MSB3073:命令"mc :VCEnd“已退出，代码为1
MSB3073:命令"mc :VCEnd“已退出，代码为1
提问于 2019-09-13 13:36:04
我试图在visual studio 2019中编译log4cpp_x86，但它给我的错误如下：
我尝试将项目的位置从D:更改为C:，但问题仍然存在，我还将文件夹取消标记为ReadOnly，但也不起作用。
此外，当我单击错误(即标记为MSB3073 )时，它会将我重定向到Microsoft.CppCommon.targets中的行，该行的xml标记为：
<Exec Command="%(CustomBuildStep.Command)$(_BuildSuffix)"/> 回答 1
Stack Overflow用户
回答已采纳
发布于 2019-09-16 22:42:18
正如@HansPassant建议的link在我的例子中只是半个解决方案，但在执行该链接中建议的步骤之前，我将整个log4cpp项目的解决方案文件替换为xml标签，如下所示
<CustomBuildStep> <Command>mc $(InputPath)</Command> </CustomBuildStep>旧项目具有具有以下标记的解决方案文件，
<CustomBuild Include="..\NTEventLogCategories.mc">
<Command Condition="'$(Configuration)|$(Platform)'=='Debug with Boost|Win32'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h "$(OutDir)" -r "$(OutDir)" "$(ProjectDir)..\%(Filename).mc"
rc.exe -r -fo "$(OutDir)%(Filename).res" "$(OutDir)%(Filename).rc"
link.exe /MACHINE:IX86 -dll -noentry -out:"$(OutDir)NTEventLogAppender.dll" "$(OutDir)%(Filename).res"
</Command>
<Command Condition="'$(Configuration)|$(Platform)'=='Debug with Boost|x64'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h "$(OutDir)" -r "$(OutDir)" "$(ProjectDir)..\%(Filename).mc"
rc.exe -r -fo "$(OutDir)%(Filename).res" "$(OutDir)%(Filename).rc"
link.exe /MACHINE:IX86 -dll -noentry -out:"$(OutDir)NTEventLogAppender.dll" "$(OutDir)%(Filename).res"
</Command>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Debug with Boost|Win32'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Debug with Boost|x64'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h "$(OutDir)" -r "$(OutDir)" "$(ProjectDir)..\%(Filename).mc"
rc.exe -r -fo "$(OutDir)%(Filename).res" "$(OutDir)%(Filename).rc"
link.exe /MACHINE:IX86 -dll -noentry -out:"$(OutDir)NTEventLogAppender.dll" "$(OutDir)%(Filename).res"
</Command>
<Command Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h "$(OutDir)" -r "$(OutDir)" "$(ProjectDir)..\%(Filename).mc"
rc.exe -r -fo "$(OutDir)%(Filename).res" "$(OutDir)%(Filename).rc"
link.exe /MACHINE:IX86 -dll -noentry -out:"$(OutDir)NTEventLogAppender.dll" "$(OutDir)%(Filename).res"
</Command>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Command Condition="'$(Configuration)|$(Platform)'=='Release with Boost|Win32'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h $(OutDir) -r $(OutDir) $(ProjectDir)..\%(Filename).mc
RC.exe -r -fo $(OutDir)%(Filename).res $(OutDir)%(Filename).rc
link.exe /MACHINE:IX86 -dll -noentry -out:$(OutDir)NTEventLogAppender.dll $(OutDir)%(Filename).res
</Command>
<Command Condition="'$(Configuration)|$(Platform)'=='Release with Boost|x64'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h $(OutDir) -r $(OutDir) $(ProjectDir)..\%(Filename).mc
RC.exe -r -fo $(OutDir)%(Filename).res $(OutDir)%(Filename).rc
link.exe /MACHINE:IX86 -dll -noentry -out:$(OutDir)NTEventLogAppender.dll $(OutDir)%(Filename).res
</Command>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Release with Boost|Win32'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Release with Boost|x64'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h $(OutDir) -r $(OutDir) $(ProjectDir)..\%(Filename).mc
RC.exe -r -fo $(OutDir)%(Filename).res $(OutDir)%(Filename).rc
link.exe /MACHINE:IX86 -dll -noentry -out:$(OutDir)NTEventLogAppender.dll $(OutDir)%(Filename).res
</Command>
<Command Condition="'$(Configuration)|$(Platform)'=='Release|x64'">"$(VS100COMNTOOLS)vsvars32.bat" if not exist $(OutDir) md $(OutDir)
mc.exe -h $(OutDir) -r $(OutDir) $(ProjectDir)..\%(Filename).mc
RC.exe -r -fo $(OutDir)%(Filename).res $(OutDir)%(Filename).rc
link.exe /MACHINE:IX86 -dll -noentry -out:$(OutDir)NTEventLogAppender.dll $(OutDir)%(Filename).res
</Command>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
<Outputs Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(OutDir)NTEventLogAppender.dll;%(Outputs)</Outputs>
</CustomBuild> 然后我按照@HansPassant建议的链接的步骤，但是我没有在那个link中遵循第一步(即下载新版本的log4cpp)，而是用旧的项目替换了项目，然后按照链接中的建议遵循所有的步骤，这解决了我的问题。
页面原文内容由Stack Overflow提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://stackoverflow.com/questions/57917803
复制相关文章
相似问题
腾讯云开发者
