄Unicode构建和宽Unicode构建之间的区别就消失了，请参阅PEP393。array的'u'类型代码从3.3开始就被弃用，并计划在Python4.0中删除。|3302251|entityMap|0|LINK|mutability|MUTABLE|url|https://docs.python.org/2/library/array.html|1|https://www.python.org/dev/peps/pep-0393/^0|0|0|3|5|3|A|0|0|0|7|3|0|0|0|1M|5|1S|3|1F|6|1|0^^$0|@$1|2|3|4|5|6|7|14|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|15|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|16|8|@$I|17|J|18|K|L]]|9|@$I|19|J|1A|1|1B]]|A|$]]|$1|M|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]|$1|N|3|O|5|P|7|1D|8|@$I|1E|J|1F|K|L]]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|1G|8|@]|9|@]|A|$]]|$1|R|3|-4|5|6|7|1H|8|@]|9|@]|A|$]]|$1|S|3|T|5|6|7|1I|8|@$I|1J|J|1K|K|L]|$I|1L|J|1M|K|L]]|9|@$I|1N|J|1O|1|1P]]|A|$]]|$1|U|3|-4|5|6|7|1Q|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|11]]|12|$5|X|Y|Z|A|$10|13]]]]

Another way is to create an Unicode array and look at the itemsize:

<pre><code>import array
bytes_per_char = array.array('u').itemsize
</code></pre>

Quote from the <a href="https://docs.python.org/2/library/array.html" rel="nofollow"><code>array</code> docs</a>:

<blockquote>
 The <code>'u'</code> typecode corresponds to Python’s unicode character. On narrow Unicode builds this is 2-bytes, on wide builds this is 4-bytes.
</blockquote>

Note that the distinction between narrow and wide Unicode builds is dropped from Python 3.3 onward, see <a href="https://www.python.org/dev/peps/pep-0393/" rel="nofollow">PEP393</a>. The <code>'u'</code> typecode for <code>array</code> is deprecated since 3.3 and scheduled for removal in Python 4.0.

Just what the title says.

<pre><code>$ ./configure --help | grep -i ucs
 --enable-unicode[=ucs[24]]
</code></pre>

Searching the official documentation, I found this:

<blockquote>
 <a href="http://docs.python.org/3.1/library/sys.html#sys.maxunicode" rel="noreferrer">sys.maxunicode</a>: An integer giving the
 largest supported code point for a
 Unicode character. The value of this
 depends on the configuration option
 that specifies whether Unicode
 characters are stored as UCS-2 or
 UCS-4.
</blockquote>

What is not clear here is - which value(s) correspond to UCS-2 and UCS-4.

The code is expected to work on Python 2.6+.

How to find out if Python is compiled with UCS-2 or UCS-4?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

就像标题所说的那样。$ ./configure --help | grep -i ucs  --enable-unicode[=ucs[24]]搜索官方文档，我发现了以下内容：Unicode ：一个整数，给出了字符支持的最大码位。其Unicode值取决于指定将字符存储为UCS-2还是UCS-4的配置选项。这里不清楚的是...

问如何确定Python是使用UCS-2还是UCS-4编译的？
EN

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何确定Python是使用UCS-2还是UCS-4编译的？EN

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何确定Python是使用UCS-2还是UCS-4编译的？
EN