INFO 24952 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 15980 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 14044 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 12304 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 25564 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated
GC"; case _heap_inspection: return "Heap Inspection Initiated GC"; case _heap_dump:...return "Heap Dump Initiated GC"; case _wb_young_gc: return "WhiteBox Initiated Young...GC"; case _wb_conc_mark: return "WhiteBox Initiated Concurrent Mark"; case _wb_full_gc...: return "WhiteBox Initiated Full GC"; case _no_gc: return "No GC"; case _allocation_failure...Concurrent Mode Failure：CMS GC 运行期间，Old 区所预留的空间不足以分配给新创建的对象，此时收集器会发生退化，甚至严重影响 GC 性能 5、GCLocker Initiated
TRAPS: Unlike the above commands which are initiated from the SNMP Manager, TRAPS are initiated by the...INFORM: This command is similar to the TRAP initiated by the Agent, additionally INFORM includes confirmation
this.enabled || (this.initiated && utils.eventType[e.type] !...== this.initiated) { return; } // ... var point = e.touches ?...e.touches[0] : e, pos; this.initiated = utils.eventType[e.type]; this.moved = false; initiated...属性在最开始肯定是没有的，而enabled默认是true，所以在最开始执行这个方法的时候是不会返回的，而是会给initiated这个属性设置当前的eventType值，这个值会在_move方法中用到。...== this.initiated ) { return; } 首先来进行类型判断，因为在_start方法中已经定义了这个值，所以这里也不会返回。
Stateless PCE 之后演进为Stateful PCE，其中Stateful PCE又分为Passive Stateful PCE和Active Stateful PCE 如今又进化为PCE-Initiated...LSP的路径和状态变更取决于PCE，从这里可以看出，Active Stateful PCE具备更强的控制器能力，与SDN的概念更加贴合了： [Active Stateful PCE交互示意] PCE-Initiated...因此PCE-Initiated提出了一种PCE-Initiated LSP，即不通过配置下发，而通过一个PCEP的消息创建RSVP-TE LSP，相关标准参考PCEP Extensions for PCE-Initiated...LSP Setup in a Stateful PCE Model： [PCE-Initiated LSP生命周期] PCEP其他扩展 Segment Routing扩展 支持SR-TE LSP，草案
重命名未链接到诊断服务知道其已创建的文件，因此唯一的要求是它们必须存在%WINDIR%\temp\DiagTrack_alternativeTrace并匹配WPR_initiated_DiagTrack...*.etl* 既然我们有权限在目标文件夹中创建的文件，我们现在可以创建WPR_initiated_DiagTrack0.etl，WPR_initiated_DiagTrack1.etl等，他们都将获得改名...创建符号链接\RPC Control\WPR_initiated_DiagTrack[0-100.]etl定位%WINDIR%\system32\phoneinfo.dll 打开OPLOCK WPR_initiated_DiagTrack100...如果没有，请重复创建WPR_initiated_DiagTrack[].etl文件和匹配的符号链接。...打开OPLOCK WPR_initiated_DiagTrack0.etl; 当它损坏时，我们知道重命名流程已经开始，但是第一次重命名操作尚未发生。
根据PPPoE会话的起点所在位置的不同，PPPoE分为 Router-Initiated和 Host-Initiated两种组网结构。...Router-Initiated组网结构 如图1 所示，Router-Initiated 组网结构是在两台路由器之间建立PPPoE 会话，所有主机通过同一 个 PPPoE会话传送数据，主机上不用安装 PPPoE...图1 Router-Initiated组网结构图 Host-Initiated组网结构 如图 2所示，Host-Initiated组网结构是将PPPoE会话建立在 Host和运营商的路由器之间，为每一...图2 Host-Initiated组网结构图 PPPoE报文 PPPoE报文格式 如图3所示，PPPoE报文的格式是在以太网帧中携带 PPP报文。
INFO 23036 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 3000 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 9828 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 23248 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...INFO 11976 --- [ionShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated
Incoming LSASS NetworkConnect” groupRelation=“and”> lsass.exe false Splunk查询语句如下： index=sysmon RuleName=”Incoming LSASS NetworkConnect...” | table Protocol,Initiated,SourceIp,DestinationIp 结果如下： 我们可以看到，主机192.168.1.43就是我们的攻击设备，它向192.168.1.156
jvmti_force_gc: return "JvmtiEnv ForceGarbageCollection"; case _gc_locker: return "GCLocker Initiated...GC"; case _heap_inspection: return "Heap Inspection Initiated GC"; case _heap_dump:...return "Heap Dump Initiated GC"; case _wb_young_gc: return "WhiteBox Initiated Young...GC"; case _wb_conc_mark: return "WhiteBox Initiated Concurrent Mark"; case _wb_full_gc...: return "WhiteBox Initiated Full GC"; case _update_allocation_context_stats_inc: case
'initing iterator') list_1 = [i for i in range(100000000)] show_memory_info('after iterator initiated...initing generator') list_2 = (i for i in range(100000000)) show_memory_info('after generator initiated...test_generator() ########## 输出 ########## initing iterator memory used: 48.9765625 MB after iterator initiated...memory used: 3920.3046875 MB Wall time: 17 s initing generator memory used: 50.359375 MB after generator initiated
地址：https://www.leagsoft.com/doc/article/103107.html
Linux) Kali linux: 10.10.16.44 Information Enumeration Firstly, detect the open ports: # Nmap 7.70 scan initiated...Then, detect the service of the port 80, it may be a kind of http service. # Nmap 7.70 scan initiated
这几个处理方法内都调用了onMouse方法： // ... let initiated = false let eventTarget function onMouse(mouseEvent, touchType...mousedown = true（mousedown事件） // false（mouseup事件） // 保持（mousemove事件） initiated...false : initiated // 如果是鼠标移动事件且鼠标没有按下则返回 if (isMousemove(type) && !...initiated) return // 判断是否要更新事件目标 if (isUpdateTarget(type)) eventTarget = target // 手动构造对应的touch...这个方法首先根据鼠标事件的类型设置了initiated变量，记录鼠标的按下状态，如果是鼠标移动事件且鼠标没有按下，那么个方法会直接返回，因为touch事件都需要先按下才会触发，然后调用了isUpdateTarget
initiated) { CalendarDate today = new CalendarDate(); calendarAdapter.notifyDataChanged(today...); initiated = true; } } Download Gradle: Step 1.
services in China, today announced that it has joined the GPL Cooperation Commitment (see full text below) initiated...legal proceeding or claim that Tencent brings against you in response to a prior proceeding or claim initiated
concurrent-cleanup-end, 0.0004378 secs] 2018-01-18T16:41:34.158+0800: 7924.700: [GC pause (GCLocker Initiated...Times: user=0.23 sys=0.00, real=0.08 secs] 2018-01-18T16:41:34.658+0800: 7925.199: [GC pause (GCLocker Initiated...Times: user=0.18 sys=0.00, real=0.07 secs] 2018-01-18T16:41:35.188+0800: 7925.729: [GC pause (GCLocker Initiated...0800: 7926.698: [GC concurrent-mark-start] 2018-01-18T16:41:36.670+0800: 7927.211: [GC pause (GCLocker Initiated...concurrent-cleanup-end, 0.0010701 secs] 2018-01-18T16:41:43.659+0800: 7934.200: [GC pause (GCLocker Initiated
The credentials mode of requests initiated by the XMLHttpRequest is controlled by the withCredentials
The credentials mode of requests initiated by the XMLHttpRequest is controlled by the withCredentials...The credentials mode of requests initiated by the XMLHttpRequest is controlled by the withCredentials
When an active-mode data transfer is initiated by the FTP client, the server opens a connection from...被动连接 passive mode Passive mode, like active mode, is initiated by the FTP client application.
领取专属 10元无门槛券
手把手带您无忧上云
