ifconfig命令在CentOS6是自带有的,但是在CentOS7默认是没有的,需要安装net-tools这个包。
网卡(Network Interface Card,简称NIC),也称网络适配器,是电脑与局域网相互连接的设备。无论是普通电脑还是高端服务器,只要连接到局域网,就都需要安装一块网卡。如果有必要,一台电脑也可以同时安装两块或多块网卡。
概述:由于近期要使用以太网PHY芯片,于是在网上查找各种资料,学习这部分的知识,这篇文章是对当前的学习做一个汇总。海翎光电的小编目前也是在学习PHY,所以难免会有错误不足,有什么需要更正补充的,欢迎大家一起讨论交流。
linux网络相关 ifconfig查看网卡ip(yum install net-tools) ifup ens33/ifdown ens33 设定虚拟网卡ens33:1 mii-tool ens33 查看网卡是否连接 ethtool ens33 也可以查看网卡是否连接 更改主机名 hostnamectl set-hostname aminglinux DNS配置文件/etc/resolv.conf /etc/hosts文件 ifconfig命令 在centos7中,只能只用默认的 ip addr命令查看I
随着时代的进步,不管是企业还是教育行业,都会创建一个网站,毕竟现在很多人遇到问题都会先在网上进行搜索。搜索相关的品牌进行了解,当用户进入到品牌网站时,就会从中了解到企业的形象与价值所在,所以网站的搭建对所有行业都有着很大的影响。那么学校域名是什么?
说是网络,其实是网卡驱动。而且是针对于FREESCALE芯片的FEC端的驱动,我不知道别的芯片厂商的FEC模块是怎么样的, 但就我接触过的几款FREESCALE的芯片来看,比如基于POWERPC的860T和ARM系列的MX27等,他们的FEC有一个明显的特点就是 都是由BD和一个DMA缓冲组成,而这个DMA是专用的,也就是只是给FEC使用,区别于芯片内的DMAC模块。我们先来从fec.c这 个与硬件直接相关的看起: 首先找到module_init(fec_enet_module_init);这里fec_enet_module_init为入口点 fec_enet_module_init() 首先调用fec_arch_init,它调用gpio_fec_active设置GPIO为FEC模式,然后如果有电源管理的话,就调用 mxc_fec_power_on开启电源。接着调用clk_get,clk_enable, clk_put设置FEC的CLOCK,这里退出fec_arch_init函数,接 着循环FEC_MAX_PORTS次,也就是有几个FEC就循环几次,在这里我们只有一个FEC,所以这个循环不用管。接下来因为我们 用的是以太网,所以调用dev = alloc_etherdev(sizeof(struct fec_enet_private));申请一个以太网设备描述,其中 struct fec_enet_private是用来描述FEC专有的数据结构。如下: /* The FEC buffer descriptors track the ring buffers. The rx_bd_base and * tx_bd_base always point to the base of the buffer descriptors. The * cur_rx and cur_tx point to the currently available buffer. * The dirty_tx tracks the current buffer that is being sent by the * controller. The cur_tx and dirty_tx are equal under both completely * empty and completely full conditions. The empty/ready indicator in * the buffer descriptor determines the actual condition. */ struct fec_enet_private { /* Hardware registers of the FEC device */ volatile fec_t *hwp; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ unsigned char *tx_bounce[TX_RING_SIZE]; struct sk_buff* tx_skbuff[TX_RING_SIZE]; struct sk_buff* rx_skbuff[RX_RING_SIZE]; ushort skb_cur; ushort skb_dirty; /* CPM dual port RAM relative addresses. */ void * cbd_mem_base; /* save the virtual base address of rx&tx buffer descripter */ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ cbd_t *tx_bd_base; cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ cbd_t *dirty_tx; /* The ring entries to be free()ed. */ struct net_device_stats stats; uint tx_full; spinlock_t lock; uint phy_id; uint phy_id_done; uint phy_status; uint phy_speed; phy_info_t const *p
网站的作用是不可忽视的,很多事情都可以通过网站完成,网站按照功能的不同,可以被分为购物网站、旅游网站以及政府机构网站等等,网站与域名之间具有紧密联系,网友需要先知道网站域名,才能够浏览网站。gov是什么域名?申请域名有哪些注意事项?
通过SAP MII,SAP提供了一个基于Web的、标准化和灵活的IT平台,用于垂直集成到生产中。这将面向流程的制造单元的生产流程与SAP ERP连接起来。作为中央信息交换中心,SAP MII(SAP制造集成和智能)从一系列数据源(如车间系统)提取数据,处理这些信息,并为流程优化和提高生产效率提供广泛的监控、控制和管理选项。
mii-tool(media-independent interface tool)查看、操作媒体无关的接口状态。
在开发以太网接口的过程中经常看到 MII、RMII、GMII、RGMII等英文缩写名称。在开发接口前,先将这些名词搞清楚。
Linux网络相关: 如果没有 ifconfig 命令 那么需要安装一个包(yum install net-tools) 如果 ifconfig 命令查看不到网卡的话,那么可以使用 ifconfig
集成和连接是成功的工业4.0计划的关键。SAP Manufacturing Integration and Intelligence(SAP MII)是集成各种应用程序、设备和传感器并将这些信息连接到车间人员的完美解决方案。SAP MII将车间与SAP ERP业务系统实时本地集成。除了集成功能之外,SAP MII还通过仪表盘和分析功能提供服务来构建、分发和提供制造数据的上下文。仪表盘和分析使制造人员能够可视化并利用准确及时的数据进行关键决策。
描述:从2019年七月初起公司接收到增值电信定级备案以及“增值电信业务许可证”年检的企业通知,经过几天的梳理总结了这一篇文章,给正在进行增值电信定级备案的小伙伴们一个参考;
TX_ER(Transmit Error): 发送数据错误提示信号,同步于TX_CLK,高电平有效,表示TX_ER有效期内传输的数据无效。对于10Mbps速率下,TX_ER不起作用;
1. 如何看当前Linux系统有几颗物理CPU和每颗CPU的核数? 物理cpu个数:cat /proc/cpuinfo |grep -c ‘physical id’ CPU一共有多少核:grep -c processor /proc/cpuinfo 将CPU的总核数除以物理CPU的个数,得到每颗CPU的核数。 2. 查看系统负载有两个常用的命令,是哪两个?这三个数值表示什么含义呢? 两个命令分别是 w 和 uptime 这三个系统负载值分别表示在1分钟、5分钟和15分钟内平均有多少个任务处于活动状
在UVM验证平台中,callback的最大用处就是提高验证平台的复用性。很多情况下,我们期望在一个项目中开发的验证平台能够用于另一个项目。但是,通常来说,完全复用是非常难实现的,两个不同的项目之间或多
做网站的人应该都知道域名的意思,域名的就好比是家门口中的那块门牌号,每家每户都有独立无二的门牌号。域名也是一个意思,都是全世界独立无二的域名,接通着ip地址,让人们通过域名的方式进行访问网站里面的内容。域名也有顶级之分,下面就给大家讲讲顶级域名是什么意思?
本文主要分析MII/RMII/SMII,以及GMII/RGMII/SGMII接口的信号定义,及相关知识,同时本文也对RJ-45接口进行了总结,分析了在10/100模式下和1000M模式下的设计方法。
接口连线很多,是能、时钟、标志信号的error、valid等等,共16根线,不管对于硬件还是FPGA控制都是不怎么友好的!
DM9161A是一款高性能的以太网物理层收发器(PHY),它支持MII(介质独立接口)和RMII(减少MII接口)两种接口标准,并且具有低功耗、低成本、高集成度等特点。在网络通信中,PHY负责将数字信号转换为模拟信号,然后通过物理介质(如双绞线)传输到远端设备的PHY,再由远端PHY将模拟信号转换为数字信号,最终交给网络协议栈进行处理。因此,PHY是网络通信中不可或缺的一部分。
1,首先从模块加载函数module_init(fec_enet_module_init);
总结:上面已经将phy的状态设置成了 phydev->state = PHY_READY,同时完成了emac接口下的phy设备驱动注册,接下来将分析如何使用该phy设备驱动。
自从中国加入世界贸易组织,国内外商业交易日益频繁,为了增加国内企业在国外市场的影响力,我国特地申请了cn域名,目的是方便外国企业寻求国内企业合作,同时向国外市场展示国内的产品和服务。不过,国内很多企业对cn域名是什么?cn域名怎么样?心存疑虑,那么请跟随小编一起看下文。
#include <errno.h> //提供错误号errno的定义,用于错误处理
创龙科技SOM-TL335x-S是一款基于TI Sitara系列AM3352/AM3354/AM3359 ARM Cortex-A8高性能低功耗处理器设计的低成本工业级核心板,通过邮票孔连接方式引出千兆网口、LCD、GPMC等接口。核心板经过专业的PCB Layout和高低温测试验证,稳定可靠,可满足各种工业应用环境。典型应用领域分别为:通讯管理、数据采集、人机交互、运动控制、智能电力。
伴随着互联网的发展,各行各业为了提高用户体验,纷纷开始请人搭建一个属于企业自己的网站。搭建网站的目的就是为了提高企业的形象,让用户在网上搜索企业信息的时候能进入到企业网站,从中了解企业的优势与形象。下面先简单地给大家介绍一下什么叫网站域名?
从硬件的角度看,以太网接口电路主要由 MAC(Media Access Control,MAC)控制器和物理层接口 PHY(Physical Layer,PHY)两大部分构成。如下图所示:
商标与域名是两种具有相关联系的事物,如今商标并不是只限定于现实生活场景,商标在网络场景的出现和使用频率日益变高,在商标注册的时候,需要选择合适与理想的域名,这样营销和宣传效果会更明显,商标注册域名怎么写?商标域名注册流程是什么?
建设网站并不是一件简单的事情,在搭建网站之前需要对域名、空间以及程序等有一定程度的了解,其中注册域名时需要多花费一些时间和耐心,因为好的域名可以加深网友对网站的印象。什么叫做域名?域名的特性是什么?
分析思路是,先可以用动态分析去初步分析,然后通过静态分析走读代码再从代码层面确认。
给定一个二维平面及平面上的 N 个点列表Points,其中第i个点的坐标为Points[i]=[Xi,Yi]。 请找出一条直线,其通过的点的数目最多。
任何拥有在线资产的组织机构都需要意识到发生单点故障并不是什么好事。物联网病毒"Mirai"十月份针对某个DNS提供商的僵尸网络攻击,使我们了解到,一旦像DNS这样的业务关键性服务瘫痪,对于那些依赖在线访问或服务进行日常业务活动的机构来说可能是毁灭性的。
域名一词频繁在大众视野出现,一些创业公司想要拥有自己的网站,必定需要购买自己域名,而且一个好听易记的域名也深受大众喜爱,人们在登录网站时只需输入域名后便会跳出一系列想要查找的信息,那么具体来说域名是什么意思呢?作用有哪些?今天就来具体讲解,希望对大家有所帮助。
我相信许多朋友都在生活中有留心过许多的网址后面都有一个尾缀的标识,其实这个网址后面的标识就叫做域名。域名是什么意思?那么为什么会有域名诞生呢?其实域名就是为了方便人们在记忆IP地址的时候更加便利,同样通过dns也能够将IP地址与域名之间来进行相互映射,大家在访问互联网的时候也会更加的方便,这样大家就不用再去记忆长长的一串组成的IP地址从而才可以进行访问。
上图来自 瑞昱半导体 (RealTek) 的 RTL8201F 系列网卡 PHY 芯片手册。按OSI 7层网络模型划分,网卡PHY 芯片(图中的RTL8201F)位于物理层,对应的软件层就是本文讨论的 PHY 驱动层;而 MAC 位于 数据链路层,也是通常软件上所说的网卡驱动层,它不是本文的重点,不做展开。另外,可通过 MDIO 接口对 PHY 芯片进行配置(如PHY芯片寄存器读写),而 PHY 和 MAC 通过 MII/RMII 进行数据传输。
product info: vendor 00:50:43, model 2 rev 3
现在互联网的脚步每时每刻都在进步中,只要企业稍微的不努力,都随时会被替换掉。传统企业想要改变现状,首先制作一个属于自己的网站是至关重要的,网站的重要性就是为了客户更加全面地了解到公司,制作网站的前提就是需要一个域名,那么自己如何注册域名?
现在很多企业用的网站都是域名网站,域名网站是由顶级域名,二级域名甚至是更多级域名组成的。我们常说的com和cn就是顶级域名,而com那个点前面的就是子域名,或者可以说是二级域名。其实域名中是包含的有主机名的。那么域名中的主机名是什么?域名与主机名的关系是怎样的呢?
前言 今天在这里主要总结一下使用SSL的过程中遇到的坑(注意事项)。SSL是什么东西?(请自行搜索) 我(叫龙君)接触SSL证书已经4年了,算上今年,最开始我认为SSL证书就是拿回来安装上就可以使用的。后来发现其实不然,我们还需要去了解SSL证书信任过程和什么是信任证书链。因为大部分客户都不了解这些,购买了证书后安装使用都会出现”不信任”的问题。下面就是总结常见的5中导致SSL证书不信任的原因。 1.SSL证书不是来自公认的证书颁发机构(CA) 我们但凡了解过SSL证书的朋友都明白,我们自己就可以给自己颁发
老码农:同一道题比上次(1个月之前)功力大增,执行之间缩短了一半多,内存消耗也小了,可你怎么就这么不听话呢。。。
域名一词在科技领域十分常见,一些外行人士对其不太了解,其实简而言之域名由一系列名字构成,这些名字用点进行分隔,将网络上某台或者一组计算机串联起来,人们在进行数据传输的时候,可以用它来标记计算机具体的电子方位,为人们带来很大的便利,许多人会非常好奇域名查询如何操作?域名的作用是什么?今天就来进行具体介绍。
车载以太网的出现背景楼主就不多做赘述了,其实主要是因汽车E/E架构和功能的复杂度提升而带来的对车辆数据传输带宽提高和通讯方式改变(基于服务的通讯-SOA)的需求。
域名的com、cn、net这些都代表什么?区别是什么?哪个更好用,申请一个域名多少钱?
没有内容,只有一个附件,是一个HTML文件,俗称网页。其实这种的一看就是钓鱼或者诈骗网站,不过出于好奇,我还是想把它下下来看一下。出于安全考虑,首先看一下源码,源码如下:
书接上回,我们为大家分析了ENS是什么,有什么功能?是不是有小伙伴认为 ENS 真的就能代替 DID 了?
随着互联网网站技术越发成熟,许多个人、企业、机构等开始建立网站,但是,他们很多对网站和域名有误解,以为把网站搭建好,不用进行域名解析,网络用户就可以访问网站,等到了网站正式上线,就会发现无法访问该网站。所以,在建立网站前,我们有必要先了解下怎么做域名解析?域名解析是什么意思?
大侠好,欢迎来到FPGA技术江湖,江湖偌大,相见即是缘分。大侠可以关注FPGA技术江湖,在“闯荡江湖”、"行侠仗义"栏里获取其他感兴趣的资源,或者一起煮酒言欢。
领取专属 10元无门槛券
手把手带您无忧上云