发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/164682.html原文链接:https://javaforall.cn
ifconfig 早期网络管理的指令,目前Linux新的发行版本很多默认不带ifconfig命令,但可以以通过安装软件包net-tools方式进行使用. ifconfig 查看当前所有up状态的网卡信息 ifconfig xxxx 查看xxxx网卡详细信息 ifconfig eth0 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.2.255 配置网卡信息 ifconfig eth0 up 启动eth
ip 命令是一个新的网络命令行实用程序,用于在 Linux 系统上为网络接口分配 IP 地址或配置/更新网络配置。 它是 iproute2 软件包的一部分,并提供多项网络管理任务,例如打开或关闭网络接口、分配和删除 IP 地址和路由、管理 ARP 缓存等等。 ip命令与旧的ifconfig 命令非常相似,但它的功能要强大得多,添加了更多的功能和能力。 如何配置静态 IP 地址 Internet 协议 (IPv4) 要在 Linux 中配置静态 IP 地址, 你需要更新或编辑网络配置文件以将静态 IP 地址分
Linux 的 ifconfig 命令可以用来查看、配置或激活网络设备的信息,包括设备的IP地址、子网掩码、广播地址、MAC地址等。
2016年08月07日 11:25:58 xingpacer 阅读数:43344更多
Linux网络基本网络配置方法介绍 网络信息查看 设置网络地址: cat /etc/sysconfig/network-scripts/ifcfg-eth0 你将会看到: DEVICE=eth0 BOOTPROTO=statics HWADDR=00:0C:29:13:D1:6F ONBOOT=yes TYPE=Ethernet IPADDR=192.168.0.212 NETMASK=255.255.255.0 BOOTPROTO=statics :表示使用静太IP地址。 ONBOOT=y
注:虚拟机系统通过克隆方式得到其他系统后,在同一网络中无法上网,很可能由于其网卡的UUID相同造成冲突引起的。 解决方案:
今天在一台PC上安装了CentOS 7,当时选择了最小安装模式,安装完成后马上用ifconfig查看本机的ip地址(局域网已经有DHCP),发现报错,提示ifconfig命令没找到。 [root@ce
netem 与 tc: netem 是 Linux 2.6 及以上内核版本提供的一个网络模拟功能模块。该功能模块可以用来在性能良好的局域网中,模拟出复杂的互联网传输性能,诸如低带宽、传输延迟、丢包等等情况。使用 Linux 2.6 (或以上) 版本内核的很多发行版 Linux 都开启了该内核功能,比如 Fedora、Ubuntu、Redhat、OpenSuse、CentOS、Debian 等等。 tc 是Linux 系统中的一个工具,全名为 traffic control(流量控制)。tc 可以用来控制 netem 的工作模式,也就是说,如果想使用 netem ,需要至少两个条件,一个是内核中的 netem 功能被包含,另一个是要有 tc 。
linux下添加路由的方法 一、查看及添加临时路由 1.查看路由(linux下) [root@nfs ~]# route #同netstat -rn Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.90.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.80.0 * 255.255.255.0 U 0 0 0 eth0 192.168.10.0 * 255.255.255.0 U 0 0 0 eth1 192.168.90.0 192.168.90.2 255.255.255.0 UG 0 0 0 tun0 link-local * 255.255.0.0 U 1002 0 0 eth0 link-local * 255.255.0.0 U 1003 0 0 eth1 default 192.168.80.2 0.0.0.0 UG 0 0 0 eth0 注:windows查看路由命令:route print或netstat -rn 输出结果中各个字段的含义是: Destination表示路由的目标IP地址 Gateway表示网关使用的主机名或者是IP地址。上面输出的”*”表示没有网关。 Genmask表示路由的网络掩码 Flags是表示路由的标志。可用的标志及其意义是:U表示路由在启动,H表示target是一台主机,G表示使用网关,R表示对动态路由进行复位设置;D表示动态安装路由,M表示修改路由,!表示拒绝路由 Metric表示路由的单位开销量 Ref表示依赖本路由现状的其它路由数目 Use表示路由表条目被使用的数目 Iface表示路由所发送的包的目的网络 2.使用 route 命令添加 使用route 命令添加的路由,机器重启或者网卡重启后路由就失效了 方法: 添加到主机的路由 route add -host 192.168.168.110 dev eth0 route add -host 192.168.168.119 gw 192.168.168.1 添加到网络的路由 route add -net IP netmask MASK eth0 route add -net IP netmask MASK gw IP route add -net IP/24 eth1 添加默认网关 route add default gw IP 删除路由 route del -host 192.168.168.110 dev eth0 3.使用ip route添加路由 添加路由 ip route add 192.168.0.0/24 via 192.168.0.1 ip route add 192.168.1.1 dev 192.168.0.1 删除路由 ip route del 192.168.0.0/24 via 192.168.0.1 二、在linux下设置永久路由的方法: 1.在/etc/rc.local里添加 route add -net 192.168.3.0/24 dev eth0 route add -net 192.168.2.0/24 gw 192.168.3.254 2.在/etc/sysconfig/network里添加到末尾 方法:GATEWAY=gw-ip 或者 GATEWAY=gw-dev 3./etc/sysconfig/static-router : 这个是network脚本执行时调用的一个文件 any net x.x.x.x/24 gw y.y.y.y any net 192.168.3.0/24 gw 192.168.3.254 any net 10.250.228.128 netmask 255.255.255.192 gw 10.250.228.129 4.创建名为route- eth0的文件 vi /etc/sysconfig/network-script/route-eth0 在此文件添加如下格式的内容 192.168.1.0/24 via 192.168.0.1 5.查看经过的路由 linux查看经过的路由traceroute www.baidu.com windows查看经过的路由tracert -d www.baidu.com 三、开启 IP 转发: echo “1” >/proc/sys/net/ipv4/ip_forward (临时) vi /etc/sysctl.conf –> net.ipv4.ip_forward=1 (永久开启)
route 命令用于显示和操作IP路由表。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在Linux系统中,设置路由通常是 为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置为 Linux机器的默认路由。要注意的是,直接在命令行下执行route命令来添加路由,不会永久保存,当网卡重启或者机器重启之后,该路由就失效了;要想永久保存,有如下方法:
Linux的ip命令和ifconfig类似,但前者功能更强大,并旨在取代后者。使用ip命令,只需一个命令,你就能很轻松地执行一些网络管理任务。ifconfig是net-tools中已被废弃使用的一个命令,许多年前就已经没有维护了。iproute2套件里提供了许多增强功能的命令,ip命令即是其中之一。
route命令用于显示和操作IP路由表。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在Linux系统中,设置路由通常是 为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置为 Linux机器的默认路由。要注意的是,直接在命令行下执行route命令来添加路由,不会永久保存,当网卡重启或者机器重启之后,该路由就失效了;要想永久保存,有如下方法:
🐱 猫头虎博主报道!网络配置对于Linux系统至关重要,它决定了你的系统如何与外部世界交互。不论你是初学者还是资深运维工程师,我都为你带来了这份全面而深入的Linux网络配置指南。希望每位热衷于Linux的朋友都能轻易找到这篇文章。让我们一起揭开Linux网络配置的神秘面纱!🌐
网卡命名规则受biosdevname和net.ifnames两个参数影响 如果你的网卡名不是eth0怎么设置为eth0呢?
arp(Address Resolution Protocol)操作主机的 ARP 缓存。
服务正常启动,ssh配置文件应该不会有改动。云服务器的防火墙,是在控制台控制的,机器本身的防火墙默认是关闭的。
版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 举报,一经查实,本站将立刻删除。
在windows上安装Linux虚拟机 windows 192.168.43.100 路由 43.254 CentOS5.4 linux 192.168.43.101 路由 43.254 这时 linux windows 上网都是正常的。 启动linux的路有功能 sysctl -w net.ipv4.ip_forward=1 也可以设置到配置文件中,重启生效 vi /etc/sysctl.conf net.ipv4.ip_forward = 1 查看方式: sysctl net.i
大家好,又见面了,我是你们的朋友全栈君。 Linux如何添加路由 a.如何使用命令给Linux添加一个默认网关? 缺省网关路由: 默认网关就是数据包不匹配任何的路由规则,最后流经的地址关口!网关按字面意思就是网络的关口 ,就相当于我们办公室的大门一样,大家上班就要经过办公室的门一样。 使用route -n 查看网关信息,或者 netstat -rn查看路由 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 如何删除路由表: [root@machine1 ~]# route del default gw 192.168.0.1 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 配置方法: 1、setup 2、配置网卡配置文件:/etc/sysconfig/network-scripts/ifcfg-eth0 关键字:GATEWAY=192.168.0. 重启网卡配置生效 3、route add default gw 192.168.0.1 #(临时生效) [root@machine1 ~]# route add default gw 192.168.0.1 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 如何添加网络路由? b.网络路由:即去往某个网段的路由 一般多个网段之间相互通信,希望建立一条优先的路由,而不是通过默认的网关。拿家里来说, 你要去卫生间有卫生间的门,去卧室有卧室的门。这两个门就是网络路由了。家里的大门呢,就是 默认路由。
说到docker,大家都懂。但是LXC可能就比较陌生。Docker的起源于LXC。LXC的英文全称是Linux Container,相比较其他虚拟机而言,是一种轻量级虚拟化技术,它介于Chroot(linux的一个改变根目录挂载点的机制)和完整开发的虚拟机之间。LXC不使用单独的内核资源,但是可以创建一个类似的Linux操作系统环境。
前言:主要针对于Linux中网络/路由/通信通道类命令进行学习,加深对Linux的使用;
ifconfig(configure a network interface)命令是系统管理员命令,用于查看和配置网络接口。
在Linux下网卡接口逻辑名被称为eth0,eth1,eth2,.....,ethN,所有网卡接口的配置文件都存储在/etc/sysconfig/network-scripts/下,文件名是以ifcfg-eth0,ifcfg-eth1,ifcfg-eth2,....,ifcfg-ethN形式来命名的。一个网卡接口对应一个配置文件。如果我们要给某个网卡接口配置两个IP地址,我们该怎么办呢?
The ip command is a Linux net-tool for system and network administators.
公司新来一台服务器,系统已经装好了,操作系统为CentOS,具体版本不太清楚。但是插上网线后,不能联网,通过初步分析,应该是网卡配置的问题。
修改IP永久生效按以下方法 vi /etc/sysconfig/network-scripts/ifcfg-eth0(eth0,第一块网卡,如果是第二块则为eth1) 按如下修改ip: DEVICE=eth0 #如果是第二块刚为eth1 BOOTPROTO=static #网卡获得ip地址的方式,static和dhcp两种方式 IPADDR=192.168.1.122 #改成要设置的IP NETMASK=255.255.255.0 #子网掩码 GATEWAY=192.168.1.1 #网关地址 HWADDR
在日常linux管理工作中,需要为应用配置单独的IP地址,以达到主机与应用的分离,在应用切换与迁移过程中可以做到动态切换,特别是在使用HA的时候,这种方案可以保证主机与应用的隔离,对日常的运维有很大的益处.
结果是自上而下, 就是说, 哪条在前面, 哪条就有优先, 前面都没有, 就用最后一条default
# route add –host 11.11.1.11 gw 11.11.1.1
1.查看当前网络设置 ifconfig ifconfig eth0; #查看eth0接口网络设置 ifconfig -a #查看所有网络接口的信息 route 显示路由表 route | grep default 显示主机的默认网关。 ping -c 4 192.168.1.10 发送指定数量的数据包进行网络连接测试。 traceroute 192.168.1.10 测试与其他主机的网络连接路径。 hostname 显示当前主机名称。 ifdown eth0
如何配置Linux系统的IP地址,使其能够连接局域网甚至外网。其实这并不难,Linux系统网络配置的方法有多种。
1 限制流出速度 限制流出速度,主要通过tc这个工具,常用的有三个队列: tbf队列,令牌桶队列,适用于流量×××; cbq队列,分类的队列,用于实现精细的qos控制,配置复杂; htb队列,分层的令牌桶队列,用于实现精细的qos控制,配置比cbq简单些; 通过tbf限制流程速度的例子: tc qdisc add dev eth0 root tbf rate 51200kbit latency 50ms minburst 200k burst 200k 限制网卡eth0流出速度为51200kbit,正确的设置方法,和minburst这个参数有很大的关系,不同的硬件环境和系统需要具体调试。 通过htb实现不同目标地址的限速 删除 tc qdisc del dev eth0 root tbf 修改 tc qdisc change dev eth0 root tbf rate 2200kbit latency 5000ms burst 1540 查看当前队列 tc -s -d qdisc ls
/etc/sysconfig/network-scripts/ifcfg-ens33
其中 COMMAND 为要在对象上执行的操作。可能的操作取决于对象类型。一般来说,可以 add、delete 和 show(或 list)对象,但有些对象不允许所有这些操作,或者有一些额外的命令。help 命令对所有对象都有效,它打印出可用命令和参数语法约定的列表。
Linux下用于配置或者查看IP地址、路由表的命令有很多,本文打算将其都罗列出来,后面想到其它的命令再一一补充。
大部分的网络接口配置都可以在/etc/network/interfaces中解决。例如为网卡配置静态IP(dhcp),设置路由信息,配置IP掩码,设置默认路由等。
route命令用来显示并设置Linux内核中的网络路由表,route命令设置的路由主要是静态路由。实现两个不同子网之间的通信,需要一台连接两个网络的路由器,或者同事位于两个网络的网关来实现。
这篇文章我总结得比较详尽,可以当字典查,建议收藏,不过别光顾着收藏,点赞什么的鼓励我一下,这能让我更有动力给大家输出更好的内容。
功能:ifconfig命令被用于配置和显示Linux内核中网络接口的网络参数。用ifconfig命令配置的网卡信息,在网卡重启后机器重启后,配置就不存在。要想将上述的配置信息永远的存的电脑里,那就要修改网卡的配置文件了。
tcpdump是linux命令行下常用的的一个抓包工具,记录一下平时常用的方式,测试机器系统是centos 7。
ifconfig 命令用于配置和显示 Linux 内核中网络接口的网络参数。用 ifconfig 命令配置的网卡信息,在网卡重启后机器重启后,配置就不存在。若想将上述的配置信息永久存储在电脑里,需要修改网卡的配置文件。
基于MHA+consul的高可用方案上线已经一段时间了,目前比较稳定,之前线上环境使用的是VIP+MHA的高可用方案,这种方案在跨机房之间进行故障切换存在问题,所以现在要将服务器上的VIP(virtual IP address)给摘除掉,要摘除VIP,需要查看当前VIP是否有应用服务进行连接,这里利用到了tcpdump这个Linux命令来查看。
eth0 09be0948-faf1-43b6-a5a4-c19efab0bb48 ethernet eth0
常见的上网外设有有线以太网、WIFI、4G/5G等接口,一块硬件主板经常会搭载多种网络访问硬件资源。如何配置不同网络外设的使用优先级呢?本文将为您介绍Linux系统下的常用配置方法。
这是100个 Linux 命令的第10篇文章,主要介绍如何在 Linux 主机中管理网络,包括网络接口配置、主机名配置等。
tcpdump和ethereal可以用来获取和分析网络通讯活动,他们都是使用libpcap库来捕获网络封包的。
领取专属 10元无门槛券
手把手带您无忧上云