id=3187)，参考对方的解决方案感觉是自己没安装对固件(firmware)。 最后定位了自己的问题：内核中无线网卡固件和无线网卡硬件不一致。...id=3187) Linux wireless b43 firmware-archive(http://linuxwireless.sipsolutions.net/en/users/Drivers/b43.../) 这个链接详细介绍在Linux上安装和硬件版本一致的firmware的过程。...Linux wireless b43 firmware(https://wireless.wiki.kernel.org/en/users/drivers/b43)
EdgeCore AS6700 ONIE固件，用最新ONIE官方源编译 官方代码有一个bug:
https://github.com/bitcraze/lps-node-firmware代码中uwb_tdoa_anchor2.c代码解析： 根据该文件的注释，TDOA测距的实现使用的是TDMA的原理
使用megaraid修复raid1掉线硬盘 使用说明： 查看硬盘状态 ~# megacli -PDList -aAll -NoLog | grep 'Firmware state' Firmware state...-PhysDrv[252:0] -a0 ~# megacli -PDList -aAll -NoLog | grep 'Firmware state' Firmware state: Unconfigured...state' Firmware state: Rebuild Firmware state: Online, Spun Up ~# megacli -PDRbld -ShowProg -PhysDrv...Exit Code: 0x00 Rebuild后硬盘恢复在线 ~# megacli -PDList -a0 |grep "Firmware state" Firmware state: Online,...Spun Up Firmware state: Online, Spun Up
/fsbl-firmware/”。...编译FSBL代码 使用命令“petalinux-build -c fsbl-firmware -x distclean && petalinux-build -c fsbl-firmware”，能编译...build/tmp/work/zc706-xilinx-linux-gnueabi/fsbl-firmware/2021.2+git999-r0/fsbl-firmware-2021.2+git999/...注意事项 从PetaLinux 2021.1起，FSBL的 recipe 名称，从fsbl.bb改为了fsbl-firmware.bb。编译时，要使用fsbl-firmware，而不是fsbl。...recipe fsbl-firmware-2021.2+git999-r0: task do_fetch: Started NOTE: recipe fsbl-firmware-2021.2+git999
"Firmware state" Firmware state: Online, Spun Up Firmware state: Unconfigured(good), Spun Up Firmware...state: Online, Spun Up Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware state...: Online, Spun Up Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware state: Online...Firmware state: Copyback Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware state...Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware
All good.Uncompressing ASCEND310B FIRMWARE RUN PACKAGE 100% [Firmware] [2024-06-13 11:20:03] [INFO].../upgrade[Firmware] [2024-06-13 11:20:03] [INFO]Firmware package has been installed on the path /usr/local...y[Firmware] [2024-06-13 11:20:31] [INFO]upgradePercentage: 0%[Firmware] [2024-06-13 11:20:40] [INFO]upgradePercentage...: 4%[Firmware] [2024-06-13 11:20:48] [INFO]upgradePercentage: 36%[Firmware] [2024-06-13 11:20:57] [INFO...]upgradePercentage: 99%[Firmware] [2024-06-13 11:21:02] [INFO]upgradePercentage: 100%[Firmware] [2024
为例，应用时替换目录路径即可 cmd： TAKEOWN /F C:\Windows\Firmware /A /R /D Y ICACLS C:\Windows\Firmware /T /grant :r...Administrators:F 或者 cygwin bash： cmd.exe /c "TAKEOWN /F C:\Windows\Firmware /A /R /D Y" cmd.exe /c "...，所以新买的笔记本一定要执行这句命令禁止访问C:\Windows\Firmware： icacls C:\Windows\Firmware /deny *S-1-1-0:(OI)(CI)F 后面如果想复原...C:\Windows\Firmware目录权限： TAKEOWN /F C:\Windows\Firmware /A /R /D Y ICACLS C:\Windows\Firmware /T /grant...:r Administrators:F 或者 cmd.exe /c "TAKEOWN /F C:\Windows\Firmware /A /R /D Y" cmd.exe /c "ICACLS C:\
.bin firmware2.bin firmware3.bin 注意： 如果您需要页面输出安装most实用程序，因为它更好地支持彩色输出的分页。...仅在--hexdump期间显示包含 绿色字节的行： $ binwalk -W --green firmware1.bin firmware2.bin firmware3.bin 仅在--hexdump期间显示包含...红色字节的行： $ binwalk -W --red firmware1.bin firmware2.bin firmware3.bin 仅在--hexdump期间显示包含 蓝色字节的行： $ binwalk...-W --blue firmware1.bin firmware2.bin firmware3.bin 提取签名扫描期间识别的文件( -D,--dd=) 提取 -...$ binwalk --diff -K 8 firmware1.bin firmware2.bin 扫描之前反转n个字节( -g,--swap=) $ binwalk --swap=2 firmware.bin
果断的换了: 编辑 /etc/apt/sources.list 写入新的 : deb https://deb.debian.org/debian bookworm main non-free-firmware...bookworm main non-free-firmware deb-src https://debian.mirror.constant.com bookworm main non-free-firmware...deb https://deb.debian.org/debian-security/ bookworm-security main non-free-firmware deb-src https:...main non-free-firmware #deb https://deb.debian.org/debian bookworm-backports main non-free-firmware...#deb-src https://deb.debian.org/debian bookworm-backports main non-free-firmware 顺利解决.
broadcom-sta-dkms firmware-iwlwifi firmware-realtek firmware-misc-nonfree cd /lib/firmware/rtl_nic/.../git/firmware/linux-firmware.git/tree/i915/skl_guc_33.0.0.bin sudo wget https://git.kernel.org/pub/scm.../pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915/kbl_guc_33.0.0.bin sudo wget https://...git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915/kbl_guc_33.0.0.bin sudo....bin sudo wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915/
重要参数 参数名称 含义 Firmware state 磁盘状态 Firmware state: Online, Spun Up 磁盘正常 Firmware state: Unconfigured(good...), Spun Up 磁盘已安装，但未启用 Firmware state: Unconfigured(bad) 故障， 对应hwcheck的 Non-Critical Firmware state: Failed...Firmware state: Rebuild ......磁盘更换完成 $ MegaCli -PDList -aAll -NoLog | grep 'Firmware state' Firmware state: Online, Spun Up Firmware...state: Online, Spun Up Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware state
# /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL|grep Firmware Firmware state: Online, Spun Up Device...Firmware Level: DA07 Firmware state: Online, Spun Up Device Firmware Level: DA07 Firmware state: Online..., Spun Up Device Firmware Level: DA07 Firmware state: Online, Spun Up Device Firmware Level: DA07 Firmware...state: Unconfigured(bad) Device Firmware Level: DA07 Firmware state: Online, Spun Up Device Firmware...Level: DA07 Firmware state: Online, Spun Up Device Firmware Level: DA07 Firmware state: Online, Spun
ISP 包括逻辑部分以及运行在其上的firmware。...其中，firmware 的运转靠视频采集单元的中断驱动。PQ Tools 工具通过网口或者串口完成对ISP 的在线图像质量调节。...ISP 由ISP 逻辑及运行在其上的Firmware 组成，逻辑单元除了完成一部分算法处理外，还可以统计出当前图像的实时信息。...Firmware 通过获取ISP 逻辑的图像统计信息，重新计算，反馈控制lens、sensor 和ISP 逻辑，以达到自动调节图像质量的目的。...ISP firmware 架构如图1-2 所示。 不同的sensor 都以回调函数的形式，向ISP 算法库注册控制函数。
, Spun Up 磁盘正常 Firmware state: Unconfigured(good), Spun Up 磁盘已安装，但未启用 Firmware state: Unconfigured(bad...) 故障， 对应hwcheck的 Non-Critical Firmware state: Failed 故障， 对应hwcheck的Critical Firmware state: Rebuild 重建...Firmware state: Rebuild ......磁盘更换完成 $ MegaCli -PDList -aAll -NoLog | grep 'Firmware state' Firmware state: Online, Spun Up Firmware...state: Online, Spun Up Firmware state: Online, Spun Up Firmware state: Online, Spun Up Firmware state
MTK8516 开发过程中遇到了不少问题，记录下印象比较深刻的问题 /usr/bin/6620_launcher -p /lib/firmware 启动提示 [root@buildroot firmware...]# /usr/bin/6620_launcher -p /lib/firmware WARNING!!!...pwr on thread ok enter power on connsys flowpatch name pre-fix:ROMv2_lm_patch fwVersion:0x8a00 /lib/firmware...hdr.bin fw Ver in patch: 0x8a00 read patch info:0x21,0x00,0x0a,0xf0 gpatchnum = [2] gdwonseq = [1] /lib/firmware...Fail (-1) and retry Power on device node(/dev/wmtWifi) gWifiFd:4 Fail (-1) and retry 原因在于 : vendor/firmware
" 2>&1 | tee -a $log_file $petalinux_devtool modify arm-trusted-firmware 2>&1 | tee -a...$log_file echo -e "\nTry to modify fsbl-firmware" 2>&1 | tee -a $log_file $petalinux_devtool...modify fsbl-firmware 2>&1 | tee -a $log_file echo -e "\nTry to modify pmu-firmware" 2>...&1 | tee -a $log_file $petalinux_devtool modify pmu-firmware 2>&1 | tee -a $log_file echo...-e "\nTry to modify plm-firmware" 2>&1 | tee -a $log_file $petalinux_devtool modify plm-firmware
字节跳动 2021 年在英特尔、OCP-Open System Firmware 社区的支持下，全球首发的云固件 Cloud Firmware 1.0 成功地实现了服务器 LinuxBoot 产品化落地...以往客户需要事先拿到 Silicon Code，之后将其编译集成到整个 Firmware 代码库中。...从平台应用方面，Cloud Firmware1.0 应用在了 Whitley 平台上，而 Cloud Firmware 2.0 应用在了 Eagle Stream 平台上。...在 BootLoader 层面，从之前 EDK2 精简版的 MinPlatform（Cloud Firmware 1.0）切换到了 coreboot（Cloud Firmware 2.0）。...在 Cloud Firmware 1.0 的实践中，最重要的就是使得 LinuxBoot 这样一个开源方案达到了产品级别，在 Cloud Firmware 2.0 中直接复用了 Cloud Firmware
Thu Dec 10 19:00:00 CST [disk.fw.downrevWarning:warning]: 14 disks have downrev firmware that you need...Thu Dec 10 20:00:00 CST [disk.fw.downrevWarning:warning]: 14 disks have downrev firmware that you need...Thu Dec 10 21:00:00 CST [disk.fw.downrevWarning:warning]: 14 disks have downrev firmware that you need...Thu Dec 10 22:00:00 CST [disk.fw.downrevWarning:warning]: 14 disks have downrev firmware that you need...Thu Dec 10 23:00:00 CST [disk.fw.downrevWarning:warning]: 14 disks have downrev firmware that you need
加载固件 驱动位于 kernel/linux-4.9/drivers/remoteproc/sunxi_rproc_firmware.c 首先调用 sunxi_request_firmware 函数 int...sunxi_request_firmware(const struct firmware **fw, const char *name, struct device *dev) { int ret,...index; struct firmware *fw_p = NULL; u32 img_addr, img_len; ret = sunxi_find_firmware_storage();...对于Linux启动我们只需要放置于 lib/firmware 即可。...); i++) { path = firmware_storages[i].path; pos = firmware_storages[i].head_off; flag = firmware_storages
领取专属 10元无门槛券
手把手带您无忧上云
