原文链接:https://rumenz.com/rumenbiji/linux-route.html
你应该意识到你的默认网关是你的路由器的 IP 地址。一般这是在安装过程中由操作系统自动检测的,如果没有,你可能需要改变它。如果你的系统不能 ping 自身,那么很可能是一个网关问题,你必须修复它。在网络中,当你有多个网络适配器或路由器时,这种情况可能会发生。
要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在 Linux 系统中,设置路由通常是为了解决以下问题:该 Linux 系统在一个局域网中,局域网中有一个网关,能够让机器访问 Internet,那么就需要将这台机器的 IP 地址设置为 Linux 机器的默认路由。
发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/161124.html原文链接:https://javaforall.cn
本章将介绍路由的通信原理,主旨是让大家理解路由的过程,而实验是次要的。在实际生产环境中,都使用的是企业级路由器,不会使用windows或Linux主机做路由用,所以读者应该把握好学习重点,更多的去思考通信原理。
traceroute路由跟踪是利用IP数据包的TTL值来实现的,Linux 下 traceroute 首先发出 TTL = 1 的UDP 数据包,第一个路由器将 TTL 减 1 得 0 后就不再继续转发此数据包,而是返回一个 ICMP 超时报文,traceroute 从超时报文中即可提取出数据包所经过的第一个网关的 IP 地址。然后又发送了一个 TTL = 2 的 UDP 数据包,由此可获得第二个网关的 IP 地址。依次递增 TTL 便获得了沿途所有网关的 IP 地址。
route命令用来显示并设置Linux内核中的网络路由表,route命令设置的路由主要是静态路由。实现两个不同子网之间的通信,需要一台连接两个网络的路由器,或者同事位于两个网络的网关来实现。
常见的上网外设有有线以太网、WIFI、4G/5G等接口,一块硬件主板经常会搭载多种网络访问硬件资源。如何配置不同网络外设的使用优先级呢?本文将为您介绍Linux系统下的常用配置方法。
常见的上网外设有以太网、WIFI、4G/5G等接口,一块硬件主板经常会搭载多种网络访问硬件资源。如何配置不同网络外设的使用优先级呢?本文将为您介绍Linux系统下的常用配置方法。
在 Linux 系统中,路由是网络通信的关键组件之一。通过添加路由,您可以指定数据包在网络中的传输路径,从而实现网络连接和数据转发。本文将详细介绍如何在 Linux 上添加路由,以便您可以根据需要配置网络路由并实现灵活的网络连接。
大家好,又见面了,我是你们的朋友全栈君。 Linux如何添加路由 a.如何使用命令给Linux添加一个默认网关? 缺省网关路由: 默认网关就是数据包不匹配任何的路由规则,最后流经的地址关口!网关按字面意思就是网络的关口 ,就相当于我们办公室的大门一样,大家上班就要经过办公室的门一样。 使用route -n 查看网关信息,或者 netstat -rn查看路由 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 如何删除路由表: [root@machine1 ~]# route del default gw 192.168.0.1 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 配置方法: 1、setup 2、配置网卡配置文件:/etc/sysconfig/network-scripts/ifcfg-eth0 关键字:GATEWAY=192.168.0. 重启网卡配置生效 3、route add default gw 192.168.0.1 #(临时生效) [root@machine1 ~]# route add default gw 192.168.0.1 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 如何添加网络路由? b.网络路由:即去往某个网段的路由 一般多个网段之间相互通信,希望建立一条优先的路由,而不是通过默认的网关。拿家里来说, 你要去卫生间有卫生间的门,去卧室有卧室的门。这两个门就是网络路由了。家里的大门呢,就是 默认路由。
//添加到主机的路由# route add –host 192.168.1.11 dev eth0
一:使用 route 命令添加 使用route 命令添加的路由,机器重启或者网卡重启后路由就失效了,方法: //添加到主机的路由
容器是一种新的虚拟化技术,每一个容器都是一个逻辑上独立的网络环境。Linux 上提供了软件虚拟出来的二层交换机 Bridge 可以解决同一个宿主机上多个容器之间互连的问题,但这是不够的。二层交换无法解决容器和宿主机外部网络的互通。
路由的过程意味着IP包在网络上从一点传输到另一点。当你向某人发送电子邮件时,你实际上是在将一系列IP数据包或数据报从你的系统传输到另一个人的计算机上。从计算机发送的数据包通过几个网关或路由器到达目标计算机系统。同样的方法适用于所有internet协议,如HTTP、IRC和FTP等。
在Linux下网卡接口逻辑名被称为eth0,eth1,eth2,.....,ethN,所有网卡接口的配置文件都存储在/etc/sysconfig/network-scripts/下,文件名是以ifcfg-eth0,ifcfg-eth1,ifcfg-eth2,....,ifcfg-ethN形式来命名的。一个网卡接口对应一个配置文件。如果我们要给某个网卡接口配置两个IP地址,我们该怎么办呢?
route 命令用于显示和操作IP路由表。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在Linux系统中,设置路由通常是 为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置为 Linux机器的默认路由。要注意的是,直接在命令行下执行route命令来添加路由,不会永久保存,当网卡重启或者机器重启之后,该路由就失效了;要想永久保存,有如下方法:
要用到的命令是 route route 命令 显示和设置Linux路由表 -A:设置地址类型; -C:打印将Linux核心的路由缓存; -v:详细信息模式; -n:不执行DNS反向查找,直接显示数字形式的IP地址; -e:netstat格式显示路由表; -net:到一个网络的路由表; -host:到一个主机的路由表。 Add:增加指定的路由记录; Del:删除指定的路由记录; Target:目的网络或目的主机; gw:设置默认网关; mss:设置TCP的最大区块长度(MSS),单位MB; windo
BOOTPROTO = static,表示启用了静态 IP 地址,默认为 none
Linux下路由配置命令 1.添加主机路由 route add -host 192.168.1.11 dev eth0route add -host 192.168.1.12 gw 192.168.1.1 2.添加网络路由 route add -net 192.168.1.11 netmask 255.255.255.0 eth0route add -net 192.168.1.11 netmask 255.255.255.0 gw 192.168.1.1route add -net 192.168.1.0
2016年08月07日 11:25:58 xingpacer 阅读数:43344更多
route add -net 172.16.6.0 netmask 255.255.255.0 gw 172.16.2.254 dev eth0
这个参数通常需要在高负载的访问服务器上增加。比如繁忙的网络(或网关/防火墙 Linux 服务器),再比如集群规模大,node 和 pod 数量超多,往往需要增加内核的内部 ARP 缓存大小。
ip 命令是一个新的网络命令行实用程序,用于在 Linux 系统上为网络接口分配 IP 地址或配置/更新网络配置。 它是 iproute2 软件包的一部分,并提供多项网络管理任务,例如打开或关闭网络接口、分配和删除 IP 地址和路由、管理 ARP 缓存等等。 ip命令与旧的ifconfig 命令非常相似,但它的功能要强大得多,添加了更多的功能和能力。 如何配置静态 IP 地址 Internet 协议 (IPv4) 要在 Linux 中配置静态 IP 地址, 你需要更新或编辑网络配置文件以将静态 IP 地址分
route 命令用来显示并设置 Linux 内核中的网络路由表,route 命令设置的路由主要是静态路由。在 Linux、BSD 和其他类似 Unix 的系统上,route 命令用于查看和更改内核路由表。在不同的系统上,命令语法不同。
a.如何用命令行方式给linux机器添加一个默认网关,假设网关地址为10.0.0.254?
Linux网络基本网络配置方法介绍 网络信息查看 设置网络地址: cat /etc/sysconfig/network-scripts/ifcfg-eth0 你将会看到: DEVICE=eth0 BOOTPROTO=statics HWADDR=00:0C:29:13:D1:6F ONBOOT=yes TYPE=Ethernet IPADDR=192.168.0.212 NETMASK=255.255.255.0 BOOTPROTO=statics :表示使用静太IP地址。 ONBOOT=y
Ping 是Windows自带的一个DOS命令。利用它可以检查网络是否能够连通,用好它可以很好地帮助我们分析判定网络故障。该命令可以加许多参数使用,键入Ping按回车即可看到详细说明。Ping 命令可以用来验证与远程计算机的连接。
本实验的背景是笔者在实践中遇到过的一个问题,本实验尽量还原当时的网络环境。仅当做一份笔记,同时分享给遇到此问题的同学。
route命令用于显示和操作IP路由表。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在Linux系统中,设置路由通常是 为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置为 Linux机器的默认路由。要注意的是,直接在命令行下执行route命令来添加路由,不会永久保存,当网卡重启或者机器重启之后,该路由就失效了;要想永久保存,有如下方法:
Linux系统的route命令用于显示和操作IP路由表(show / manipulate the IP routing table)。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在Linux系统中,设置路由通常是为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置为Linux机器的默认路由。要注意的是,直接在命令行下执行route命令来添加路由,不会永久保存,当网卡重启或者机器重启之后,该路由就失效了;可以在/etc/rc.local中添加route命令来保证该路由设置永久有效。
转载:https://www.kancloud.cn/chunyu/php_basic_knowledge/2106519
traceroute命令尝试跟踪IP数据包到某个Internet主机的路由,方法是使用一个小ttl(生存时间)启动探测数据包,然后侦听来自网关的ICMP超时回复,它以ttl为1开始探测,并将其增加1,直到获得ICMP port unreachable或TCP reset,这意味着我们到达了host,或达到了最大值(默认为30跳),在每个ttl设置处发送三个探测(默认),并打印一行,显示ttl、网关地址和每个探测的往返时间,在请求时,地址后面可以有附加信息,如果探测结果来自不同的网关,则会打印每个响应系统的地址,如果在5.0秒内(默认值)没有响应,则会为该探测器打印一个*。
因为有客户的服务器有4个网卡,他要实现4个网卡分别对应联通专线,电信专线,移动专线,内网通讯同时生效,但是Linux系统默认网卡配置IP只会默认生效一个默认网关,多网关同时生效的话就需要写路由策略才可以同时生效,下面就这个情况写一篇教程,非常简单
网卡命名规则受biosdevname和net.ifnames两个参数影响 如果你的网卡名不是eth0怎么设置为eth0呢?
基于策略的路由比传统路由在功能上更强大,使用更灵活,它使网络管理员不仅能够根据目的地址而且能够根据报文大小、应用或IP源地址等属性来选择转发路径。
linux下添加路由的方法 一、查看及添加临时路由 1.查看路由(linux下) [root@nfs ~]# route #同netstat -rn Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.90.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.80.0 * 255.255.255.0 U 0 0 0 eth0 192.168.10.0 * 255.255.255.0 U 0 0 0 eth1 192.168.90.0 192.168.90.2 255.255.255.0 UG 0 0 0 tun0 link-local * 255.255.0.0 U 1002 0 0 eth0 link-local * 255.255.0.0 U 1003 0 0 eth1 default 192.168.80.2 0.0.0.0 UG 0 0 0 eth0 注:windows查看路由命令:route print或netstat -rn 输出结果中各个字段的含义是: Destination表示路由的目标IP地址 Gateway表示网关使用的主机名或者是IP地址。上面输出的”*”表示没有网关。 Genmask表示路由的网络掩码 Flags是表示路由的标志。可用的标志及其意义是:U表示路由在启动,H表示target是一台主机,G表示使用网关,R表示对动态路由进行复位设置;D表示动态安装路由,M表示修改路由,!表示拒绝路由 Metric表示路由的单位开销量 Ref表示依赖本路由现状的其它路由数目 Use表示路由表条目被使用的数目 Iface表示路由所发送的包的目的网络 2.使用 route 命令添加 使用route 命令添加的路由,机器重启或者网卡重启后路由就失效了 方法: 添加到主机的路由 route add -host 192.168.168.110 dev eth0 route add -host 192.168.168.119 gw 192.168.168.1 添加到网络的路由 route add -net IP netmask MASK eth0 route add -net IP netmask MASK gw IP route add -net IP/24 eth1 添加默认网关 route add default gw IP 删除路由 route del -host 192.168.168.110 dev eth0 3.使用ip route添加路由 添加路由 ip route add 192.168.0.0/24 via 192.168.0.1 ip route add 192.168.1.1 dev 192.168.0.1 删除路由 ip route del 192.168.0.0/24 via 192.168.0.1 二、在linux下设置永久路由的方法: 1.在/etc/rc.local里添加 route add -net 192.168.3.0/24 dev eth0 route add -net 192.168.2.0/24 gw 192.168.3.254 2.在/etc/sysconfig/network里添加到末尾 方法:GATEWAY=gw-ip 或者 GATEWAY=gw-dev 3./etc/sysconfig/static-router : 这个是network脚本执行时调用的一个文件 any net x.x.x.x/24 gw y.y.y.y any net 192.168.3.0/24 gw 192.168.3.254 any net 10.250.228.128 netmask 255.255.255.192 gw 10.250.228.129 4.创建名为route- eth0的文件 vi /etc/sysconfig/network-script/route-eth0 在此文件添加如下格式的内容 192.168.1.0/24 via 192.168.0.1 5.查看经过的路由 linux查看经过的路由traceroute www.baidu.com windows查看经过的路由tracert -d www.baidu.com 三、开启 IP 转发: echo “1” >/proc/sys/net/ipv4/ip_forward (临时) vi /etc/sysctl.conf –> net.ipv4.ip_forward=1 (永久开启)
route add -net 192.168.0.0/24 gw 192.168.0.1
linux下静态路由修改命令 方法一: 添加路由 route add -net 192.168.0.0/24 gw 192.168.0.1 route add -host 192.168.1.1 dev 192.168.0.1 删除路由 route del -net 192.168.0.0/24 gw 192.168.0.1
手动修改配置文件 ,设置对应网口的 IP 等信息。配置文件路径/etc/sysconfig/network-scripts/* 手动修改配置文件 ,设置对应网口的 IP 等信息。配置文件路径 /etc/sysconfig/network-scripts/* 最小设置示例 文件名对应网口名,CentOS 8 默认配置文件 [Linux]# vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BROADCA
在计算机网络中,路由器是负责转发网络流量的设备,当数据报到达路由器时,路由器必须确定将其路由到目的地的最佳方法,route命令用于查看和更改内核路由表,在不同的系统上,命令语法不同,所以实际时可以查看命令的帮助来确定具体使用方法。
折腾了半天,原始出处不知道了,转记一下。 比如如果一个linux服务器有三个口接三个不同的网络,假设对应的网络信息是如此 eth0是电信,ip地址为1.1.1.1/24,电信网关为1.1.1.254 eth1是网通,ip地址为2.2.2.2/24,网通网关为2.2.2.254 eth2是教育网,ip地址为3.3.3.3/24,教育网网关为3.3.3.254 传统情况下,如果是为了从内向外访问获得更好的速度,让访问电信走电信,访问网通走网通,那么配置是网关只能够配置一个。 比如以电信为主的,那么网关就只设置电
传统情况下,如果是为了从内向外访问获得更好的速度,让访问电信走电信,访问网通走网通,那么配置是网关只能够配置一个。
ping的错误回显的内容与icmp的差错消息相关的,根据回显报错的节点ip和内容,我们能知道那个节点出现问题,什么问题?
# route add –host 11.11.1.11 gw 11.11.1.1
ip route 指令对路由的修改不能保存,重启就没了。把 ip route 指令写到 /etc/rc.local 也是徒劳的。
领取专属 10元无门槛券
手把手带您无忧上云