最近遇到了nginx疯狂抛错,access.log一天一共5W多条,但error.log中有大概9K多条,基本都是111: Connection refused,这到底是为什么呢?...当中抛错的日志(稍微分一下行,否则实在太长,敏感信息稍微处理了一下): 2019/06/06 10:09:45 [error] 28652#0: *883239 connect() failed (111: Connection...refused) while connecting to upstream, client: 124.104.90.145, server: xxx.xxxxx.com, request: "POST
通过实验再次说明下“Connection refused”和“No route to host”的区别和问题诊断思路。...首先,网上有篇帖子说明“Connection refused” vs “No route to host”(http://superuser.com/questions/720851/connection-refused-vs-no-route-to-host...): "Connection refused" means that the target machine actively rejected the connection....从172.1.1.1 telnet 172.1.2.1 10001,提示connection refused。...然后如果通过了防火墙,但监听未启动,则提示Connection refused的错误。
摘要 在开发与运维工作中,Connection Refused 是一个常见的错误提示,通常表示无法成功连接目标服务。...引言 什么是 Connection Refused? Connection Refused 表示客户端尝试连接目标服务器时,服务器拒绝了该连接请求。...解决 Connection Refused: 系统错误 常见的触发场景: 访问本地或远程服务时(如 HTTP、TCP 连接)。 使用 SSH 或远程桌面连接服务器。 数据库服务连接失败。...port 22: Connection refused 数据库连接错误 SQLException: Connection refused: connect 接下来,我们将通过实际场景的分析与代码示例,...正文 一、问题原因分析 导致 Connection Refused 错误的主要原因包括: 目标服务未启动:目标服务器上的服务进程未运行或意外停止。
zabbix-Get value from agent failed: cannot connect to [[127.0.0.1]:10050]: [111] Connection refused...监控zabbix服务端这台服务器,然后显示Get value from agent failed: cannot connect to [[127.0.0.1]:10050]: [111] Connection...refused 看到agent然后又看到10050端口 直接telnet语句去检测 第一种:端口不通 解决方法: agent端的ip为192.168.85.11,server端的ip为192.168.85.11
摘要 Connection refused: connect 是开发者在与服务器或远程服务通信时常见的错误。...引言 当我们尝试通过网络建立连接时,出现 Connection refused: connect 错误通常意味着目标地址无法被访问。...", 8080); 出现错误提示: java.net.ConnectException: Connection refused: connect 连接远程服务器: 通过 SSH 或其他协议连接服务器时...: Connection refused: connect 二、根本原因分析 出现该错误的原因主要集中在以下几方面: 服务未启动:目标服务器或服务进程没有正常运行。...总结 Connection refused: connect 错误常见但并不可怕。关键在于逐步排查问题原因,从服务状态、网络配置、代码设置等方面着手,最终解决问题。
k3s集群,Node节点出现这个报错:The connection to the server localhost:8080 was refused - did you specify the right
问题描述: 本地安装hadoop单机模式的时候需要启动namenode时报错 pdsh@xxx: localhost: connect: Connection refused 解决方案(过程): 原因是
Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address ...
当服务器异常退出后,在下一次登陆时会出现如下问题,这种情况应该是服务器IP变了,而vnc还在监听原来的IP上的数据:
下面是自己对tcp握手过程中出现Connection refused和Connection timed out的总结。...3.1 Connection refused 使用telnet来检查tcp链路时,如果遇到"Connection refused"的错误,那么表示从本地客户端到目标IP地址的路由是正常的,但是该目标端口没有进程在监听...当使用tcpdump或wireshark抓包工具来探测发送过来的请求报文包时,Connection refused将会看到Syn,Rst。...3.2 Connection timed out 如果telnet的时候,TCP路由不正常,那么会得到一个Connection timed out的错误。"...但是由于客户端和目标IP的路由无法建立(也就是BZ遇到的情况),所以在3分钟后该tcp链路显示Connection timed out。
接着输入命令链接到 telnet 服务 telnet 127.0.0.1 11211 这时候提示:telnet: connect to address 127.0.0.1: Connection refused
在使用IDEA的时候,有时候在使用maven的时候,比如Download Sources,就会遇到错误java.rmi.ConnectException: Connection refused to...host: 127.0.0.1 问题表现 比如下载Jar包源码的时候Download Sources,就会得到如下异常栈: Caused by: java.rmi.ConnectException: Connection...refused to host: 127.0.0.1; nested exception is: java.net.ConnectException: Connection refused (Connection...refused) at java.rmi/sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:619) at java.rmi
问题现象: xxx@yyy:/opt/hadoop$ ssh localhost ssh: connect to host localhost port 22: Connection refused
java.net.ConnectException: Connection refused: connect 1. 报错如上。 2....它们可能没有连接到LAN或互联网或任何其他网络,在这种情况下,Java将会抛出 客户端的“ java.net.ConnectException:Connection refused ”异常。...参考:https://javarevisited.blogspot.com/2013/02/java-net-ConnectException-Connection-refused.html
Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is: java.net.ConnectException...: Connection refused: connect at java.rmi/sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java...Executors.java:665) at java.base/java.lang.Thread.run(Thread.java:834) Caused by: java.rmi.ConnectException: Connection...refused to host: 127.0.0.1; nested exception is: java.net.ConnectException: Connection refused (Connection...refused) at java.rmi/sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:623) at java.rmi
今天将laravel项目部署到linux时,nginx日志报错nginx connect() failed (111: Connection refused) while connecting to upstream
DB::NetException: Connection refused (localhost:9000) 解决方法,我是先将/var/lib/clickhouse/data下面的创建的mysql引擎的数据库目录删除掉
原因:kubernetes master没有与本机绑定,集群初始化的时候没有绑定,此时设置在本机的环境变量即可解决问题。
三、修改mysql配置文件,将bind-address = 127.0.0.1注释,开放所有连接
领取专属 10元无门槛券
手把手带您无忧上云