blocks|key|2717448|text|在local.properties文件中签出|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2717449|sdk.dir=C\:\\Users\\USERNAME\\AppData\\Local\\Android\\sdk|code-block|syntax|javascript|2717450|正确编写此格式，并使用for+path检查/+slas|2717451|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

Check out in your local.properties file 

<pre><code>sdk.dir=C\:\\Users\\USERNAME\\AppData\\Local\\Android\\sdk
</code></pre>

properly write this format, and also check / slas using for path

blocks|key|2717463|text|该项目可能缺少settings.gradle文件。确保您要导入的项目中存在该文件。如果没有，请添加包含以下内容的settings.gradle文件：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2717464|include+':app'|code-block|syntax|javascript|2717465|保存该文件并将其放在项目的顶层文件夹中。|2717466|entityMap^0|7|F|1K|F|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]|$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|T|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|D|@]|E|$]]|$1|M|3|-4|5|6|7|V|8|@]|D|@]|E|$]]]|N|$]]

The project might be missing a <code>settings.gradle</code> file. Make sure that file exists from the project you are importing. If not add the <code>settings.gradle</code> file with the following : 

<pre><code>include ':app'
</code></pre>

Save the file and put it at the top level folder in your project.

blocks|key|2930263|text|在Linux中：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2930264|如果你已经下载了android+SDK，但是找不到。|2930265|2930266|对于使用gradle的react原生项目，我需要将local.properties文件放到Myprojectname/android/文件夹中。|offset|length|style|CODE|2930267|因为我已经将SDK解压到Downloads，所以我只在文件中使用该路径，行如下所示：|2930268|sdk.dir=/home/USER/Downloads/android-sdk-linux|code-block|syntax|javascript|2930269|entityMap^0|0|0|0|4|6|P|G|19|M|0|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|U|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|V|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|W|8|@$G|X|H|Y|I|J]|$G|Z|H|10|I|J]|$G|11|H|12|I|J]]|9|@]|A|$]]|$1|K|3|L|5|6|7|13|8|@]|9|@]|A|$]]|$1|M|3|N|5|O|7|14|8|@]|9|@]|A|$P|Q]]|$1|R|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|S|$]]

In Linux:

If you have already downloaded the android SDK but its not being found.

The problem might be that the file <code>local.properties</code> needs to be inside the same directory as <code>gradle</code> stuff for <code>gradle</code> to find it when building and running adb. 

For my react-native project using <code>gradle</code> I needed to put the <code>local.properties</code> file to <code>Myprojectname/android/</code> folder.

As I had unzipped the SDK to Downloads so I just use that path in the file with a row like this:

<pre><code>sdk.dir=/home/USER/Downloads/android-sdk-linux
</code></pre>

blocks|key|2717686|text|如果您正在尝试运行Google+android示例代码，请尝试导入整个存储库，而不是单个示例。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2717687|这是Google+Calendar+API+sample+code附带的instructions.html。|2717688|2717689|blockquote|2717690|2717691|2717692|导入日历-android-示例项目|unordered-list-item|2717693|选择“导入项目...”或者文件>导入Project...|2717694|Select+someDirectory/google-api-java-client-samples/build.gradle，然后单击确定。如果您尝试导入someDirectory/google-api-java-client-samples/calendar-android-sample/build.gradle|2717695|，|2717696|Note:它将不起作用|2717697|2717698|2717699|使用目录/+gradle+-2.2.1的"Gradle+home“选择”使用本地gradle分发版“，然后单击”确定“。|2717700|2717701|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/google/google-api-java-client-samples/tree/master/calendar-android-sample|1|https://github.com/google/google-api-java-client-samples/blob/master/calendar-android-sample/instructions.html#L117-L134^0|V|F|0|2|V|0|10|H|1|0|0|0|0|0|0|0|0|0|0|B|0|0|0|0|1O|0|0^^$0|@$1|2|3|4|5|6|7|1C|8|@$9|1D|A|1E|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|1F|8|@]|D|@$9|1G|A|1H|1|1I]|$9|1J|A|1K|1|1L]]|E|$]]|$1|H|3|-4|5|6|7|1M|8|@]|D|@]|E|$]]|$1|I|3|-4|5|J|7|1N|8|@]|D|@]|E|$]]|$1|K|3|-4|5|6|7|1O|8|@]|D|@]|E|$]]|$1|L|3|-4|5|6|7|1P|8|@]|D|@]|E|$]]|$1|M|3|N|5|O|7|1Q|8|@]|D|@]|E|$]]|$1|P|3|Q|5|O|7|1R|8|@]|D|@]|E|$]]|$1|R|3|S|5|O|7|1S|8|@]|D|@]|E|$]]|$1|T|3|U|5|6|7|1T|8|@]|D|@]|E|$]]|$1|V|3|W|5|O|7|1U|8|@$9|1V|A|1W|B|C]]|D|@]|E|$]]|$1|X|3|-4|5|6|7|1X|8|@]|D|@]|E|$]]|$1|Y|3|-4|5|6|7|1Y|8|@]|D|@]|E|$]]|$1|Z|3|10|5|O|7|1Z|8|@$9|20|A|21|B|C]]|D|@]|E|$]]|$1|11|3|-4|5|6|7|22|8|@]|D|@]|E|$]]|$1|12|3|-4|5|6|7|23|8|@]|D|@]|E|$]]]|13|$14|$5|15|16|17|E|$18|19]]|1A|$5|15|16|17|E|$18|1B]]]]

If you are trying to run Google android sample code, try to import the entire repository instead of an individual sample.
Here is <a href="https://github.com/google/google-api-java-client-samples/blob/master/calendar-android-sample/instructions.html#L117-L134" rel="nofollow noreferrer">instructions.html</a>, included with the <a href="https://github.com/google/google-api-java-client-samples/tree/master/calendar-android-sample" rel="nofollow noreferrer">Google Calendar API sample code</a>.
<blockquote>
<ul>
<li>Import calendar-android-sample project</li>
<li>Select &quot;Import Project...&quot; or File &gt; Import Project...</li>
<li>Select [someDirectory]/google-api-java-client-samples/build.gradle and
click OK.
<ul>
<li>Note: it will not work if you try to import [someDirectory]/google-api-java-client-samples/calendar-android-sample/build.gradle</li>
</ul>
</li>
<li>Select &quot;Use local gradle distribution&quot; with &quot;Gradle home&quot; of [someDirectory]/gradle-2.2.1 and click OK.</li>
</ul>
</blockquote>

blocks|key|2930383|text|我知道这个答案来得太晚了，但我希望它能帮助其他人。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2930384|答案很简单。您只需将您的local.properties文件复制到存储项目的文件夹中，它就会像charm一样工作。但请记住，它必须放置在存储项目的根文件夹中。|offset|length|style|CODE|2930385|entityMap^0|0|C|G|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

I know this answer is late, but I hope it helps others.

The answer is simple. You have to just copy your <code>local.properties</code> file to the folder where project is stored and it will work like charm. But remember, it must be placed in the root folder where the project is stored.

blocks|key|145064|text|只需删除.idea文件夹并再次导入项目即可。这对我很有效。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145065|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Just Remove .idea folder and import the project again. It's worked for me.

blocks|key|145067|text|检查，1、在模块设置中，SDK位置是否正确。2.如果是，检查local.properties文件(不是放在app模块内的文件，而是放在app模块外的父级文件)。如果不存在，则在其内部添加以下行。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145068|sdk.dir=/path/to/sdk/../Android/Sdk|code-block|syntax|javascript|145069|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Check, 
1. In Module settings, whether, SDK location is proper.
2. If Yes, check for local.properties file (Not the one placed inside app module, but the one placed outside the app module, at parent level). If not present add it with below lines inside it.

<pre><code>sdk.dir=/path/to/sdk/../Android/Sdk
</code></pre>

blocks|key|2717768|text|我通过在windows中创建ANDROID_HOME环境变量解决了这个问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2717769|ANDROID_HOME=C:\Users\<user_name>\AppData\Local\Android\sdk|code-block|syntax|javascript|2717770|重启安卓工作室它应该构建项目！|2717771|entityMap^0|E|C|0|0|0|2|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|R|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|S|8|@$9|T|A|U|B|C]]|D|@]|E|$]]|$1|M|3|-4|5|6|7|V|8|@]|D|@]|E|$]]]|N|$]]

I resolved this issue by creating ANDROID_HOME environment variable as follows in windows.

<pre><code>ANDROID_HOME=C:\Users\&lt;user_name&gt;\AppData\Local\Android\sdk
</code></pre>

Restart Android Studio it should build project!

blocks|key|2930437|text|造成这个错误的原因不是单一的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2930438|2930439|settings.gradle可能丢失，或者其中的内容可能是wrong.|ordered-list-item|offset|length|style|CODE|2930440|local.properties，或者sdk路径可能写入错误。|2930441|2930442|entityMap^0|0|0|0|F|0|0|G|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|Q|8|@$F|R|G|S|H|I]]|9|@]|A|$]]|$1|J|3|K|5|E|7|T|8|@$F|U|G|V|H|I]]|9|@]|A|$]]|$1|L|3|-4|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|N|$]]

There is not a single reason for this error.

<ol>
<li><code>settings.gradle</code> may be missing or the content in it may be wrong.</li>
<li><code>local.properties</code> may be missing or the sdk path may be wrongly written.</li>
</ol>

blocks|key|141473|text|请遵循以下几点，这对我很有效：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|141474|打开你的Project+->+Android|offset|length|style|CODE|141475|Create+a+local.properties|unordered-list-item|141476|
|141477|Open+|141478|ordered-list-item|141479|，根据操作系统粘贴你的Android+SDK路径：|141480|141481|141482|4.窗口|141483|sdk.dir+=+C:/Users/USERNAME/AppData/Local/Android/sdk|141484|4.bLinux或MacOS|141485|sdk.dir+=+/home/USERNAME/Android/sdk|141486|将USERNAME替换为您的用户名|141487|entityMap^0|0|4|I|0|9|G|0|0|0|0|0|0|0|0|0|1H|0|0|0|10|0|1|8|0^^$0|@$1|2|3|4|5|6|7|16|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|17|8|@$D|18|E|19|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|1A|8|@$D|1B|E|1C|F|G]]|9|@]|A|$]]|$1|K|3|L|5|6|7|1D|8|@]|9|@]|A|$]]|$1|M|3|N|5|J|7|1E|8|@]|9|@]|A|$]]|$1|O|3|-4|5|P|7|1F|8|@]|9|@]|A|$]]|$1|Q|3|R|5|P|7|1G|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|1H|8|@]|9|@]|A|$]]|$1|T|3|-4|5|6|7|1I|8|@]|9|@]|A|$]]|$1|U|3|V|5|6|7|1J|8|@]|9|@]|A|$]]|$1|W|3|X|5|6|7|1K|8|@$D|1L|E|1M|F|G]]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|1N|8|@]|9|@]|A|$]]|$1|10|3|11|5|6|7|1O|8|@$D|1P|E|1Q|F|G]]|9|@]|A|$]]|$1|12|3|13|5|6|7|1R|8|@$D|1S|E|1T|F|G]]|9|@]|A|$]]|$1|14|3|-4|5|6|7|1U|8|@]|9|@]|A|$]]]|15|$]]

Please follow bellow points it work's for me:

<ol>
<li>Go to your <code>Project -&gt; Android</code></li>
<li>Create a file <code>local.properties</code></li>
<li>Open the file</li>
<li>Paste your Android SDK path depending on the operating system:

4.a Windows

<code>sdk.dir = C:/Users/USERNAME/AppData/Local/Android/sdk</code>

4.b Linux or MacOS

<code>sdk.dir = /home/USERNAME/Android/sdk</code>

Replace <code>USERNAME</code> with your user name</li>
</ol>

blocks|key|2717920|text|为我找到了有效的解决方案。不需要添加local.properties和设置ANDROID_HOME变量。看起来像是Android+Studio和Intellij+IDEA中的bug。你只需要让IDE“重置”到Android+SDK的路径即可。'SDK+Location+not+found'+in+Android+Studio+despite+having+the+environment+variable+set+correctly|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2717921|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/40298653/sdk-location-not-found-in-android-studio-despite-having-the-environment-variab/45479895#45479895^0|3D|2O|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

Found working solution for me. Without adding local.properties and set up ANDROID_HOME variable. Seems like a bug in Android Studio and Intellij IDEA.
You just need to ask IDE to "reset" path to Android SDK.
<a href="https://stackoverflow.com/questions/40298653/sdk-location-not-found-in-android-studio-despite-having-the-environment-variab/45479895#45479895">&#39;SDK Location not found&#39; in Android Studio despite having the environment variable set correctly</a>

blocks|key|2717946|text|当您单击“运行应用程序”(绿色箭头)并在编辑配置对话框中获得以下内容时，以下是解决此问题的方法：|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2717947|2717948|错误:请选择Android+SDK|blockquote|2717949|2717950|2717951|在Android+Studio中，执行以下操作：|2717952|2717953|从菜单中选择File+>+Settings。在设置对话框中，转到顶部的Appearance+&+Behavior+>+System+Settings+>+Android+SDK.|ordered-list-item|CODE|2717954|Look+|2717955|Android+SDK+Location，然后单击Edit按钮，然后单击Next，Next，Finish接受默认的|2717956|这似乎将SDK位置保存到某个内部位置，即使没有任何更改。我检查了.idea和.gradle文件夹，但没有看到Studio做了什么来更改配置文件--但现在我可以运行这个应用程序了。|2717957|总结之前的修复-这些修复对于没有构建问题的repo通常是可以的：|2717958|2717959|2717960|2717961|2717962|local.properties文件由工作室复制到根文件夹中。local.properties文件中的路径具有指向android+SDK的正确路径-在我的示例中为sdk.dir=C:\\android\\sdk+(请注意，此路径具有不同的格式-工作室应根据存储库中存在的Android+SDK设置中的文本输入字段为您编写此文件-并引用应用程序文件夹(通常为：|unordered-list-item|2717963|)|2717964|2717965|2717966|entityMap^0|K|4|0|0|0|0|0|0|0|6|F|Z|1H|0|0|0|K|P|4|0|W|5|12|7|0|0|0|0|0|0|0|G|V|G|29|O|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1D|8|@$9|1E|A|1F|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|1G|8|@]|D|@]|E|$]]|$1|G|3|H|5|I|7|1H|8|@]|D|@]|E|$]]|$1|J|3|-4|5|6|7|1I|8|@]|D|@]|E|$]]|$1|K|3|-4|5|6|7|1J|8|@]|D|@]|E|$]]|$1|L|3|M|5|6|7|1K|8|@]|D|@]|E|$]]|$1|N|3|-4|5|6|7|1L|8|@]|D|@]|E|$]]|$1|O|3|P|5|Q|7|1M|8|@$9|1N|A|1O|B|R]|$9|1P|A|1Q|B|R]]|D|@]|E|$]]|$1|S|3|T|5|Q|7|1R|8|@]|D|@]|E|$]]|$1|U|3|V|5|6|7|1S|8|@$9|1T|A|1U|B|C]|$9|1V|A|1W|B|R]]|D|@]|E|$]]|$1|W|3|X|5|6|7|1X|8|@$9|1Y|A|1Z|B|R]|$9|20|A|21|B|R]]|D|@]|E|$]]|$1|Y|3|Z|5|6|7|22|8|@]|D|@]|E|$]]|$1|10|3|-4|5|6|7|23|8|@]|D|@]|E|$]]|$1|11|3|-4|5|I|7|24|8|@]|D|@]|E|$]]|$1|12|3|-4|5|6|7|25|8|@]|D|@]|E|$]]|$1|13|3|-4|5|6|7|26|8|@]|D|@]|E|$]]|$1|14|3|15|5|16|7|27|8|@$9|28|A|29|B|C]|$9|2A|A|2B|B|C]|$9|2C|A|2D|B|R]]|D|@]|E|$]]|$1|17|3|18|5|6|7|2E|8|@]|D|@]|E|$]]|$1|19|3|-4|5|16|7|2F|8|@]|D|@]|E|$]]|$1|1A|3|-4|5|6|7|2G|8|@]|D|@]|E|$]]|$1|1B|3|-4|5|6|7|2H|8|@]|D|@]|E|$]]]|1C|$]]

Here is a work around for the problem when you click "Run App" (green arrow) and get the following in the Edit Configuration dialog: 

<blockquote>
 Error: Please select Android SDK
</blockquote>

In Android Studio, do:

<ol>
<li>From the menu, choose <code>File &gt; Settings</code>. </li>
<li>In the settings dialog, go to <code>Appearance &amp; Behavior &gt; System Settings &gt; Android SDK</code>.</li>
<li>Look at the top for Android SDK Location, and click the <code>Edit</code> button</li>
<li>Hit Next, Next, Finish to accept the defaults</li>
</ol>

This seems to save away the SDK location - even though nothing has changed - into some internal location. I inspected the <code>.idea</code> and <code>.gradle</code> folders but didn't see what Studio did to change a config file - but now I can run the app.

And to summarize the previous fixes - these are normally OK for a repo without build problems:

<blockquote>
 <ul>
 <li>local.properties file is copied into the root folder by Studio.</li>
 <li>The path in the local.properties file has the correct path to the android SDK - in my case it is <code>sdk.dir=C:\\android\\sdk</code>
 (note that this path has a different format - Studio should write this file for you based on the Text Entry field in the Android SDK Settings dialog)</li>
 <li>settings.gradle file is present in the repo - and references the application folder (typically :app)</li>
 </ul>
</blockquote>

blocks|key|2717997|text|在项目的根目录中创建包含以下内容的local.properties文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2717998|##+This+file+is+automatically+generated+by+Android+Studio.
#+Do+not+modify+this+file+--+YOUR+CHANGES+WILL+BE+ERASED!
#
#+This+file+must+*NOT*+be+checked+into+Version+Control+Systems,
#+as+it+contains+information+specific+to+your+local+configuration.
#
#+Location+of+the+SDK.+This+is+only+used+by+Gradle.
#+For+customization+when+using+a+Version+Control+System,+please+read+the
#+header+note.
#Tue+Oct+24+17:40:53+CEST+2017

sdk.dir=/Users/****/Library/Android/sdk|code-block|syntax|javascript|2717999|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

create a local.properties file in your root directory of your project with the following content

<pre><code>## This file is automatically generated by Android Studio.
# Do not modify this file -- YOUR CHANGES WILL BE ERASED!
#
# This file must *NOT* be checked into Version Control Systems,
# as it contains information specific to your local configuration.
#
# Location of the SDK. This is only used by Gradle.
# For customization when using a Version Control System, please read the
# header note.
#Tue Oct 24 17:40:53 CEST 2017

sdk.dir=/Users/****/Library/Android/sdk
</code></pre>

blocks|key|2930597|text|当您尝试从../app/build.gradle文件导入Android+Studio项目时，会遇到此问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2930598|通过选择位于项目根目录中的../build.gradle文件来导入项目。|2930599|entityMap^0|5|J|0|D|F|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|P|8|@]|D|@]|E|$]]]|I|$]]

This problem is encountered when you try to import an Android Studio project from the ../app/build.gradle file.

Import the project by selecting the ../build.gradle file located in the root directory of your project.

blocks|key|145170|text|请按照以下步骤操作，这对我来说是有效的：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145171|145172|转到您的react本地项目，然后转到android目录，使用以下名称创建一个文件：|unordered-list-item|145173|145174|145175|+local.properties|blockquote|145176|145177|145178|145179|打开文件并粘贴您的Android+SDK路径，如下所示：|145180|145181|windows用户的：|offset|length|style|BOLD|145182|sdk.dir=C:\\Users\\UserName\\AppData\\Local\\Android\\sdk|code-block|syntax|javascript|145183|将UserName替换为您的pc用户名。还要确保文件夹是Sdk或sdk。在我的例子中，我的计算机用户名是Zahid，因此路径如下：|145184|sdk.dir=C:\\Users\\Zahid\\AppData\\Local\\Android\\sdk|145185|Mac用户的：|145186|sdk.dir+=+/Users/USERNAME/Library/Android/sdk|145187|其中，用户名是您的OSX用户名。|145188|适用于Linux+(Ubuntu)用户的：|145189|sdk.dir+=+/home/USERNAME/Android/Sdk|145190|其中USERNAME是您的linux用户名(Linux路径区分大小写:确保Sdk中S的大小写匹配)|CODE|145191|如果这不起作用，在“环境变量”中添加ANDROID_HOME变量作为C:\Users\USER\AppData\Local\Android\Sdk|145192|​|145193|📷|atomic|145194|145195|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/dff00135187aaca9163f85c6d1677a98.png|imageAlt^0|0|0|0|0|0|0|0|0|0|0|0|A|1|0|0|0|0|6|1|0|0|0|K|1|0|0|11|3|15|1|0|Y|13|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|20|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|21|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|22|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|23|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|24|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|25|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|26|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|27|8|@]|9|@]|A|$]]|$1|N|3|O|5|E|7|28|8|@]|9|@]|A|$]]|$1|P|3|-4|5|6|7|29|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|2A|8|@$S|2B|T|2C|U|V]]|9|@]|A|$]]|$1|W|3|X|5|Y|7|2D|8|@]|9|@]|A|$Z|10]]|$1|11|3|12|5|6|7|2E|8|@]|9|@]|A|$]]|$1|13|3|14|5|Y|7|2F|8|@]|9|@]|A|$Z|10]]|$1|15|3|16|5|6|7|2G|8|@$S|2H|T|2I|U|V]]|9|@]|A|$]]|$1|17|3|18|5|Y|7|2J|8|@]|9|@]|A|$Z|10]]|$1|19|3|1A|5|6|7|2K|8|@]|9|@]|A|$]]|$1|1B|3|1C|5|6|7|2L|8|@$S|2M|T|2N|U|V]]|9|@]|A|$]]|$1|1D|3|1E|5|Y|7|2O|8|@]|9|@]|A|$Z|10]]|$1|1F|3|1G|5|6|7|2P|8|@$S|2Q|T|2R|U|1H]|$S|2S|T|2T|U|1H]]|9|@]|A|$]]|$1|1I|3|1J|5|6|7|2U|8|@$S|2V|T|2W|U|1H]]|9|@]|A|$]]|$1|1K|3|1L|5|6|7|2X|8|@]|9|@]|A|$]]|$1|1M|3|1N|5|1O|7|2Y|8|@]|9|@$S|2Z|T|30|1|31]]|A|$]]|$1|1P|3|1L|5|6|7|32|8|@]|9|@]|A|$]]|$1|1Q|3|-4|5|6|7|33|8|@]|9|@]|A|$]]]|1R|$1S|$5|1T|1U|1V|A|$1W|1X|1Y|-4]]]]

Please follow below steps it work's for me:

<ul>
<li>Go to your react-native Project then go to android directory
Create a file with following name:</li>
</ul>

<blockquote>
 local.properties
</blockquote>

<ul>
<li>Open the file and paste your Android SDK path like below:</li>
</ul>

For windows users:

<pre><code>sdk.dir=C:\\Users\\UserName\\AppData\\Local\\Android\\sdk
</code></pre>

Replace UserName with your pc user name . Also make sure the folder is sdk or Sdk. In my case my computer user name is Zahid so the path look like:

<pre><code>sdk.dir=C:\\Users\\Zahid\\AppData\\Local\\Android\\sdk
</code></pre>

For Mac users:

<pre><code>sdk.dir = /Users/USERNAME/Library/Android/sdk
</code></pre>

Where USERNAME is your OSX username.

For Linux (Ubuntu) users:

<pre><code>sdk.dir = /home/USERNAME/Android/Sdk
</code></pre>

Where USERNAME is your linux username(Linux paths are case-sensitive: make sure the case of <code>S</code> in <code>Sdk</code> matches)

In case if this doesn't work, add ANDROID_HOME variable in "Environment Variables" as <code>C:\Users\USER\AppData\Local\Android\Sdk</code>

<a href="https://i.stack.imgur.com/LDiPS.png" rel="noreferrer"><img src="https://i.stack.imgur.com/LDiPS.png" alt="enter image description here"></a>

blocks|key|2930712|text|当我从Github克隆我的存储库并运行./gradlew+clean+assembleDebug时，我刚刚遇到了这个问题。我确认我的.bashrc文件中有ANDROID_HOME。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2930713|因此，我将项目导入到Android+Studio中。注意到我的settings.gradle文件的扩展名是.kts，settings.gradle.kts。当我完成导入后，我运行./gradlew+clean+assembleDebug，没有得到任何问题。|2930714|entityMap^0|J|T|0|1H|4|1M|J|2H|T|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]|$9|P|A|Q|B|C]|$9|R|A|S|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|I|$]]

I just faced the issue when I cloned my repo from Github and ran <code>./gradlew clean assembleDebug</code>. I confirm I have ANDROID_HOME in my .bashrc file.

So, I imported the project into Android Studio. Noticed that extension of my settings.gradle file is <code>.kts</code>, <code>settings.gradle.kts</code>. When I am done with import then I ran <code>./gradlew clean assembleDebug</code> and didn't get any issue.

blocks|key|141566|text|最好也是最简单的方法是创建新的Android项目，将"app“文件夹从非工作项目移到新创建的项目中，并在新项目的gradle中添加所需的依赖项，一切都会完美地工作)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|141567|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

the best and the easiest way is to create new Android project move "app" folder from non working project to that newly made one and add the needed dependencies in the gradle of your new project and everything will work perfectly )

blocks|key|2930760|text|我试过了|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2930761|sdk.dir+=+\Users\OLUWAGBEMIGA\AppData\Local\Android\sdk+|code-block|syntax|javascript|2930762|它起作用了，我只是简单地将它粘贴到项目文件夹和外部。|2930763|在环境变量中，我还使用了上面的sdk链接和名称ANDROID_HOME作为路径名。关闭所有东西，重新打开，然后打开，一切正常|offset|length|style|CODE|2930764|entityMap^0|0|0|0|N|C|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|S|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|T|8|@$K|U|L|V|M|N]]|9|@]|A|$]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

I tried 

<pre><code>sdk.dir = \Users\OLUWAGBEMIGA\AppData\Local\Android\sdk 
</code></pre>

and it worked, I simply pasted it in the project folder and outside.

In the environment variable I also used the sdk link above and the name <code>ANDROID_HOME</code> as the path name. Close everything reopen and Cabom it all worked

blocks|key|2718197|text|我也找到了我的解决方案。我只是同步Gradle我有所有的文件夹(settings+.gradle,..)，但我接受这个错误..我只需要运行Sync+Project+With+Gradle+File和编辑SdkLocation，然后就可以了。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2718198|entityMap^0|W|J|1X|T|2T|B|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

I find My Solution too. I just Sync Gradle I have all folders (<code>settings .gradle,..</code>) but I take this error .. I just Run <code>Sync Project With Gradle File</code> and Edit<code>SdkLocation</code> And be ok ...

blocks|key|144024|text|将这两行放入.bashrc文件并运行source+~/.bashrc|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|144025|export+ANDROID_HOME=/Users/$USER/Library/Android/sdk+export+PATH=${PATH}:$ANDROID_HOME/tools:$ANDROID_HOME/platform-tools|144026|对于linux，我这样做了。(对于第一行)|144027|export+ANDROID_HOME=/home/$USER/Android/Sdk|code-block|syntax|javascript|144028|entityMap^0|I|G|0|0|3D|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|W|8|@]|D|@]|E|$]]|$1|J|3|K|5|L|7|X|8|@]|D|@]|E|$M|N]]|$1|O|3|-4|5|6|7|Y|8|@]|D|@]|E|$]]]|P|$]]

put these two lines in your .bashrc file and run <code>source ~/.bashrc</code>

<code>export ANDROID_HOME=/Users/$USER/Library/Android/sdk
export PATH=${PATH}:$ANDROID_HOME/tools:$ANDROID_HOME/platform-tools
</code>

For linux I did this.(For the first line)

<pre class="lang-sh prettyprint-override"><code>export ANDROID_HOME=/home/$USER/Android/Sdk
</code></pre>

blocks|key|2930808|text|我在刚刚克隆了一个存储库之后得到了这个错误。我希望local.properties能够自动生成，但事实并非如此，我能够通过重新导入Gradle项目来生成它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2930809|File+>+Re-import+Gradle+Project|code-block|syntax|javascript|2930810|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I got this error after freshly cloning a repository. I expected local.properties to be generated automatically, but it wasn't. I was able to generate it by re-importing the Gradle project.

<pre><code>File &gt; Re-import Gradle Project
</code></pre>

blocks|key|144050|text|如果所有其他方法都失败了，请将local.properties文件复制到项目目录的根目录。很简单。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|144051|entityMap^0|F|G|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

If all else fails, copy the <code>local.properties</code> file to the root of the project directory. Simply.

blocks|key|2718281|text|任何使用Jenkins的人，都可能得到它的帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2718282|您需要定义一个全局变量名ANDROID_HOME，其中包含android+sdk路径的值。|offset|length|style|CODE|2718283|对于mac，它是/Users/YOUR_USER_NAME/Library/Android/sdk。|2718284|entityMap^0|0|C|C|0|8|15|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@$D|Q|E|R|F|G]]|9|@]|A|$]]|$1|J|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|K|$]]

Anyone using Jenkins, might get it useful

You need to define a global variable name <code>ANDROID_HOME</code> with the value of the path to android sdk.

For mac, it is <code>/Users/YOUR_USER_NAME/Library/Android/sdk</code>

blocks|key|141642|text|如果在拉取react-native项目时遇到此问题，只需使用android+Studio打开Android项目即可。您需要的所有内容都将自动创建。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|141643|141644|打开Android+Studio|unordered-list-item|141645|文件->打开|141646|选择react本地项目文件夹下的android文件夹|offset|length|style|CODE|141647|等待AndroidStudio完成安装|141648|您现在可以关闭Android+Studio|141649|141650|或|141651|如果您已安装AndroidStudio+command+line+launcher|141652|141653|在您的react本地根文件夹|141654|中运行此命令|141655|studio+android/|code-block|syntax|javascript|141656|141657|141658|现在可以关闭Android+Studio|141659|141660|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/a/48266060/6155481^0|0|0|0|0|G|7|0|0|0|0|0|6|Z|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1J|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|1K|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|1L|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|1M|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|1N|8|@$J|1O|K|1P|L|M]]|9|@]|A|$]]|$1|N|3|O|5|E|7|1Q|8|@]|9|@]|A|$]]|$1|P|3|Q|5|E|7|1R|8|@]|9|@]|A|$]]|$1|R|3|-4|5|6|7|1S|8|@]|9|@]|A|$]]|$1|S|3|T|5|6|7|1T|8|@]|9|@]|A|$]]|$1|U|3|V|5|6|7|1U|8|@]|9|@$J|1V|K|1W|1|1X]]|A|$]]|$1|W|3|-4|5|6|7|1Y|8|@]|9|@]|A|$]]|$1|X|3|Y|5|E|7|1Z|8|@]|9|@]|A|$]]|$1|Z|3|10|5|6|7|20|8|@]|9|@]|A|$]]|$1|11|3|12|5|13|7|21|8|@]|9|@]|A|$14|15]]|$1|16|3|-4|5|6|7|22|8|@]|9|@]|A|$]]|$1|17|3|O|5|E|7|23|8|@]|9|@]|A|$]]|$1|18|3|19|5|E|7|24|8|@]|9|@]|A|$]]|$1|1A|3|-4|5|6|7|25|8|@]|9|@]|A|$]]|$1|1B|3|-4|5|6|7|26|8|@]|9|@]|A|$]]]|1C|$1D|$5|1E|1F|1G|A|$1H|1I]]]]

If you have this problem when you pull a react-native project, you just need to open the android project with Android Studio. Everything you need will be automatically created.

<ul>
<li>Open Android Studio</li>
<li>File -> Open</li>
<li>Choose the <code>android</code> folder under your react-native project folder</li>
<li>Wait for AndroidStudio to complete setup</li>
<li>You can now close Android Studio</li>
</ul>

OR

If you have installed the <a href="https://stackoverflow.com/a/48266060/6155481">AndroidStudio command line launcher</a>:

<ul>
<li>Run this in your react-native root folder</li>
</ul>

<pre><code>studio android/
</code></pre>

<ul>
<li>Wait for AndroidStudio to complete setup</li>
<li>You can now close Android Studio</li>
</ul>

blocks|key|2930964|text|适用于Mac/Linux用户的|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2930965|您需要在path中添加ANDROID_HOME，在.bashrc+%7C%7C+.zshrc+%7C%7C+.profile文件中添加以下内容|offset|length|style|CODE|2930966|#+change+$HOME+to+the+path+where+you+installed+android+Sdk
export+ANDROID_HOME=$HOME/Android/Sdk
export+PATH=$PATH:$ANDROID_HOME/tools|code-block|syntax|javascript|2930967|然后运行|2930968|$+source+~/.bashrc+%7C%7C+.zshrc+%7C%7C+.profile|2930969|Environment+variables+in+bash_profile+or+bashrc?+|2930970|Difference+between+.bashrc+and+.bash_profile|2930971|entityMap|0|LINK|mutability|MUTABLE|url|https://superuser.com/questions/409186/environment-variables-in-bash-profile-or-bashrc|1|https://superuser.com/questions/183870/difference-between-bashrc-and-bash-profile?answertab=active#tab-top^0|0|B|C|P|T|0|0|0|0|0|1D|0|0|0|18|1|0^^$0|@$1|2|3|4|5|6|7|14|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|15|8|@$D|16|E|17|F|G]|$D|18|E|19|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|1A|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|1B|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|1C|8|@]|9|@]|A|$K|L]]|$1|Q|3|R|5|6|7|1D|8|@]|9|@$D|1E|E|1F|1|1G]]|A|$]]|$1|S|3|T|5|6|7|1H|8|@]|9|@$D|1I|E|1J|1|1K]]|A|$]]|$1|U|3|-4|5|6|7|1L|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|11]]|12|$5|X|Y|Z|A|$10|13]]]]

For Mac/Linux users

You need to add <code>ANDROID_HOME</code> to your path, add the following to your <code>.bashrc || .zshrc || .profile</code> file

<pre><code># change $HOME to the path where you installed android Sdk
export ANDROID_HOME=$HOME/Android/Sdk
export PATH=$PATH:$ANDROID_HOME/tools
</code></pre>

Then run

<pre><code>$ source ~/.bashrc || .zshrc || .profile
</code></pre>

<a href="https://superuser.com/questions/409186/environment-variables-in-bash-profile-or-bashrc">Environment variables in bash_profile or bashrc?
</a>

<a href="https://superuser.com/questions/183870/difference-between-bashrc-and-bash-profile?answertab=active#tab-top">Difference between .bashrc and .bash_profile</a>

blocks|key|2931076|text|这个解决方案实际上对我很有效..转到此pc的用户名属性和高级系统设置和环境变量，然后在系统变量中创建新变量，名称为ANDROID_SDK_ROOT，值为username}\AppData\Local\Android\Sdk+->+C：\Users{USERNAME(替换为您的用户名|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2931077|如果真正的android手机使用usb调试，请确保已启用。(非常重要)|2931078|2931079|entityMap^0|1L|G|37|Q|0|0|Z|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@$9|L|A|M|B|C]|$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|P|8|@$9|Q|A|R|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|S|8|@]|D|@]|E|$]]|$1|I|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|J|$]]

This solution actually works for me..
go to this pc -> properties -> advanced system settings -> environment variables -> 
then in system variable create new variable with name ANDROID_SDK_ROOT and value C:\Users{USERNAME(Replace it with your username}\AppData\Local\Android\Sdk

and make sure that if real android mobile using usb debugging is enabled. (very important)

then close cmd and restart it should work.

blocks|key|2931104|text|在我的例子中，我不得不关闭Project并重新打开。它工作得很好。像这样|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931105|关闭项目|offset|length|style|BOLD|2931106|​|2931107|📷|atomic|2931108|2931109|再次打开项目，再次打开|2931110|2931111|2931112|2931113|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/9d1abf75133b532553b9a7d6629c20a5.png|imageAlt|1|https://ask.qcloudimg.com/http-save/yehe-900000/c7f6e547d5f3e3a5f504be0b45129c5b.png^0|0|0|4|0|0|0|1|0|0|0|0|0|0|1|1|0|0^^$0|@$1|2|3|4|5|6|7|13|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|14|8|@$D|15|E|16|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|17|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|18|8|@]|9|@$D|19|E|1A|1|1B]]|A|$]]|$1|M|3|I|5|6|7|1C|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|1D|8|@]|9|@]|A|$]]|$1|P|3|I|5|6|7|1E|8|@]|9|@]|A|$]]|$1|Q|3|K|5|L|7|1F|8|@]|9|@$D|1G|E|1H|1|1I]]|A|$]]|$1|R|3|I|5|6|7|1J|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|1K|8|@]|9|@]|A|$]]]|T|$U|$5|V|W|X|A|$Y|Z|10|-4]]|11|$5|V|W|X|A|$Y|12|10|-4]]]]

In my case, I had to close Project and open again. It worked fine. 
Like This

Close Project

<a href="https://i.stack.imgur.com/Brcpj.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/Brcpj.png" alt="enter image description here"></a>

And again Open Project Again

<a href="https://i.stack.imgur.com/8EDWX.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/8EDWX.png" alt="enter image description here"></a>

blocks|key|143129|text|我在想你的setting.gradle文件不见了。将此文件复制到另一个项目，然后粘贴您的project.It，我想会起作用的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|143130|在setting.gradle文件中，|143131|include+':app'|code-block|syntax|javascript|143132|这就是全部。祝你今天愉快。|143133|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

i was thinking your setting.gradle file is missing. Copy this file another project and paste your project.It will work i think.

in setting.gradle file ,

<pre><code>include ':app'
</code></pre>

thats all. Have a good day.

blocks|key|145485|text|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145486|转到React原生项目->+|ordered-list-item|145487|145488|创建文件local.properties的|145489|145490|145491|145492|打开文件|145493|145494|145495|粘贴您的Android+SDK路径，如下所示|145496|145497|在Windows中sdk.dir+=C：\Users\用户名\AppData\Local\Android\sdk在macOS中sdk.dir+=/Users/用户名/库/Android/sdk在linux中sdk.dir+=AppData|145498|145499|将用户名替换为您的用户名|145500|145501|145502|现在，在终端|145503|中运行react-native+run-android|offset|length|style|CODE|145504|或|145505|有时项目可能缺少settings.gradle文件。确保您要导入的项目中存在该文件。如果没有，请添加包含以下内容的settings.gradle文件：|145506|include+':app'|code-block|syntax|javascript|145507|保存该文件并将其放在项目的顶层文件夹中。|145508|entityMap^0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|O|0|0|8|F|1L|F|0|0|0^^$0|@$1|2|3|-4|4|5|6|1I|7|@]|8|@]|9|$]]|$1|A|3|B|4|C|6|1J|7|@]|8|@]|9|$]]|$1|D|3|-4|4|5|6|1K|7|@]|8|@]|9|$]]|$1|E|3|F|4|5|6|1L|7|@]|8|@]|9|$]]|$1|G|3|-4|4|C|6|1M|7|@]|8|@]|9|$]]|$1|H|3|-4|4|5|6|1N|7|@]|8|@]|9|$]]|$1|I|3|-4|4|5|6|1O|7|@]|8|@]|9|$]]|$1|J|3|K|4|C|6|1P|7|@]|8|@]|9|$]]|$1|L|3|-4|4|5|6|1Q|7|@]|8|@]|9|$]]|$1|M|3|-4|4|5|6|1R|7|@]|8|@]|9|$]]|$1|N|3|O|4|C|6|1S|7|@]|8|@]|9|$]]|$1|P|3|-4|4|5|6|1T|7|@]|8|@]|9|$]]|$1|Q|3|R|4|5|6|1U|7|@]|8|@]|9|$]]|$1|S|3|-4|4|5|6|1V|7|@]|8|@]|9|$]]|$1|T|3|U|4|C|6|1W|7|@]|8|@]|9|$]]|$1|V|3|-4|4|5|6|1X|7|@]|8|@]|9|$]]|$1|W|3|-4|4|5|6|1Y|7|@]|8|@]|9|$]]|$1|X|3|Y|4|C|6|1Z|7|@]|8|@]|9|$]]|$1|Z|3|10|4|5|6|20|7|@$11|21|12|22|13|14]]|8|@]|9|$]]|$1|15|3|16|4|5|6|23|7|@]|8|@]|9|$]]|$1|17|3|18|4|5|6|24|7|@$11|25|12|26|13|14]|$11|27|12|28|13|14]]|8|@]|9|$]]|$1|19|3|1A|4|1B|6|29|7|@]|8|@]|9|$1C|1D]]|$1|1E|3|1F|4|5|6|2A|7|@]|8|@]|9|$]]|$1|1G|3|-4|4|5|6|2B|7|@]|8|@]|9|$]]]|1H|$]]

<ol>
<li>Go to your React-native Project -&gt; Android
</li>
<li>Create a file local.properties
</li>
<li>Open the file
</li>
<li>paste your Android SDK path like below
<pre><code> in Windows sdk.dir = C:\\Users\\USERNAME\\AppData\\Local\\Android\\sdk

 in macOS sdk.dir = /Users/USERNAME/Library/Android/sdk

 in linux sdk.dir = /home/USERNAME/Android/Sdk
</code></pre>
</li>
<li>Replace USERNAME with your user name
</li>
<li>Now, Run the <code>react-native run-android</code> in your terminal
</li>
</ol>
or
Sometimes project might be missing a <code>settings.gradle</code> file.
Make sure that file exists from the project
you are importing.
If not add the <code>settings.gradle</code> file with the following :
<pre><code>include ':app'
</code></pre>
Save the file and put it at the top level folder in your project.

blocks|key|2931300|text|我遇到了同样的问题，但有一点不同的错误信息是|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931301|找不到|2931302|软件开发工具包位置。使用ANDROID_SDK_ROOT环境变量或通过在项目的本地属性文件"xxx“中设置sdk.dir路径来定义位置|blockquote|2931303|2931304|2931305|MAC和ReactNative|offset|length|style|BOLD|2931306|添加+local.properties|CODE|2931307|2931308|查找您的Android+SDK位置|ordered-list-item|2931309|2931310|rootProject/android/local.properties.|2931311|Add+sdk路径下的/Users/yourMacUserName/Library/Android/sdk|unordered-list-item|2931312|
|2931313|Create+local.properties|2931314|2931315|sdk.dir+=+/Users/yourMacUserName/Library/Android/sdk|2931316|这通常是有效的，但如果你和其他团队成员在一个团队中工作，那么yourMacUserName就不同了。|2931317|或|2931318|variable+Set+ANDROID_SDK_ROOT++variable|2931319|2931320|编辑您的~/.zshrc或~/.bashrc或...|2931321|添加SDK路径：|2931322|2931323|导出ANDROID_SDK_ROOT=$HOME/Library/Android/sdk|2931324|Open新的终端标签或source+~/.zshrc|2931325|2931326|echo+$ANDROID_SDK_ROOT以测试打印正确的SDK路径。|2931327|2931328|或者，您也可以添加路径export+PATH=${PATH}:$ANDROID_SDK_ROOT/tools:$ANDROID_SDK_ROOT/platform-tools以使用一些有用的命令。|2931329|entityMap^0|0|0|0|0|0|0|F|0|0|2|3|G|3|G|0|0|0|0|0|10|0|0|0|7|G|0|0|0|U|F|0|0|1|0|D|G|V|8|D|G|0|0|4|8|D|9|0|0|0|0|B|F|0|0|0|M|0|0|B|24|0^^$0|@$1|2|3|4|5|6|7|1W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|1Y|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|20|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|21|8|@$K|22|L|23|M|N]]|9|@]|A|$]]|$1|O|3|P|5|6|7|24|8|@$K|25|L|26|M|N]|$K|27|L|28|M|N]|$K|29|L|2A|M|Q]]|9|@]|A|$]]|$1|R|3|-4|5|6|7|2B|8|@]|9|@]|A|$]]|$1|S|3|T|5|U|7|2C|8|@]|9|@]|A|$]]|$1|V|3|-4|5|6|7|2D|8|@]|9|@]|A|$]]|$1|W|3|X|5|6|7|2E|8|@$K|2F|L|2G|M|Q]]|9|@]|A|$]]|$1|Y|3|Z|5|10|7|2H|8|@]|9|@]|A|$]]|$1|11|3|12|5|6|7|2I|8|@]|9|@]|A|$]]|$1|13|3|14|5|10|7|2J|8|@$K|2K|L|2L|M|Q]]|9|@]|A|$]]|$1|15|3|-4|5|6|7|2M|8|@]|9|@]|A|$]]|$1|16|3|17|5|6|7|2N|8|@]|9|@]|A|$]]|$1|18|3|19|5|6|7|2O|8|@$K|2P|L|2Q|M|Q]]|9|@]|A|$]]|$1|1A|3|1B|5|6|7|2R|8|@$K|2S|L|2T|M|N]]|9|@]|A|$]]|$1|1C|3|1D|5|6|7|2U|8|@$K|2V|L|2W|M|N]|$K|2X|L|2Y|M|N]|$K|2Z|L|30|M|Q]]|9|@]|A|$]]|$1|1E|3|-4|5|6|7|31|8|@]|9|@]|A|$]]|$1|1F|3|1G|5|U|7|32|8|@$K|33|L|34|M|Q]|$K|35|L|36|M|Q]]|9|@]|A|$]]|$1|1H|3|1I|5|U|7|37|8|@]|9|@]|A|$]]|$1|1J|3|-4|5|6|7|38|8|@]|9|@]|A|$]]|$1|1K|3|1L|5|6|7|39|8|@]|9|@]|A|$]]|$1|1M|3|1N|5|10|7|3A|8|@$K|3B|L|3C|M|Q]]|9|@]|A|$]]|$1|1O|3|12|5|6|7|3D|8|@]|9|@]|A|$]]|$1|1P|3|1Q|5|10|7|3E|8|@$K|3F|L|3G|M|Q]]|9|@]|A|$]]|$1|1R|3|-4|5|6|7|3H|8|@]|9|@]|A|$]]|$1|1S|3|1T|5|6|7|3I|8|@$K|3J|L|3K|M|Q]]|9|@]|A|$]]|$1|1U|3|-4|5|6|7|3L|8|@]|9|@]|A|$]]]|1V|$]]

I came across the same issue but a little bit different error message is 

<blockquote>
 SDK location not found. Define location with an ANDROID_SDK_ROOT
 environment variable or by setting the sdk.dir path in your project's
 local properties file at "xxx"
</blockquote>

MAC &amp; ReactNative

Add <code>local.properties</code>

<ol>
<li>Find your Android SDK location

<pre><code>/Users/yourMacUserName/Library/Android/sdk
</code></pre></li>
<li>Create <code>local.properties</code> under <code>rootProject/android/local.properties</code>.</li>
<li>Add sdk path into it

<pre><code>sdk.dir = /Users/yourMacUserName/Library/Android/sdk
</code></pre></li>
</ol>

This normally works, but if you are working in a team with other team members, then <code>yourMacUserName</code> is different.

OR

Set <code>ANDROID_SDK_ROOT</code> variable

<ol>
<li>Edit your <code>~/.zshrc</code> or <code>~/.bashrc</code> or ...</li>
<li>Add SDK path:

<pre><code>export ANDROID_SDK_ROOT=$HOME/Library/Android/sdk
</code></pre></li>
<li>Open a new terminal tab or <code>source ~/.zshrc</code></li>
<li><code>echo $ANDROID_SDK_ROOT</code> to test the print correct SDK path.</li>
</ol>

Alternatively, you also can add your path
<code>export PATH=${PATH}:$ANDROID_SDK_ROOT/tools:$ANDROID_SDK_ROOT/platform-tools</code> 
to use some useful commands.

blocks|key|144281|text|对我来说，问题是在全新安装android+studio之后，我还没有创建任何虚拟设备。因此，expo一直在含糊地抱怨sdk的位置，而主要问题是缺少虚拟设备。希望这对将来有人有帮助，让我找了几个小时。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|144282|PS:在这里你可以找到如何创建一个https://developer.android.com/studio/run/managing-avds|offset|length|144283|entityMap|0|LINK|mutability|MUTABLE|url|https://developer.android.com/studio/run/managing-avds^0|0|H|1I|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@$D|P|E|Q|1|R]]|A|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|M]]]]

For me the problem was that I haven't created any virtual devices after fresh installation of android studio. So, expo kept complaining vaguely about the sdk location while the main issue was the missing virtual devices. Hope this helps somebody in the future, had me searching for a couple of hours.

PS: here you can find out how to create one
<a href="https://developer.android.com/studio/run/managing-avds" rel="nofollow noreferrer">https://developer.android.com/studio/run/managing-avds</a>

blocks|key|2931491|text|在我的例子中，我有错误sdk+location+not+found|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931492|我做了什么:我从git转到克隆的项目，打开项目目录，打开项目中的应用程序目录，复制local.properties文件，然后将其粘贴到项目目录中，然后就可以工作了|2931493|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

In my case i had the error sdk location not found

What i did:
I went to the cloned project from git 
opened the project directory
opened the app directory inside the project
copied the local.properties file
and then pasted it in the project directory
Then it worked

blocks|key|143271|text|对我来说，这个问题是由于打开克隆项目时使用“打开现有项目”而不是“导入”造成的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|143272|下载的工程中已经存在setting.gradle文件。然而，Android+Studio不会使用“打开现有项目”选项来获取它，只有"import“会强制Android+Studio解释整个项目设置。|143273|在M.Palsich的回答中也隐含地提到了同样的想法。|143274|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

For me, this problem is caused by opening the cloned project with &quot;open an existing project&quot; instead of &quot;import&quot;.
The file &quot;setting.gradle&quot; already exists in the downloaded project. However, it doesn't get picked up by Android Studio using &quot;open an existing project&quot; option, only &quot;import&quot; will impose Android Studio to interpret the whole project settings.
The same idea has been mentioned implicitly in M.Palsich's answer.

blocks|key|2931533|text|要了解目录中确切的sdk文件，请转到android+studio，选择tools>sdk|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931534|只需复制并确保它在您的路径中有两个//。|2931535|希望能有所帮助|2931536|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

To know the exact sdk files in your directory, got to android studio, select tools&gt;sdk
just copy and make sure it got double // in your path.
Hope it can help

blocks|key|2931572|text|在我的例子中，我使用的是linux，并在local.properties内的路径两边加上双引号，如下所示|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931573|sdk.dir+=+"/root/Android/Sdk/"
export+ANDROID_SDK_ROOT+=+"/root/Android/Sdk/"|code-block|syntax|javascript|2931574|所以它应该是|2931575|sdk.dir+=+/root/Android/Sdk/
export+ANDROID_SDK_ROOT+=+/root/Android/Sdk/|2931576|和.bash_profile|offset|length|style|BOLD|2931577|​|2931578|📷|atomic|2931579|2931580|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/3fe4b3030c4e95c379bfb15bba6939dc.png|imageAlt^0|0|0|0|0|1|D|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|15|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|16|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|17|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|18|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|19|8|@$M|1A|N|1B|O|P]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1C|8|@]|9|@]|A|$]]|$1|S|3|T|5|U|7|1D|8|@]|9|@$M|1E|N|1F|1|1G]]|A|$]]|$1|V|3|R|5|6|7|1H|8|@]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1I|8|@]|9|@]|A|$]]]|X|$Y|$5|Z|10|11|A|$12|13|14|-4]]]]

In my case I was using linux and putting double quote around the path inside local.properties like
<pre><code>sdk.dir = &quot;/root/Android/Sdk/&quot;
export ANDROID_SDK_ROOT = &quot;/root/Android/Sdk/&quot;
</code></pre>
So it should be
<pre><code>sdk.dir = /root/Android/Sdk/
export ANDROID_SDK_ROOT = /root/Android/Sdk/
</code></pre>
and .bash_profile
<a href="https://i.stack.imgur.com/HJb25.png" rel="noreferrer"><img src="https://i.stack.imgur.com/HJb25.png" alt="enter image description here" /></a>

blocks|key|2931706|text|我在flutter中遇到了这个错误，所以我去安卓->app->build.gradle修复了它|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931707|将targetSdkVersion从28更改为29，将compileSdkVersion从28更改为29，这对我很有效|2931708|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had this error in flutter so i fixed it by going to android-&gt;app-&gt;build.gradle
and changing targetSdkVersion from 28 to 29 and compileSdkVersion to 29 from 28 and it worked for me

blocks|key|144379|text|请按照以下步骤操作：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|144380|android|144381|在'android‘文件夹下创建一个名为'local.properties'|unordered-list-item|144382|
的文件|144383|144384|在文件'local.properties‘中将此行添加为|ordered-list-item|144385|144386|sdk.dir=/Users/bijendrasingh/Library/Android/sdk|144387|在这里添加你的android+sdk路径。|144388|entityMap^0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|U|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|V|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|X|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|Y|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|10|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|11|8|@]|9|@]|A|$]]|$1|R|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|S|$]]

Follow followings steps :
<ol>
<li>Create a file under 'android' folder with name 'local.properties'
</li>
<li>Add this line in file 'local.properties' as
sdk.dir=/Users/bijendrasingh/Library/Android/sdk
</li>
</ol>
Add here your android sdk path.

blocks|key|2718963|text|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2718964|cd+./android，创建文件文件local.properties|ordered-list-item|offset|length|style|CODE|2718965|2718966|将此代码粘贴到sdk.dir=C\:\\Users\\muhammad+ali\\AppData\\Local\\Android\\Sdk+|2718967|2718968|2718969|2718970|将位置更改为根据您的sdk所在的位置。你已经有了local.properties文件，good|2718971|2718972|找到类似的代码sdk.dir=C\:\\Users\\muhammad+ali\\AppData\\Local\\Android\\Sdk文件|2718973|2718974|2718975|2718976|将位置更改为根据您的sdk+is+located|2718977|2718978|运行npx+react-native+run-android的|2718979|2718980|2718981|entityMap^0|0|0|C|J|G|0|0|7|1Q|0|0|0|0|O|G|0|0|7|1Q|0|0|0|0|0|0|2|S|0|0|0^^$0|@$1|2|3|-4|4|5|6|14|7|@]|8|@]|9|$]]|$1|A|3|B|4|C|6|15|7|@$D|16|E|17|F|G]|$D|18|E|19|F|G]]|8|@]|9|$]]|$1|H|3|-4|4|5|6|1A|7|@]|8|@]|9|$]]|$1|I|3|J|4|5|6|1B|7|@$D|1C|E|1D|F|G]]|8|@]|9|$]]|$1|K|3|-4|4|C|6|1E|7|@]|8|@]|9|$]]|$1|L|3|-4|4|5|6|1F|7|@]|8|@]|9|$]]|$1|M|3|-4|4|5|6|1G|7|@]|8|@]|9|$]]|$1|N|3|O|4|C|6|1H|7|@$D|1I|E|1J|F|G]]|8|@]|9|$]]|$1|P|3|-4|4|5|6|1K|7|@]|8|@]|9|$]]|$1|Q|3|R|4|5|6|1L|7|@$D|1M|E|1N|F|G]]|8|@]|9|$]]|$1|S|3|-4|4|C|6|1O|7|@]|8|@]|9|$]]|$1|T|3|-4|4|5|6|1P|7|@]|8|@]|9|$]]|$1|U|3|-4|4|5|6|1Q|7|@]|8|@]|9|$]]|$1|V|3|W|4|C|6|1R|7|@]|8|@]|9|$]]|$1|X|3|-4|4|5|6|1S|7|@]|8|@]|9|$]]|$1|Y|3|Z|4|5|6|1T|7|@$D|1U|E|1V|F|G]]|8|@]|9|$]]|$1|10|3|-4|4|C|6|1W|7|@]|8|@]|9|$]]|$1|11|3|-4|4|5|6|1X|7|@]|8|@]|9|$]]|$1|12|3|-4|4|5|6|1Y|7|@]|8|@]|9|$]]]|13|$]]

<ol>
<li><code>cd ./android</code>, create file file <code>local.properties</code>
</li>
<li>paste this code <code>sdk.dir=C\:\\Users\\muhammad ali\\AppData\\Local\\Android\\Sdk</code>
</li>
<li>change location to as per your sdk is located. you already have <code>local.properties</code> file, good
</li>
<li>find similar file of code <code>sdk.dir=C\:\\Users\\muhammad ali\\AppData\\Local\\Android\\Sdk</code>
</li>
<li>change location to as per your sdk is located
</li>
<li>run <code>npx react-native run-android</code>
</li>
</ol>

blocks|key|143350|text|我遇到的问题是local.properties被提交到了git仓库中，尽管它明确表示不要这样做，##+This+file+must+*NOT*+be+checked+into+Version+Control+Systems,。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|143351|为了在MacOS上本地修复这个问题，我刚刚访问了Android+Studio中的File+>+Project+Structure...，它自动修复了这个问题。|143352|为了修复git中的问题，我在项目根目录中执行了以下命令：|143353|echo+-e+"\nlocal.properties"+>>+.gitignore
git+add+.gitignore
git+rm+local.properties+--cached
git+commit+-m+"Removed+local.properties+from+the+git"|code-block|syntax|javascript|143354|entityMap^0|7|G|1C|1S|0|14|R|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|V|8|@$9|W|A|X|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|Y|8|@]|D|@]|E|$]]|$1|J|3|K|5|L|7|Z|8|@]|D|@]|E|$M|N]]|$1|O|3|-4|5|6|7|10|8|@]|D|@]|E|$]]]|P|$]]

The issue I had is that <code>local.properties</code> was committed into git repository even though it says explicitly not to do it <code>## This file must *NOT* be checked into Version Control Systems,</code>.
To fix the issue locally on MacOS I just went to <code>File &gt; Project Structure...</code> in Android Studio and it fixed it automatically.
To fix the issue in the git I executed the following commands in the project root directory:
<pre><code>echo -e &quot;\nlocal.properties&quot; &gt;&gt; .gitignore
git add .gitignore
git rm local.properties --cached
git commit -m &quot;Removed local.properties from the git&quot;
</code></pre>

blocks|key|145732|text|正如我所检查的，当他们在Android目录中创建local.properties文件并写入路径时，仍然会出现错误。你得到错误的原因是因为在写入路径中有拼写错误。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145733|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

As I checked that some are still getting error when they create local.properties file in Android directory and writes the path.
The reason you're getting error is because there's spelling mistake in writing path.

blocks|key|145748|text|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145749|转到本地属性文件|ordered-list-item|145750|145751|145752|检查Sdk位置(如果您将文件导入到其他用户的Sdk位置，则该位置可能已更改，找到您的文件并将其正确无误，就这样)。|145753|145754|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|-4|4|5|6|K|7|@]|8|@]|9|$]]|$1|A|3|B|4|C|6|L|7|@]|8|@]|9|$]]|$1|D|3|-4|4|5|6|M|7|@]|8|@]|9|$]]|$1|E|3|-4|4|5|6|N|7|@]|8|@]|9|$]]|$1|F|3|G|4|C|6|O|7|@]|8|@]|9|$]]|$1|H|3|-4|4|5|6|P|7|@]|8|@]|9|$]]|$1|I|3|-4|4|5|6|Q|7|@]|8|@]|9|$]]]|J|$]]

<ol>
<li>Go to your local properties file
</li>
<li>Check the Sdk location (It might have been changed if you have imported file with a
another user's Sdk location, find yours and get it right, that's it).
</li>
</ol>

blocks|key|2719064|text|可能有两种不同的可能性：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2719065|1)。local.properites文件中的SDK位置不正确。|2719066|2)。或者文件丢失，如果你克隆了一个项目，可能会发生这种情况，所以只需在Gradle+Scripts文件夹下创建一个local.properites文件，然后设置sdk路径。|2719067|如下所示设置正确的sdk路径：|2719068|sdk.dir=YOUR_PATH_TO_THE_SDK|code-block|syntax|javascript|2719069|对于mac用户，路径应为：|2719070|/Users/USER_NAME/Library/Android/sdk|2719071|对于windows用户，路径应为：|2719072|c:\Users\USER_NAME\AppData\Local\Android\Sdk+|2719073|entityMap^0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|Y|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|10|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|11|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|12|8|@]|9|@]|A|$K|L]]|$1|Q|3|R|5|6|7|13|8|@]|9|@]|A|$]]|$1|S|3|T|5|J|7|14|8|@]|9|@]|A|$K|L]]|$1|U|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|V|$]]

There can be two different possibilities :
1). Either you SDK location is incorrect in local.properites file.
2). Or the file is missing, this can happen if you have cloned a project, so just create a local.properites file under Gradle Scripts foler, and then set up the sdk path.
Set up the correct sdk path like this :
<pre><code>sdk.dir=YOUR_PATH_TO_THE_SDK
</code></pre>
For mac users the path should be:
<pre><code>/Users/USER_NAME/Library/Android/sdk
</code></pre>
For windows users the path should be:
<pre><code>c:\Users\USER_NAME\AppData\Local\Android\Sdk 
</code></pre>

blocks|key|144446|text|我遇到过这样一种情况:我已经设置了local.properties文件，但仍然收到这个错误。结果是，如果您的项目有子模块，则还必须将local.properties复制到子模块文件夹中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|144447|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had a situation where I already had the local.properties file set up but I was still getting this error. Turns out, if your project has a submodule, you have to copy the local.properties into the submodule folder as well.

blocks|key|2931831|text|打开Android+Studio，进入文件菜单，选择文件结构，然后指定一个带有你在“compileSdkVersion+/build.gradle”文件中定义的compileSdkVersion或targetSdkVersion的SDK。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2931832|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Open Android Studio, go to the File menu and select File Structure and specify an SDK with compileSdkVersion or targetSdkVersion that you defined in the &quot;app/build.gradle&quot; file.

blocks|key|145779|text|如果您使用的是Flutter，您显然会尝试更改Androidmainfest.xml的名称，但不要将其改回原来的名称。在Flutter中，一些包可以帮助您实现这一点|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145780|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you are using Flutter you clearly try to change the name from Androidmainfest.xml just don't change it back to the old name some packages would help you with that in pub.dev

blocks|key|143417|text|type|unstyled|depth|inlineStyleRanges|entityRanges|data|143418|first方案:-|unordered-list-item|offset|length|style|BOLD|143419|143420|143421|在您的工程中查找local.properties文件并设置sdk路径。|143422|143423|second方案:-|143424|143425|143426|如果您没有，则从其他项目复制并根据您的sdk路径进行设置。|143427|entityMap^0|0|0|9|0|0|0|0|0|0|A|0|0|0|0^^$0|@$1|2|3|-4|4|5|6|U|7|@]|8|@]|9|$]]|$1|A|3|B|4|C|6|V|7|@$D|W|E|X|F|G]]|8|@]|9|$]]|$1|H|3|-4|4|5|6|Y|7|@]|8|@]|9|$]]|$1|I|3|-4|4|5|6|Z|7|@]|8|@]|9|$]]|$1|J|3|K|4|5|6|10|7|@]|8|@]|9|$]]|$1|L|3|-4|4|5|6|11|7|@]|8|@]|9|$]]|$1|M|3|N|4|C|6|12|7|@$D|13|E|14|F|G]]|8|@]|9|$]]|$1|O|3|-4|4|5|6|15|7|@]|8|@]|9|$]]|$1|P|3|-4|4|5|6|16|7|@]|8|@]|9|$]]|$1|Q|3|R|4|5|6|17|7|@]|8|@]|9|$]]|$1|S|3|-4|4|5|6|18|7|@]|8|@]|9|$]]]|T|$]]

<ul>
<li>first scenario :-</li>
</ul>
<hr />
look for local.properties file in your project and
set sdk path.
<ul>
<li>second scenario :-</li>
</ul>
<hr />
if you you don't have one then copy from other project and set it according your sdk path .

blocks|key|144493|text|我用文件/无效缓存/重启解决了这个问题，然后点击Set+SDK...当出现错误提示时。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|144494|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I solved that issue with File/Invalide cache/Restart, then click on Set SDK.... when prompted by the error.

I recently tried to import sample Android games I downloaded from Google's developer website. After importing them into Android Studio, I'm getting the following error:

<blockquote>
 Error: SDK location not found. Define location with <code>sdk.dir</code> in the local.properties file or with an <code>ANDROID_HOME</code> environment variable.
</blockquote>

What is this? I want to run the sample programs from Android Studio.

SDK location not found. Define location with sdk.dir in the local.properties file or with an ANDROID_HOME environment variable

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

最近，我试着导入我从谷歌开发者网站下载的Android游戏样本。在将它们导入Android Studio后，我得到了以下错误：错误:找不到SDK位置。使用local.properties文件中的sdk.dir或ANDROID_HOME环境变量定义位置。这是什么？我想运行Android Studio中的示例程序。

问找不到SDK位置。使用local.properties文件中的sdk.dir或ANDROID_HOME环境变量定义位置
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问找不到SDK位置。使用local.properties文件中的sdk.dir或ANDROID_HOME环境变量定义位置EN