CPU:E5 2677 v3 核心:24 内存:128G 硬盘:8T 线程:单核双线程
Hadoop,zookeeper,HBase,Spark集群环境搭建【面试+工作】
看了很多资料介绍如何将python移植到嵌入式设备当中,但总感觉杂乱五章,还移植不成功,但是经过我的多方摸索,成功的探索出了一条阳光大道,供各位网友借鉴参考。
维护Arch Linux安装其实非常简单直接,只要你记住一些事情。 分发的滚动版本意味着我们不必担心像其他发行版(Ubuntu和Debian等等)的主要版本升级。 只要您明智地使用Pacman并定期更新您的软件包,您就不应该遇到任何破坏的问题,而不能使用Arch的软件包。 以下将概述我的建议,以保持Arch更新和运行,就像您安装的那一天,或更好! 我也将提供一个简短的部分来优化Arch,首先安装它将使维护更快,更容易长期。 和往常一样,这些只是我的想法,在使用Arch时应该引用任何官方文档。 我假设你是所有以下命令的sudoer。 但是,只要您是sudoer或可以更改为root用户,您应该可以。 ArchWiki是一个很好的资源,很多指南和信息都是有用的,即使你没有使用Arch。 他们的IRC频道#archlinux可以在irc.freenode.net上找到 。 这是另一个很好的地方提出问题,并从更有经验的用户收集有用的见解。 只要不要洪水通道,不断地一遍又一遍地问同一个问题!
注意:此步骤先要点击自定义硬件,选择安装CentOS7镜像文件(即IOS文件)的位置。
从下面的网盘地址 或者 360 软件管家搜索 VMware Workstation 都可下载:
服务是一些特定的进程,自有服务就是系统开机后就自动运行的一些进程,一旦客户发出请求,这些进程就自动为他们提供服务,windows系统中,把这些自动运行的进程,称为"服务"。
NTP升级,升级RedHat时很顺利,升级完成后会默认覆盖掉原有文件,重启服务后,使用ntpd --version查看验证上即可,可在升级SUSE Linux时却发现错误频频,以下是我再升级时遇到的一些问题,小结之后希望有和我遇到同样错误的亲们可以作为参考:
此方案为暂定方案,有可能会变更。如果直接使用CDH会更加方便,但是如果进行自行配置,需要做实验。
当集群中各个节点的时间不同步,误差超过某个范围时,会导致一些集群的服务无法正常进行,这时我们应该想办法做一个定时同步集群所有节点时间的任务。
9月某天日晚,阿里云后台报告有一台服务器在异地登录的告警,初步怀疑是被***了,临时采取关闭这台服务器的方法避免对集群中的其他主机造成危害。
在 RHEL 7 发布时隔五年后Red Hat Enterprise Linux 8 正式发布,不得不感慨五年前搬砖的我五年后依旧不忘初心继续搬砖。。。
提供全球可用NTP服务器列表,挑选适合自己(通常为物理位置附近)的NTP服务器。如:cn.ntp.org.cn。
下载地址:http://archive.cloudera.com/cm5/repo-as-tarball/5.7.0/cm5.7.0-centos7.tar.gz
ldconfig通常在系统启动时运行,而当用户安装了一个新的动态链接库时,就需要手工运行这个命令。
EVE-NG(全称EmulatedVirtual Environment),这款模拟器已经不仅可以模拟网络设备,也可以运行一切虚拟机。理论上,只要能将虚拟机的虚拟磁盘格式转换为qcow2都可以在EVE-NG上运行。所以,EVE-NG可以算打造成最佳的网络安全攻防虚拟环境。
1. 配置的每个discovery任务在一定时间内占用1个discovery进程,而zabbix_server.conf中默认配置只有1个discovery(被注释,默认生效);
如果是新手,请严格按照步骤来做。当然还有其他安装方式,这里讲的方式比较适合测试使用。
原因很简单,ntpd是步进式的逐渐调整时间,而ntpdate是断点更新,比如现在服务器时间是9.18分,而标准时间是9.28分,ntpd会在一段时间内逐渐的把时间校准到与标准时间相同,而ntpdate会立刻把时间调整到9.28分,如果你往数据库内写入内容或在其他对时间有严格要求的生产环境下,产生的后果会是很严重的。(注:当本地时间与标准时间相差30分钟以上是ntpd会停止工作)
如何保持正确的时间,如何使用 NTP 和 systemd 让你的计算机在不滥用时间服务器的前提下保持同步。
NTP网络时间服务器在LINUX系统设置方法(小红帽版) NTP网络时间服务器在LINUX系统设置方法(小红帽版) 第一种方法: 1.Linux系统使用命令行配置: 在Linux 上面执行 ntpdate: ntpdate 1Array2.168.0.1 #1Array2.168.0.1是NTP服务器的IP 2.使用hwclock命令,把时间写入bios hwclock -w 如果想定时进行时间校准,可以使用crond服务来定时执行。 编辑 /etc/crontab 文件 加入下面一行: 30 8 * * * root /usr/sbin/ntpdate 1Array2.168.0.1; /sbin/hwclock -w #1Array2.168.0.1是NTP服务器的IP地址 然后重启crond服务 service crond restart 这样,每天 8:30 Linux 系统就会自动的进行网络时间校准。
1、进入客户端机器Linux系统,我们介绍两种进入Linux系统的方法,并使用shell进行配置:
如何保持正确的时间,如何使用 NTP 和 systemd 让你的计算机在不滥用时间服务器的前提下保持同步。下面话不多说了,来一起看看详细的介绍吧。
让 Linux 来告诉你时间的时候,它是很奇怪的。你可能认为是使用 time 命令来告诉你时间,其实并不是,因为 time 只是一个测量一个进程运行了多少时间的计时器。为得到时间,你需要运行的是 date 命令,你想查看更多的日期,你可以运行 cal 命令。文件上的时间戳也是一个容易混淆的地方,因为根据你的发行版默认情况不同,它一般有两种不同的显示方法。下面是来自 Ubuntu 16.04 LTS 的示例:
你也许听说过这个词很多次或者你可能已经在使用它了。在这篇文章中我将会清晰的告诉你 NTP 服务器和客户端的安装。
以前只在linux上配置J2EE项目执行环境,无非配置下jdk,部署tomcat,再通过docker或者jenkins自动部署上去
在 Windwos 中,系统时间的设置很简单,界面操作,通俗易懂,而且设置后,重启,关机都没关系。系统时间会自动保存在 BIOS 时钟里面,启动计算机的时候,系统会自动在 BIOS 里面取硬件时间,以保证时间的不间断。但在 Linux 下,默认情况下,系统时间和硬件时间并不会自动同步。在 Linux 运行过程中,系统时间和硬件时间以异步的方式运行,互不干扰。硬件时间的运行,是靠 BIOS 电池来维持,而系统时间,是用 CPU Tick 来维持的。在系统开机的时候,会自动从 BIOS 中取得硬件时间,设置为系统时间。
mongodb生产部署文档,继上一篇mongodb-4.x shard cluster 搭建-复制集节点为单个节点-适合开发环境后。本文主要记录了生产环境mongodb-shard集群部署的步骤与方法,提供快速安全搭建生产集群的配置。本文使用的mongodb版本为4.2,部署环境为centos7。
VMWare11安装RedHat Linux 7过程中会碰到一些坑,这里列举一些。
最重要的公共服务之一就是报时timekeeping,但是很多人并没有意识到这一点。大多数公共时间服务器都是由志愿者管理,以满足不断增长的需求。这里学习一下如何运行你自己的时间服务器,为基础公共利益做贡献。(查看 在 Linux 上使用 NTP 保持精确时间 去学习如何设置一台局域网时间服务器)
Google Chrome是一款由Google公司开发的网页浏览器,该浏览器基于其他开源软件撰写,包括WebKit,目标是提升稳定性、速度和安全性,并创造出简单且有效率的使用者界面。
搭建私有云时需要制作一些操作系统的基础镜像,这里也有一些持巧,在这里记录下来以备忘。 安装CentOS6操作系统 这里没有太多好说的,我是从这里下载最小安装ISO进行安装的,安装的硬盘大小为20G。安装时大部分选项都是默认的,只有分区采用了自定义分区方案,200M的boot分区,其它全部作为根分区。如果需要交换分区,以后可以使用文件分区,使用文件分区的操作方法如下: dd if=/dev/zero of=/swapfile bs=1G count=2 chmod 600 /swapfile mkswap -
公司领导反馈:无权限登录系统,临近下班无奈只能吃过晚饭后回工位排查问题,一直排查到20:30多无法查出问题根源。
在调节NTP时间的时候,请保证123端口畅通,或者未被占用(使用netstat -n命令查看)。 假设时间服务器的地址如下: Time Server Address: Primary:192.168.1.254 Standby:192.168.1.253
Ansible命令行执行方式有:Ad-Hoc、Ansible-playbook两种,Web方式其官方提供付费产品Tower。Ad-Hoc主要用于临时命令的执行,Ansible-playbook相当于Ad-Hoc的集合,通过一定的规则编排在一起执行。
export PATH=$PATH:$JAVA_HOME/bin:$JAVA_HOME/sbin
安装Oracle 11g RAC时,我们需要配置ntp服务。在使用虚拟机的情况下对于时钟同步方式的配置有很多种方式,可以使用vmware自带的时钟同步功能,也可以直接将本地的一个节点用作时间服务器。本文介绍直接配置ntp方式的时钟服务器。
网络时间服务器为防火墙内的网络设备、终端、服务器提供准确、可靠和安全的高精度卫星时间参考,可为它支持数万台支持标准的网络时间协议(NTP,含V1/2/3/4)和简单网络时间协议(SNTP)的客户端进行时间同步。NTP网络时间服务器已广泛应用于金融、交通、证券、电力、移动通信、石油、工业、电子商务、工业自动化、云计算、安防、智慧城市、物联网、能源、国防等各领域。
在linux里设置NTP服务并不难,但是NTP本身确是一个很复杂的协议. 你都了解细节么?
(一)准备工作 1、准备几台机器 10.1.51.100 ambariserver 本地mirrorserver及ambari server都在这一台机器 10.1.51.10 master 10.1.51.11 slave1 10.1.51.12 slave2 2、都创建管理用户hadoop 3、做ssh免密码登录(ambariserver到其他机器的,hadoop用户) ssh-keygen cd .ssh cat id_rsa.pub >> authorized_keys chmod 700 ~/.ssh chmod 600 ~/.ssh/authorized_keys 注意,免密码一定要互相登陆一次,让他记住密码 4、设置sudo免密码(hadoop用户)---后续所有操作都在hadoop用户下去做 在各节点上进入root: visudo 加入如下内容: hadoop ALL=(ALL) NOPASSWD: ALL 5、Maximum Open File Descriptors(10000) 检查语句 ulimit -Sn ulimit -Hn sudo vi /etc/security/limits.conf @hadoop soft nproc 262144 @hadoop hard nproc 262144 @hadoop soft nofile 262144 @hadoop hard nofile 262144 sudo vi /etc/security/limits.d/90-nproc.conf @hadoop soft nproc 262144 以上改动重启才能生效,最好同时执行ulimit -u 10240 命令,是其立即生效。(ulimit 命令很多啊) 6、Check Existing Package Versions 7、Set up Service User Accounts(设置服务用户账户) http://docs.hortonworks.com/HDPDocuments/Ambari-2.0.0.0/Ambari_Doc_Suite/ADS_v200.html#ref-70627b43-7d78-4cbb-8df8-e3f43cbd8422 hdp的各个服务运行在不同的linux账户下,如果你创建了这些账户,ambari就会直接用,否则他会自动创建,但是自动创建的用户不知道密码是什么,但是还是可以 sudo su hdfs进入到这些用户下,不过这样就不方便了。 比较好的办法是自己创建的账户,使用ambari安装组件时选择自定义账户即可(UID >= 1000)。 8、Enable NTP on the Cluster and on the Browser Host 集群各节点,包括安装ambari webui的机器都得开启ntp服务已同步时间,如果有条件,局域网应该有ntp服务器 To check that the NTP service is on, run the following command on each host:chkconfig --list ntpd To set the NTP service to start on reboot, run the following command on each host:chkconfig ntpd on To turn on the NTP service, run the following command on each host:service ntpd start 9、Check DNS(可以选择10) 集群所有机器必须配置正向和反向DNS,如果条件不允许,就设置/etc/hosts文件,每个节点都得改 10、/etc/hosts 1.2.3.4 <fully.qualified.domain.name> //一行一个 注意:这两行千万不要删除 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 vi /etc/sysconfig/network NETWORKING=yesNETWORKING_IPV6=yes HOSTNAME=<fully.qualified.domain.name> 11、关闭防火墙 12、Disable SELinux and PackageKit and check the umask Value set SELINUX=disabled in /etc/selinux/config sudo vi /etc/yum/pluginconf.d/refresh-packagekit.conf 设置:enabled=0 Ambari supports a umask value
在linux系统中,为了避免主机时间因为长时间运行下所导致的时间偏差,进行时间同步(synchronize)的工作是非常必要的。linux系统下,一般使用ntp服务来同步不同机器的时间。NTP是网络时间协议(Network Time Protocol)的简称,就是通过网络协议使计算机之间的时间同步化。 安装NTP包 检查是否安装了ntp相关包。如果安装ntp相关包,使用rpm或者yum安装,非常简单。 [root@localhost ~]# rpm -qa |grep ntp fontpackages-f
NTP服务器【Network Time Protocol(NTP】是用来使计算机时间同步化的一种协议,NTP服务器可以对其它服务器做时间同步化,从而达到时间统一。
cat > /etc/yum.repos.d/docker-main.repo << -'EOF' [docker-main-repo] name=Docker main Repository baseurl=https://yum.dockerproject.org/repo/main/centos/7 enabled=1 gpgcheck=1 gpgkey=https://yum.dockerproject.org/gpg -EOF
NTP是网络时间协议(Network Time Protocol),它是用来同步网络中各个计算机的时间的协议。它的用途是把计算机的时钟同步到世界协调时UTC,其精度在局域网内可达0.1ms,在互联网上绝大多数的地方其精度可以达到1-50ms。
DDOS的全称是Distributed Denial of Service,即"分布式拒绝服务攻击",是指击者利用大量“肉鸡”对攻击目标发动大量的正常或非正常请求、耗尽目标主机资源或网络资源,从而使被攻击的主机不能为合法用户提供服务。 DDOS攻击的本质是: 利用木桶原理,寻找利用系统应用的瓶颈;阻塞和耗尽;当前问题:用户的带宽小于攻击的规模,噪声访问带宽成为木桶的短板。 可以参考下面的例子理解下DDOS攻击。 1)某饭店可以容纳100人同时就餐,某日有个商家恶意竞争,雇佣了200人来这个饭店坐着不吃不喝,
领取专属 10元无门槛券
手把手带您无忧上云