本文基于CH579实现一个最小外围设备，在官方历程Peripheral的基础上精简。...2、Peripheral_Init函数 void Peripheral_Init( ) { Peripheral_TaskID = TMOS_ProcessEventRegister( Peripheral_ProcessEvent..., SBP_START_DEVICE_EVT ); //启动Peripheral_TaskID任务下的SBP_START_DEVICE_EVT事件，其中tmos_set_event函数用于立刻执行某个事件...} 3、Peripheral_ProcessEvent任务回调函数 注册了任务回调函数之后，通过函数tmos_set_event或者tmos_start_task启动某个事件，会回调到这个函数中，任务中有..., &Peripheral_BondMgrCBs, &Peripheral_PeripheralCBs ); return ( events ^ SBP_START_DEVICE_EVT );
低功耗蓝牙BLE外围模式(peripheral)-使用BLE作为服务端 Android对外模模式(peripheral)的支持 从Android5.0开始才支持 关键术语和概念 以下是关键BLE术语和概念的摘要
*dict = @{@"peripheral":peripheral, @"RSSI":RSSI}; [self.deviceArray addObject:dict]; }...isExist = YES; NSDictionary *dict = @{@"peripheral":peripheral, @"RSSI":RSSI};...isExist) { NSDictionary *dict = @{@"peripheral":peripheral, @"RSSI":RSSI}; [self.deviceArray...:(CBPeripheral *)peripheral didDiscoverServices:(nullable NSError *)error { NSString *UUID = [peripheral.identifier...[peripheral discoverCharacteristics:nil forService:service]; } } 再然后是遍历服务中的特性： - (void)peripheral
successfully started 9/30/2023, 7:16:23 PM - info - BluetoothLowEnergyService: Discovered nearby BLE peripheral...94f827ed0156 and RSSI -67 9/30/2023, 7:16:23 PM - info - BluetoothLowEnergyService: Discovered nearby BLE peripheral...a08222913ca7 and RSSI -60 9/30/2023, 7:16:23 PM - info - BluetoothLowEnergyService: Discovered nearby BLE peripheral...68e4785c6a73 and RSSI -86 9/30/2023, 7:16:23 PM - info - BluetoothLowEnergyService: Discovered nearby BLE peripheral...5d04301c9dbe and RSSI -75 9/30/2023, 7:16:24 PM - info - BluetoothLowEnergyService: Discovered nearby BLE peripheral
扫描外设中的服务 // 设置设备的代理 peripheral.delegate = self; // services:传入nil 代表扫描所有服务 [peripheral discoverServices...:nil]; 5.1 发现并获取外设中的服务 /** 扫描到服务 @param peripheral 服务对应的设备 @param error 扫描错误信息 */ - (void)peripheral...设备 @param service 特征对应的服务 @param error 错误信息 */ - (void)peripheral:(CBPeripheral *)peripheral didDiscoverCharacteristicsForService...:(CBService *)service error:(NSError *)error { NSLog(@"%@",peripheral); } 6.2 给对应特征写数据 [peripheral...读取到数据对应的设备 @param characteristic 特征 @param error 错误信息 */ - (void)peripheral:(CBPeripheral *)peripheral
// 外设 var peripheral: CBPeripheral? // 外设数组 var peripherals: [CBPeripheral]!...self.title = "已断开" + (self.peripheral!.name)!...self.peripheral = nil } override func viewDidLoad() { super.viewDidLoad...self.peripherals.contains(peripheral) { self.peripherals?....后台打印.png 注意问题 一定要真机测试 断开的时候，一定要将 self.peripheral赋值为nil，否则第一次连接之后就再也连接不上了
To access Bluetooth peripheral data specifically, it must include NSBluetoothPeripheralUsageDescription..., didFailToConnect peripheral: CBPeripheral, error: Error?)...{ NSLog("连接设备失败") } 扫描已连接外围设备服务 func peripheral(_ peripheral: CBPeripheral, didDiscoverServices...) } } } 扫描到特征值后的操作 func peripheral(_ peripheral: CBPeripheral, didDiscoverCharacteristicsFor...匹配到后你可以选择保存他的特征值从而在后面自行操作，或者用readValue读取它的值，并由系统自动调用下面介绍的方法 获取具体值之后的操作 func peripheral(_ peripheral:
NS_AVAILABLE(NA, 6_0); //外设服务变化时回调的方法 - (void)peripheral:(CBPeripheral *)peripheral didModifyServices...- (void)peripheral:(CBPeripheral *)peripheral didDiscoverServices:(nullable NSError *)error; //在服务中发现子服务回调的方法...- (void)peripheral:(CBPeripheral *)peripheral didDiscoverIncludedServicesForService:(CBService *)service... *)error; //向特征值写数据时回调的方法 - (void)peripheral:(CBPeripheral *)peripheral didWriteValueForCharacteristic... *)error; //写描述信息时触发的方法 - (void)peripheral:(CBPeripheral *)peripheral didWriteValueForDescriptor:(CBDescriptor
CoreBluetooth框架的核心是peripheral和 central, 可以理解成外设和中心，发起连接的是central，被连接的设备为 peripheral，它们是一组相对概念。...Peripheral广播自己的Service和characteristic，Central订阅某一个具体的characteristic，Peripheral就和Central之间通过characteristic...启动一个 Peripheral 管理对象 2. 本地 Peripheral 设置服务,特性,描述，权限等等 3. Peripheral 发送广播 4....]; //标记外设，让它的生命周期与控制器的一致 self.peripheral= peripheral; //可以根据外设名字来过滤外设...:peripheral options:nil]; } 6.
{ //判断是否可用 if (peripheral.state==CBPeripheralManagerStatePoweredOn) { //添加服务 ... = peripheral; //进行连接 [_centerManger connectPeripheral:peripheral options:@{CBConnectPeripheralOptionNotifyOnConnectionKey...{ NSLog(@"连接成功"); //设置代理与搜索外设中的服务 [peripheral setDelegate:self]; [peripheral discoverServices... *)peripheral didDiscoverServices:(NSError *)error{ for (CBService *service in peripheral.services..._isCentral) { [_centerManger cancelPeripheralConnection:_peripheral]; [_peripheral setNotifyValue
1.基础概念 (1) Bus Access Module (BAM)，总线访问模块 BAM is used to move data to/from the peripheral buffers.... (2) BAM Low-Speed Peripheral (BLSP)，低速接口的总线访问模块 (3) QUP：Qualcomm Universal Peripheral，高通统一的外设 2....Msm8937 BLSP BLSP是高通对于低速接口的一种管理方式，8937 平台含有两个BLSP(BAM Low-Speed Peripheral) 块，对应于12个BLSP端口。...每一个BLSP块含有最多六个Qualcomm Universal Peripheral (QUP)和六个UART cores、其中SPI和IC2核心集成到一个名字为QUP核心，并且共享同一个FIFO，而...– Driven by UART or QUP; shared at the peripheral level for status updates and errors of the peripheral
isNewPeripheral) .map { self.scannedPeripherals.append($0) } .map { [SectionModel(model: "Peripheral....subscribe(handleEvent) .addDisposableTo(disposeBag) } func handleEvent(event: Event<Peripheral..., sender: peripheral) case .Error(let error): let alertController = UIAlertController(title...流程： 发现服务 发现特征（对应了硬件那边所谓的通道……） 构建dataSource，并与tableView绑定 核心代码： func bindDataSource() { guard let peripheral...= peripheral else { return } peripheral.discoverServices(nil) .flatMap(discoverCharacteristics
//设置扫描到设备的委托 [baby setBlockOnDiscoverToPeripherals:^(CBCentralManager *central, CBPeripheral *peripheral..., NSDictionary *advertisementData, NSNumber *RSSI) { NSLog(@"搜索到了设备:%@",peripheral.name);...) { NSLog(@"PeripheralManager trun status code: %ld",(long)peripheral.state); }]; //设置添加...set didAddService block [baby peripheralModelBlockOnDidStartAdvertising:^(CBPeripheralManager *peripheral...service委托 | set didAddService block [baby peripheralModelBlockOnDidAddService:^(CBPeripheralManager *peripheral
== nil) { return; } if((__bridge CFUUIDRef )peripheral.identifier == NULL) return;...options:nil]; //发起连接的命令 self.peripheral = peripheral; } } } } /...注意上面设置了peripheral.delegate，所以需要实现CBPeripheralDelegate的代理方法。...peripheral:didDiscoverCharacteristicsForService:error:是发现特征的回调，用于获取读和写的特征。...代码如下： #pragma mark - CBPeripheralDelegate //发现服务的回调 - (void)peripheral:(CBPeripheral *)peripheral didDiscoverServices
buffers. (2) BAM Low-Speed Peripheral (BLSP)，低速接口的总线访问模块 (3) QUP：Qualcomm Universal Peripheral，高通统一的外设...2.Msm8937 BLSP BLSP是高通对于低速接口的一种管理方式，8937 平台含有两个BLSP(BAM Low-Speed Peripheral) 块，对应于12个BLSP端口。...每一个BLSP块含有最多六个Qualcomm Universal Peripheral (QUP)和六个UART cores、其中SPI和IC2核心集成到一个名字为QUP核心，并且共享同一个FIFO，而...– Driven by UART or QUP; shared at the peripheral level for status updates and errors of the peripheral...; a status register in the peripheral core allows software to distinguish between interrupt sources 参考
: CBPeripheral) { if peripheral.name !...name { } currentPeripheral = peripheral manager.connect(peripheral, options:...{ print("断开链接 设备 =\(peripheral.name ??..."")) for service in peripheral.services!...break } } } //发现特征 func peripheral(_ peripheral: CBPeripheral, didDiscoverCharacteristicsFor
"Device 87d0" 01:00.2 "System peripheral" "PLX Technology, Inc."..."Device 87d0" 01:00.3 "System peripheral" "PLX Technology, Inc."..."Device 87d0" 01:00.4 "System peripheral" "PLX Technology, Inc."..."Device 87d0" 01:00.2 "System peripheral" "PLX Technology, Inc."..."Device 87d0" 01:00.3 "System peripheral" "PLX Technology, Inc."
1、整体框图 实现思路：CH579作为外部设备（Peripheral），串口接收（RX）来自外部mcu的数据，通过蓝牙（ble4.2）发送到中心设备（Center）（上图中是手机），通过蓝牙接收来自中心设备的数据...,SBP_DATA_TX_EVT); tmos_start_task(Peripheral_TaskID,SBP_DATA_READY_EVT,SBP_DATA_READY_EVT_PERIOD...,SBP_DATA_TX_EVT); tmos_start_task(Peripheral_TaskID,SBP_DATA_READY_EVT,SBP_DATA_READY_EVT_PERIOD...\r\n"); return; } else { tmos_start_task(Peripheral_TaskID,SBP_DATA_TX_EVT...,SBP_DATA_TX_EVT); tmos_start_task(Peripheral_TaskID,SBP_DATA_READY_EVT,SBP_DATA_READY_EVT_PERIOD
有时无线透传在无法布线时有很方便的效用，不妨试试蓝牙透传，效果如下： 具体是无线数据->串口数据，串口数据->无线数据，目前前者实现了，后者还有些问题未解决， 实现过程如下，基于工程demo/Bluetooth/peripheral_demo...改成peripheral_uart_demo，同时目录下peripheral_uart_demo/gcc/defconfig文件里工程名也改成peripheral_uart_demo，然后引入串口读写独立接口即把...demo/at_demo下的serial.c、serial.h、serial_debug.h复制到刚才peripheral_uart_demo工程下，由于要无线写以及串口写转无线，所以profile涉及到
Devices.Contains(peripheral)) { Devices.Add(peripheral);...private BluetoothDevice(CBPeripheral peripheral) { _peripheral = peripheral;...} public static implicit operator BluetoothDevice(CBPeripheral peripheral) {...return peripheral == null ?...null : new BluetoothDevice(peripheral); } public static implicit operator CBPeripheral
领取专属 10元无门槛券
手把手带您无忧上云
云服务器
即时通信 IM
ICP备案
对象存储
实时音视频
