route命令用于显示和操作IP路由表。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。windows环境下route命令常用于多网卡终端,默认路由指向连接访问互联网的网卡,静态路由指向内网网卡。
route add命令的主要作用是添加静态路由,通常的格式是: route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1 METRIC 3 IF 2 参数含义:^destination ^mask ^gateway metric^ ^interface
ip 命令是一个新的网络命令行实用程序,用于在 Linux 系统上为网络接口分配 IP 地址或配置/更新网络配置。 它是 iproute2 软件包的一部分,并提供多项网络管理任务,例如打开或关闭网络接口、分配和删除 IP 地址和路由、管理 ARP 缓存等等。 ip命令与旧的ifconfig 命令非常相似,但它的功能要强大得多,添加了更多的功能和能力。 如何配置静态 IP 地址 Internet 协议 (IPv4) 要在 Linux 中配置静态 IP 地址, 你需要更新或编辑网络配置文件以将静态 IP 地址分
在日常运维作业中,经常会碰到路由表的操作。下面就linux运维中的路由操作做一梳理: ------------------------------------------------------------------------------ 先说一些关于路由的基础知识: 1)路由概念 路由: 跨越从源主机到目标主机的一个互联网络来转发数据包的过程 路由器:能够将数据包转发到正确的目的地,并在转发过程中选择最佳路径的设备 路由表:在路由器中维护的路由条目,路由器根据路由表做路径选择 直连路由:当在路由器
ip route 指令对路由的修改不能保存,重启就没了。把 ip route 指令写到 /etc/rc.local 也是徒劳的。
一:使用 route 命令添加 使用route 命令添加的路由,机器重启或者网卡重启后路由就失效了,方法: //添加到主机的路由
KVM是指基于Linux内核(Kernel-based)的虚拟机(Virtual Machine)。KVM最大的好处就在于它是与Linux内核集成的,所以速度很快。
BOOTPROTO = static,表示启用了静态 IP 地址,默认为 none
以上的命令设置路由,重启network服务或系统后即会失效,为了能够每次重启都能够自动写入路由信息,需要编写配置文件:
1)ens33:10.20.10.93/23是外网网卡,也是默认网卡,网关10.20.10.1
//添加到主机的路由# route add –host 192.168.1.11 dev eth0
route -a -p 10.113.70.240 mask 255.255.255.240
学习了ip协议,知道怎么判断两台机器是否在同一个子网。如果它们不在一个子网,不同网段的机器,要如何实现通信呢?
本章将介绍路由的通信原理,主旨是让大家理解路由的过程,而实验是次要的。在实际生产环境中,都使用的是企业级路由器,不会使用windows或Linux主机做路由用,所以读者应该把握好学习重点,更多的去思考通信原理。
静态路由使用的原因多种多样,当没有到目的IP地址的动态路由时经常使用静态路由,或者用于覆盖动态获知的路由。
今天把Linux的网络配置总结了一下,尽管并不难可是是个比較重要的基础。然后我也不知到自己以后是否会做运维,可是我知道自己比較喜欢刨根问底。还有就是我很珍惜我以前掌握过的这些运维的技能。今天突然间问自己,Linux网络配置的那个文件路径是什么。突然间小心脏又绷紧了,我发现记忆已经開始模糊了。尽管陆续有把之前运维的笔记整理上来,可是每次都有种写遗书的淡淡地忧伤在里面。突然间又想暴粗口了。。。。。
# route add –host 11.11.1.11 gw 11.11.1.1
在 linux 系统中网络优先级是通过 metric 控制的,值越小,优先级越高,通过route -n 查看路由
网络工程师在多数情况下,都远使用程协助的方式为客户配置大/小型局域网中的交换机、路由等设备。
ping的错误回显的内容与icmp的差错消息相关的,根据回显报错的节点ip和内容,我们能知道那个节点出现问题,什么问题?
TCP协议规定只有处于同一个网段的IP才能实现互通,如果处于不同网段,则需要借助于所属的网关,即我们可以配置一台双网卡机器作为网关,然后指定路由线路实现跨网段访问。
/etc/sysconfig/network-scripts/ifcfg-eth0
本文简要介绍了 CentOS 7 常用配置。 yum 源配置 阿里云开源镜像 http://mirrors.aliyun.com $ mv /etc/yum.repos.d/CentOS-Base.repo \ /etc/yum.repos.d/CentOS-Base.repo.backup $ wget -O /etc/yum.repos.d/CentOS-Base.repo \ http://mirrors.aliyun.com/repo/Centos-7.repo EP
一 Linux的IP别名功能 1.1 简介 一块网卡具有多个IP地址的功能称为IP别名,即一块网卡可以绑定多个IP地址。 1.2 实现 1 [root@master ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0:0 2 TYPE=Ethernet 3 BOOTPROTO=static 4 DEFROUTE=yes 5 NAME=eth0:0 6 DEVICE="eth0:0" 7 ONBOOT=yes 8 DNS1=223.
最近在实验室新配置了一台用于开发的服务器,一台服务器上建立出多个虚拟机,然后多人连接到这台服务器上的虚拟机来进行开发.由于Linux默认的虚拟网络是NAT模式,需要配置路由转发等,又由于我们的路由器不支持静态路由规则,因此远程连接虚拟机的时候较为麻烦.从而考虑建立网桥,让虚拟机直接从路由器获取IP,而不是从服务器的虚拟网关获取.
Linux 具有功能丰富的网络协议栈,并且兼顾了非常优秀的性能。但是,这是相对的。单纯从网络协议栈各个子系统的角度来说,确实做到了功能与性能的平衡。不过,当把多个子系统组合起来,去满足实际的业务需求,功能与性能的天平就会倾斜。
有这么一个需求:需要远程访问内网的nas。然后现成的解决方案有蒲公英这个方案,但是个人版的话限了只能3个设备,因此找了半天,最后选择了功能类似的zerotier.
我们深受windows、ubuntu、开发板之间互PING问题的困扰, 特别为这个问题录了视频(https://v.qq.com/x/page/h0505eg7z0m.html) 无奈还是有很多很多同学不看视频直接发问,或者说看了视频也解决不了问题,所以我再试图用几页文档解决这个问题。 这是ping问题解决方法最新文档,遇到问题首先看这里,也希望这是最后一个文档。
静态路由是指由用户或网络管理员手工配置的路由信息。当网络的拓扑结构或链路的状态发生变化时,网络管理员需要手工去修改路由表中相关的静态路由信息。静态路由信息在缺省情况下是私有的,不会传递给其他的路由器。当然,网管员也可以通过对路由器进行设置使之成为共享的。静态路由一般适用于比较简单的网络环境,在这样的环境中,网络管理员易于清楚地了解网络的拓扑结构,便于设置正确的路由信息
新增或编辑配置文件route-interfacename,interfacename为网卡名,本文为ens33
大刘的电脑 A 和小美的电脑 B 可以通过网线连接起来,组成一个网络。A 发出来数据,B 都能接收到。反之 A 可以接收 B 发出来的所有数据。
基于策略的路由比传统路由在功能上更强大,使用更灵活,它使网络管理员不仅能够根据目的地址而且能够根据报文大小、应用或IP源地址等属性来选择转发路径。
一、使用 route 命令添加 使用route 命令添加的路由,机器重启或者网卡重启后路由就失效了,方法: //添加到主机的路由 # route add –host 192.168.1.11 dev eth0 # route add –host 192.168.1.12 gw 192.168.1.1 //添加到网络的路由 # route add –net 192.168.1.11 netmask 255.255.255.0 eth0 # route add –net 192.168.1.11 netmask 255.255.255.0 gw 192.168.1.1 # route add –net 192.168.1.0/24 eth1 //添加默认网关 # route add default gw 192.168.2.1 //删除路由 # route del –host 192.168.1.11 dev eth0 二:在linux下设置永久路由的方法: ./etc/sysconfig/static-routes : any net 192.168.3.0/24 gw 192.168.3.254 any net 10.250.228.128 netmask 255.255.255.192 gw 10.250.228.129 使用static-routes的方法是最好的。无论重启系统和service network restart 都会生效。 static-routes文件又是什么呢,这个是network脚本执行时调用的一个文件,这个文件的放置在/etc/sysconfig目录下,在network脚本中的位置是: # Add non interface-specific static-routes. if [ -f /etc/sysconfig/static-routes ]; then grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do /sbin/route add -$args done fi 从这段脚本可以看到,这个就是添加静态路由的方法,static-routes的写法是 any net 192.168.0.0/16 gw 网关ip。
route命令用来显示并设置Linux内核中的网络路由表,route命令设置的路由主要是静态路由。实现两个不同子网之间的通信,需要一台连接两个网络的路由器,或者同事位于两个网络的网关来实现。
排查服务端的 15060 udp/tcp 端口是否开放。排查外层的物理防火墙端口映射。阿里云、华为云、腾讯云,需要在其后台管理页面 安全组 里面配置端口开放。
转载:https://www.kancloud.cn/chunyu/php_basic_knowledge/2106519
最近在排除一个联通应用程序不稳定的问题,查看日志初步分析是网络互联导致,所以要求联通提供了无线网卡来进行初步测试。但是我仅仅想让那一个联通的应用程序走无线网络出,其他的连接依旧走有线网络。所以,就有了
Kube-OVN 0.3.0 的版本起支持子网间的防火墙设置,在 0.5.0 版本开始支持完整的 Kubernetes NetworkPolicy,用户可以实现更细粒度的网络策略控制,更好的对应用级别的网络访问进行安全控制。
在Linux下网卡接口逻辑名被称为eth0,eth1,eth2,.....,ethN,所有网卡接口的配置文件都存储在/etc/sysconfig/network-scripts/下,文件名是以ifcfg-eth0,ifcfg-eth1,ifcfg-eth2,....,ifcfg-ethN形式来命名的。一个网卡接口对应一个配置文件。如果我们要给某个网卡接口配置两个IP地址,我们该怎么办呢?
网线测试仪:准确找出断点位置(网络传输介质断掉的位置)、测出哪里短路、可以测网线的长度,方便找线
0x00 概述 对一个沙箱环境而言,其中最重要的一点就是网络的隔离,OpenStack网络支持Flat、VLAN、VXLAN等模式,配合路由器和防火墙可轻松虚拟一个简单的企业网络。 0x01 网络环境 1.1 网络拓朴 不同网络区域首先得进行网络划分,主要包含三个区域: 外网服务器区:为互联网提供服务,能访问互联网、内外服务器区,不能访问工作区域; 内网服务器区:为外网服务器、工作区提供服务,不能访问互联网、外网服务器区、工作区; 工作区:办公区域,各个部门间网络互通,可访问互联网、内网服务器区、外网服务
1)、主要功能:负责点到点(point-to-point)的传输(这里的“点”指主机或路由器)
vrrp: Virtual Redundent Routing Protocol 虚拟冗余路由协议
原文链接:https://rumenz.com/rumenbiji/linux-route.html
从这篇文章的标题中我们可以看出,这一次的搭建方案主要用到的是 Docker,你可能会很好奇,Docker 跟搭建 4G 代理有什么关系吗?
内网地址10.0.0.2/24 网关10.0.0.1 获取到联通外网的IP为192.168.1.2/24 网关 192.168.1.1
领取专属 10元无门槛券
手把手带您无忧上云