时区文件 CentOS 和 Ubuntu 的时区文件是 /etc/localtime , 但是在 CentOS7 以后 localtime 以及变成了一个链接文件 : # ll /etc/localtime.../etc/localtime CentOS7 , RHEL7 , Scientific Linux 7 , Oracle Linux 7 : 最好的方法是使用 timedatectl 命令 :.../Asia/Shanghai /etc/localtime 查看时间 # date Wed Aug 15 10:03:44 CST 2018 修改时间 将系统日期设定成 2009年11月3日下午5...点55分55秒 : # date -s "11/03/2009 17:55:55" 将系统时间设定成 下午5点55分55秒 : # date -s 17:55:55 查看硬件时间 (...BIOS的) : # hwclock -r 将当前时间和日期写入 BIOS , 避免重启后失效 : # hwclock -w 同步时间 yum install ntpdate #
1、调整时区 cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime linux提供是依据/etc/localtime文件内容知道目前系统的时区信息...,这个文件一般是从/usr/share/zone/里面选择适当的时区复制过来就可以使用 2、手动调整时间(需要ntpdate) ntpdate us.pool.ntp.org 没有安装ntpdate...us.pool.ntp.org /usr/sbin/hwclock --systohc 另用下列指令設定此腳本為可執行: # chmod +x /etc/cron.daily/ntpupdate 中国国家北京时间授时中心...: http://www.time.ac.cn/stime.asp 其他网络时间服务器地址如下 time.nist.gov(美国) ntp.fudan.edu.cn(复旦)(国内用户推荐使用此服务器)
linux系统时间有两个,一个是硬件时间,即BIOS时间,就是我们进行CMOS设置时看到的时间,另一个是系统时间,是linux系统Kernel时间。...当Linux启动时,系统Kernel会去读取硬件时钟的设置,然后系统时钟就会独立于硬件运作。有时我们会发现系统时钟和硬件时钟不一致,因此需要执行时间同步。...方法一 一、date 查看/设置系统时间 1、将日期设置为2017年11月3日 [root@linux-node ~]# date -s 11/03/17 2、将时间设置为14点20分50秒 [root...~]# hwclock --hctosys 或者 [root@linux-node ~]# clock --hctosys 备注:hc代表硬件时间,sys代表系统时间,以硬件时间为基准,系统时间找硬件时间同步...[root@linux-node ~]# hwclock --systohc或者 [root@linux-node ~]# clock --systohc 备注:以系统时间为基准,硬件时间找系统时间同步
时间以及时区设置 by:授客 1.首先确认使用utc还是local time....)使用UTC格式,linux可以处理UTC时间和蹩脚的Windows所使用的local time 到底是使用UTC还是local time可以这样来确定: 如果机器上同时安装有Linux和Windows...Linux 启动时,其中的一个脚本(/etc/rc.d/rc.sysinit)会运行/sbin/hwclock 程序,把当前的硬件时钟复制为系统时间。以后修改时间通过修改系统时间实现。...为了保持系统时间与CMOS时间的一致性,Linux每隔一段时间会将系统时间写入CMOS。hwclock假定硬件时钟已经设置为本地时钟,除非带有utc参数。...,替换系统默认时区 [root@localhost laiyu]# cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime cp: "/usr/share
说明:有时候vps时区和时间不一样会出很多问题,这里就不举例了,只说下方法。 1、修改北京时区 这里以修改北京时间作为默认时区,如果有其他需要的,可以对应修改。...rm -rf /etc/localtime #先删除默认的时区设置 ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime #替换上海/北京作为默认...2、手工修改当前系统的时间 date -s '14:48:00 2015-05-10' 这里,就修改为当前的时间。...3、设置同步时间 ntpdate us.pool.ntp.org 设置同步服务器时间,安装完毕之后,我们用date测试下当前时间。...总结,这样我们通过上面的3步骤就快速的实现Linux VPS系统时间与当前需要的时区和时间同步一致,确保项目的正常运行。
Linux-Redhat系统更改系统时区 [root@localhost ~]# date #查看本地时间 Thu May 19 23:41:32 EDT 2022 [root@localhost...当前系统版本: Red Hat Enterprise Linux Server release 7.0 (Maipo) 查看目前的时区: [root@localhost ~]# timedatectl...RTC time: Fri 2022-05-20 03:48:45 Timezone: America/New_York (EDT, -0400) #现在系统的时区 NTP...enabled: yes NTP synchronized: yes RTC in local TZ: no DST active: n/a [root@localhost ~]# date #当前系统时间...Fri May 20 11:49:21 CST 2022 [root@localhost ~]# hwclock --show #当前系统硬件时间 Fri 20 May 2022 11:49:29 AM
,当然你也可以通过指定其他的时区,将系统时间对齐为其他地区的时间。...查看亚洲各地的时区名称 timedatectl list-timezones | grep Asia # 修改系统时间 同步系统时间(自动) 在同步系统时间的之前,首先需要修改系统的时区,这样在同步系统时间的时候才会将系统时间对齐到该时区...在同步系统时间时,由于起初并未修改系统的时区,导致每次同步系统时间都和宿主机不一致。宿主机使用的时间就是日常生活中使用的北京时间,但每次执行命令后,系统的时间都和北京时间不一致。...最初我以为是同步系统时间的命令写错了,但是后来修改了系统时区之后,再次使用相同的同步命令,系统时间就同步为北京时间了。...# 1和2是等效的 使用该命令的前提是,linux服务器能够连接公网,如果有些同学希望在内网的服务器进行系统时间同步,则需要询问自己公司的时间校准服务器。
在Linux计算机上,有两个时间,一个是硬件时间(BIOS中记录的时间,称为hwclock),另一个是操作系统时间(osclock)。...硬件时间与操作系统时间的交互流程 1、开机时,操作系统从BIOS中读取硬件时间+时区,然后根据osclock的时区,转换为对应的时间。...然后操作系统时间与硬件时间就独立运行,相互不影响,我们 通过应用程序获取的时间用的都是操作系统时间。这一步是开机时os自动完成的。...ubuntu修改时区和时间的方法 1.首先查看时区: codetc@webubuntu:~$ date -R Tue, 17 Dec 2013 18:23:01 +0800 如果要修改时区,执行sudo...9 4.选择时区:北京时间 ?
Linux 时钟分为系统时钟(System Clock)和硬件(Real Time Clock ,简称RTC )时钟。...当Linux 启动时,硬件时钟会去读取系统时钟的设置,然后系统时钟就会独立于硬件运作。 Linux中的所有命令(包括函数)都是采用的系统时钟设置。...在Linux中,用于时钟查看和设置的命令主要有date、hwclock和clock。...–-date=”01/05/15 13:19″ (月/日/年 时:分:秒) 3、硬件时间和系统时间的同步 按照前面的说法,重新启动系统,硬件时间会读取系统时间,实现同步,但是在不重新启动的时候,需要用hwclock...硬件时钟与系统时钟同步:# hwclock -–hctosys(hc代表硬件时间,sys代表系统时间)或者# clock –-hctosys 系统时钟和硬件时钟同步:# hwclock -–systohc
时间与时区 整个地球分为二十四时区,每个时区都有自己的本地时间。...Ø UTC时间 与 GMT时间 我们可以认为格林威治时间就是时间协调时间(GMT = UTC),格林威治时间和UTC时间都用秒数来计算的。...Ø UTC时间与本地时间 UTC + 时区差 = 本地时间 时区差东为正,西为负。...此函数返回的时间日期未经时区转换,而是UTC时间。...,北京为东八区 Fri, 16 Oct 2015 23:12:18 +0800 可以看到gmtime返回的时间日期未经过时区转换,这里和date打印的刚好差8小时(中国时区)。
timedatectl 查看时间,时区,格林威治时间 ?...list-timezones 列出系统上支持的时区 set-timezone 设定时区 set-time 设置时间 set-btp 设置同步ntp 修改时区tzselect ---------...也可以直接用下面命令直接更换时区 cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime timedatec修改时区 timedatectl set-timezone...修改后使用hwclock同步bios时间 ntpdate同步时间 国内常用ntp服务器地址 ntp.sjtu.edu.cn 202.120.2.101 (上海交通大学网络中心NTP服务器地址
方法1 /** * 目标时区时间 → 当前时区时间 */ public static Date dateFromTargetToCurrentZone(Date date, ZoneId targetZoneId...(currentZonedDateTime.toLocalDateTime().toInstant(ZonedDateTime.now().getOffset())); } 方法2 /** * 目标时区时间...→ 当前时区时间 */ public static Date dateFromTargetToCurrentZone2(Date date, ZoneId targetZoneId) { /.../ 为了获取没有时区的时间 LocalDateTime localDateTime = date.toInstant().atZone(ZonedDateTime.now().getZone()...).toLocalDateTime(); // localDateTime视为targetZone的localDateTime → 前时区时间 return Date.from
方法1 /** * 当前时区时间 → 目标时区时间 */ public static Date dateFromCurrentToTargetZone(Date date, ZoneId targetZoneId...) { // 获取对应时区的ZonedDateTime ZonedDateTime zonedDateTime = date.toInstant().atZone(targetZoneId...Date.from(zonedDateTime.toLocalDateTime().toInstant(ZonedDateTime.now().getOffset())); } 方法2 /** * 当前时区时间...→ 目标时区时间 */ public static Date dateFromCurrentToTargetZone2(Date date, ZoneId targetZoneId) { LocalDateTime
在新的 RedHat 8 或者更新的 Linux 版本中,我们可以使用 timedatectl 来对时间进行相关的操作进行一些修改。...设置时区 当系统完成初始化以后,对时间的设置是非常必要的,可以使用下面的方法对时区进行修改。...例如,如果你希望修改时区为美国东部时间的话,直接运行下面的命令: timedatectl set-timezone America/New_York 就可以了。...设置 NTP 同步 以前,我们还需要装一大堆的 NTP 服务来对时间进行同步。 现在只需要运行: timedatectl set-ntp yes 就可以设置自动同步了。 是不是非常方便了。...总结 可以只运行 2 句话解决时间同步和时区的问题。
django时区默认使用UTC,中国人使用CST东八区。...settings.py改为上海时区 #settings.py TIME_ZONE = 'Asia/Shanghai' # True:使用UTC, False:使用系统时区 USE_TZ = False... 系统时区保持一致: cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime echo "Asia/Shanghai" > /etc/timezone
1.手动修改(缺点:有偏差) 使用date查看当前时间 date -s 时分秒:修改时间 eg:date -s 8:10:10 date -s 完整时间YYYY-MM-DD hh:mm[:ss]...eg: "2018-10-10 10:10:10" 注意双引号 重启Linux,时间失效,可以将时间写入BIOS, hwclock -w 2.使用网络时间,与网络时间同步 查看ntp服务是否启动 service...service ntpd status ###如果没安装会提示, 如果没有安装ntp 安装ntp服务命令: apt-get install ntp 或者 yum install ntp 查看当前时区...:date -R 如果是-0500,则不正常,+0800为正常时区 2.1使用tzselect更改时区,选择亚洲 - 中国 - 北京,看英文 修改完成之后可以再次查看时区:date -R,如果还是-
文章时间:2020年3月5日 09:59:20 解决问题:系统时间异常,修复系统时间 CentOS系统 yum install ntpdate ntpdate 某个服务器节点 Ubuntu系统
1.修改时区 [root@localhost ~]# cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime 2.用ntpdate从时间服务器更新时间...192.168.26.11 offset -0.001832 sec #可加入Crontab定时任务,每隔十分钟同步一次 */10 * * * * ntpdate 192.168.26.11 3.用ntp搭建自己的时间服务器...127.0.0.1 #给于本机所有权限 restrict 192.168.1.0 mask 255.255.255.0 notrap nomodify #给于局域网机的机器有同步时间的权限...server 192.168.26.11 prefer #设置时间服务器,加prefer表示优先 server 127.127.1.0 # local clock fudge ...within 8202 ms polling server every 64 s #设置开机启动 [root@localhost ~]# chkconfig ntpd on 4.ntpd系统日志
领取专属 10元无门槛券
手把手带您无忧上云