1、DTS文件 &keypad { keypad,num-rows = ; keypad,num-columns = ; linux,keymap = <0x00000012...KEY_UNKNOWN */ 0x07060160 /* KEY_OK */ 0x0707006c>; /* KEY_DOWN */ linux...0x00030066 /* KEY_HOME*/ 00行,03列,键值0x66即HOME建 2、驱动 路径 linux\drivers\input\keybord\ 2、1 probe static...keypad_data->rows, &keypad_data->cols); if (err) return err; if (of_get_property(np, "linux...propname) propname = "linux,keymap"; prop = of_get_property(np, propname, &proplen); if (!
Platform Devices and Drivers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ See for the driver...For further information, see ...._ 这是由于二者结构获取硬件信息 的方式不同造成 的,在powerpc体系是通过dts 对比platform_driver和of_platform_driver 在include/linux/platform_device.h...driver; const struct platform_device_id *id_table; }; 在include/linux/of_platform_device.h struct...*data; #else kernel_ulong_t data; #endif }; —————————————————————————————————— 在在include/linux
/types.h> 15 #include 16 #include 17 #include 18 #include 19 #include 20 #include 21 #include... 22 #include 23 #include 24 #include <linux/input...Linux中输入设备的事件类型有(这里只列出了常用的一些,更多请看linux/input.h中): EV_SYN 0x00 同步事件 EV_KEY 0x01 按键事件 EV_REL 0x02 相对坐标...439 return platform_driver_register(&matrix_keypad_driver); 440 } 441 442 static void __exit
前言 linux将所有的驱动抽象为struct device_driver结构。这样设计可以方便驱动程序更好编写,在编写驱动的时候只需要将此结构嵌入到具体的驱动中即可。...device_driver *driver, char *buf); ssize_t (*store)(struct device_driver *driver, const char *buf,...(_name, _mode, _show, _store) #define DRIVER_ATTR_RW(_name) \ struct driver_attribute driver_attr_##..._name = __ATTR_RW(_name) #define DRIVER_ATTR_RO(_name) \ struct driver_attribute driver_attr_##_name...//确定bus->p是否存在,不存在则会产生panic if ((drv->bus->probe && drv->probe) || //警告信息,有新驱动的时候出出现此
来自: http://www.diybl.com/course/6_system/linux/Linuxjs/200871/129585.html 从 Linux 2.6 起引入了一套新的驱动管理和注册机制...Linux 中大部分的设备驱动,都可以使用这套机制 , 设备用 Platform_device 表示,驱动用 Platform_driver 进行注册。...Linux platform driver 机制和传统的 device driver 机制 ( 通过 driver_register 函数进行注册 ) 相比,一个十分明显的优势在于 platform 机制将设备本身的资源注册进内核...有了 resource 信息,就可以定义 platform_device 了: struct platform_device s3c_device_i2c = { . name...参考资料: linux-2.6.24/Documentation/driver-model/platform.txt 《platform _device 和 platform_driver 注册过程
DTS相关的实现逻辑 3.1 DTS的内容 回忆一下“Linux Regulator Framework(1)_概述”中介绍的machine的主要功能:使用软件语言(struct regulator_init_data...提供,并在regulator注册时调用; driver_data,保存driver的私有数据,并在调用regulator_init时传入。...主要数据结构 4.1 struct regulator_desc 1: /* include/linux/regulator/driver.h */ 2: 3: struct regulator_desc...对有些regulator而言,可以工作在不同的模式,这些模式有不同的改变速度,可想而知,较快的速度,有较大的功耗。...下面是operation mode定义(位于include/linux/regulator/consumer.h中): 1: /* 2: * Regulator operating modes
从Linux 2.6起引入了一套新的驱动管理和注册机制:Platform_device和Platform_driver。...Linux中大部分的设备驱动,都可以使用这套机制, 设备用Platform_device表示,驱动用Platform_driver进行注册。...Linux platform driver机制和传统的device driver 机制(通过driver_register函数进行注册)相比,一个十分明显的优势在于platform机制将设备本身的资源注册进内核...有了resource信息,就可以定义platform_device了: struct platform_device s3c_device_i2c = { .name =...参考资料: linux-2.6.24/Documentation/driver-model/platform.txt 《platform _device和platform_driver注册过程》 platform_device_register
image.png 提示:本文记录了调试ES7210 Driver 过程中的问题与收获。 一、ES7210 简介 ?...二、ES7210 Driver Porting 1....Broadcom 平台 集成 ES7210 ES7210 Driver 需要顺芯原厂提供,虽然Linux 先的音频框架是一样的,但是芯片内部会有一系列寄存器需要设置。...将ES7210.c和ES7210.h复制到src/kernel/linux/v4.4/sound/soc/codecs/路径下 修改src/kernel/linux/v4.4/sound/soc/codecs...主要这个Broadcom平台对接的是TDM接口以及走的ALSA 接口有区别,很多东西不是很熟悉,解决问题过程中需要去弄明白才能快速的解决问题。
static struct platform_driver mxc_v4l2_driver = { .driver = { .name = “mxc_v4l2_capture”, .owner...(struct platform_driver *drv) { drv->driver.bus = &platform_bus_type; //这个platform_bus_type在下面会用到...; return driver_register(&drv->driver); } static int platform_drv_probe(struct device *_dev) {...struct platform_driver *drv = to_platform_driver(_dev->driver); struct platform_device *dev =...(&drv->driver); int driver_register(struct device_driver *drv) { int ret; struct device_driver
Linux kernel支持ARM big·Lttile框架的思路 以一个包含两个cluster,cluster0有4个A15 core,cluster1有4个A7 core为例,我们会很自然的想到,可以把这...上面的方法有两个缺点: 1)这8个core不能任意的组合使用 2)必须存在hypervisor,会增加系统的复杂度 linux 借鉴了这个思路,将ARM hypervisor相关的实现逻辑,移植到...4.1.1 arm big little cpufreq driver的初始化 还是以包含两个cluster,每个cluster有4个CPU core(A15和A7)的系统为例,由“Linux CPU...有关cpufreq driver以及cpufreq_register_driver的描述可参考“Linux cpufreq framework(2)_cpufreq driver”。...以及相关的回调函数已经在“Linux cpufreq framework(2)_cpufreq driver”中有详细介绍,这里再稍作说明一下: .init()是cpufreq driver的入口函数
Linux platform installation method one Note: DM database needs to be installed first 1.Download the driver...package unzip python-126594-20201027.zip 3.Compile the driver package //cd your Driver source code decompression...directory cd python/dmPython_C/dmPython python setup.py install Linux platform installation method..._64/egg/dmPython.py", line 7, in File "build/bdist.linux-x86_64/egg/dmPython.py", line 6,...in the figure: Compilation result Installed /usr/lib64/python2.7/site-packages/dmPython-2.3-py2.7-linux-x86
DRD driver DRD驱动在usb/dwc3 1.1 dts dwc3@44000000 { /* Compatible ID used by the Linux driver for this...= ; dr_mode = "otg"; extcon = ; }; extcon_dwc3: extcon_dwc3 { compatible = "linux...1.2 drd driver usb/dwc3/core.c: static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove...= "linux,extcon-usb-gpio", }, { /* sentinel */ } }; static struct platform_driver usb_extcon_driver...usb_extcon_pm_ops, .of_match_table = usb_extcon_dt_match, }, .id_table = usb_extcon_platform_ids, }; 1)首先根据"linux
ifndef __MXC_KEYMAP_H__ #define __MXC_KEYMAP_H__ static unsigned int keymap[48] = { //这里定义大小为48不是说有48...error = PTR_ERR(keypad->clk); goto failed_free_io; } 这里有两种方法...stdio.h> #include #include #include #include #include keybit); } 发现错在KEY_ROW和KEY_COL这两个宏,查看include/linux...((k) >> 24) & 0xff ) KEY_COL(k) (((k) >> 16) & 0xff) 也就是说这两个宏决定行列的规则是行是键值的高8位,列是键值的次高8位 查看include/linux
使用tmpfs时有如下2个选项用于指定tmpfs的大小和访问权限: tmpfs-size:指定tmpfs的大小 tmpfs-mode:指定mount的目录权限 docker有很多插件可以实现不同的需求,...不同的storage driver实现不同,但所有的storage driver都使用了如下栈式镜像结构以及CoW(copy-on-write)策略。...所以无论有多少个容器共享同一个image,所做的写操作都是对从image中复制到自己的文件系统中的复本上进行,并不会修改image的源文件,且多个容器操作同一个文件,会在每个容器的文件系统里生成一个复本...使用docker ps -s可以查看镜像大小,可以看到"SIZE"有2个值,如container id为5b22377a773d的容器中,38B表示容器读写层的数据总和;virtual表示只读的镜像层加上读写层的大小...overlay和devicemapper已经在docker 18.09版本中被废除 Linux distribution Recommended storage drivers Alternative
前言 以Standalone 的 cluster 提交方式为例,从源码角度解析 driver 的启动流程 当我们敲下脚本执行 spark submit指令之后,查看脚本可知,会启动一个 org.apache.spark.deploy.SparkSubmit...val mainClass = "org.apache.spark.deploy.worker.DriverWrapper" val classPathConf = "spark.driver.extraClassPath...driverId)) } } 这段代码的几个关键点 val mainClass = "org.apache.spark.deploy.worker.DriverWrapper"指定了我们 driver...ayncSendToMasterAndForwardReply[SubmitDriverResponse]( RequestSubmitDriver(driverDescription)) 这里就是将启动 driver...本文到这里就结束了,后面的事情,网上的博客比较多,我就不乱哔哔了,写本篇文章主要是笔者被人问及driver启动,但是究其根的说清楚的在网上没有很清楚的说法,当然也可能是我们自己没找到,嘿嘿。
) PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 8.2p1 Ubuntu 4ubuntu0.3 (Ubuntu Linux...; CPE: cpe:/o:linux:linux\_kernel TRACEROUTE (using port 1720/tcp) HOP RTT ADDRESS 1...: 等下来回头来看这个,点击read more 可以看到有几个链接,指向不同的网站。...再看一下wappalyzer插件分析,站是有nodejs express构建的,先去找一下有没有对应的exp。 2....从返回的数据包中可以看到有一个upload xml的功能,没登录之前就写在页面源代码里面,登录之后就看到有upload了。 此时回到web页面,抓取登录数据包,修改为json格式,再放过去即可。
platform总线是在linux 2.6 内核中加入的一种虚拟总线。platform机制有两部分组成platform_device和platform_driver....下面介绍platform driver。 platform driver遵循linux系统的driver model(这个内容是很大的内容有兴趣的可以自己学习)。...对于device的discovery/enumerate都不是driver自己完成的而是有由系统的driver注册机制完成。...下面介绍下在linux s3c6410中加入 led平台驱动的方法: 首先要在bsp文件中加入 ///*led driver support*/ static struct gpio_led s3c6410...而在驱动root@wsh-desktop:/home/mini/linux-2.6.28.6/drivers/leds# emacs leds-gpio.c主要是实现了platform_driver
Hack The Box - Machines - Driver ---- 靶机:10.10.11.106 攻击机:10.10.14.28 1....Network Distance: 2 hops Service Info: Host: DRIVER; OS: Windows; CPE: cpe:/o:microsoft:windows...UPnP) |\_http-title: Not Found |\_http-server-header: Microsoft-HTTPAPI/2.0 Service Info: Host: DRIVER...其中有一项spoolsv,是后台打印程序服务 存在一个CVE,可以进行权限绕过的RCE漏洞,文中写到可以创建具有完全用户权限的账户,然后我找到了ps1版本的exp git clone到本地kali linux
(2)如何解决中断处理程序执行过长和中断丢失的问题: Linux 将中断处理过程分成了两个阶段,也就是上半部和下半部。.../0596005652/ch04s06.html https://olegkutkov.me/2018/03/14/simple-linux-character-device-driver/ https...://tldp.org/LDP/lkmpg/2.6/html/x323.html https://github.com/0voice/linux_kernel_wiki https://github.com.../0voice/linux_kernel_wiki/blob/main/%E6%96%87%E7%AB%A0/%E7%BD%91%E7%BB%9C%E5%8D%8F%E8%AE%AE%E6%A0%88/...Linux%E5%86%85%E6%A0%B8%E7%BD%91%E7%BB%9Cudp%E6%95%B0%E6%8D%AE%E5%8C%85%E5%8F%91%E9%80%81(%E4%B8%80).
Driver security architecture Driver instances POSIX users/groups Linux process capabilities SELinux...Project Links The KVM Linux hypervisor The QEMU emulator Deployment pre-requisites QEMU emulators: The...Linux process capabilities The libvirt QEMU driver has a build time option allowing it to use the libcap-ng...The Linux capability feature is thus aimed primarily at the scenario where the QEMU processes are running...Cgroups device ACLs Recent Linux kernels have a capability known as "cgroups" which is used for resource
领取专属 10元无门槛券
手把手带您无忧上云