首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >五,ESP8266 TCP服务器多连接(基于Lua脚本语言)

五,ESP8266 TCP服务器多连接(基于Lua脚本语言)

作者头像
杨奉武
发布2018-04-18 16:15:33
1.5K0
发布2018-04-18 16:15:33
举报
文章被收录于专栏:知识分享知识分享

一些时间去准备朋友的元器件了...

接着写,,争取今天写完所有的文章,,因为答应了朋友下周5之前要做好朋友的东西

对于TCP大家在玩AT指令的时候有没有发现客户端最多连接5个,,,再连接就不行了??

所以在用AT指令开发的时候单片机程序一定要记得清除多余的连接

现在看用LUA语言怎么做

直接先上菜

Init.lua

gpio.mode(4,gpio.OUTPUT)
gpio.mode(2,gpio.OUTPUT)
gpio.write(4,1)

tmr.alarm(0, 1000, 1, function()
    gpio.write(4,1-gpio.read(4))
end)

tmr.alarm(1, 1000, 0, function()
    dofile("wifi.lua")
end)

wifi.lua

wifi.setmode(wifi.STATIONAP)


cfg={}
cfg.ssid="Hellow8266"
cfg.pwd="11223344"
wifi.ap.config(cfg)


apcfg={}
apcfg.ssid="qqqqq"
apcfg.pwd="11223344"
wifi.sta.config(apcfg)
wifi.sta.connect()


TCPSever=net.createServer(net.TCP,28800) 


TcpConnectCnt = 0
TcpSocketTable={}
TCPSever:listen(8080,function(socket) 
  
    if  TcpConnectCnt == 4 then
        if  TcpSocketTable[0] ~= nil then 
            TcpSocketTable[0]:close()
            TcpSocketTable[0] = nil
        end    
    else
        if  TcpSocketTable[TcpConnectCnt+1] ~= nil then 
            TcpSocketTable[TcpConnectCnt+1]:close()
            TcpSocketTable[TcpConnectCnt+1] = nil
        end 
    end
    
    TcpSocketTable[TcpConnectCnt] = socket
    
    print(TcpConnectCnt.."-Connect")
    
    
    TcpConnectCnt = TcpConnectCnt + 1
    if  TcpConnectCnt == 5 then
        TcpConnectCnt = 0
    end
    
    
    socket:on("receive",function(socket,data) 
          uart.write(0,data) 
    end) 


    socket:on("disconnection",function(sck,c) 
        for i=0,4 do
            if  TcpSocketTable[i] == sck then
                TcpSocketTable[i] = nil
                print(i.."-Disconnect")
            end
        end
    end)
    
end)






uart.on("data",0,function(data) 


    for i=0,5 do
        if  TcpSocketTable[i] ~= nil then
            TcpSocketTable[i]:send(data)
        end
    end
        
end, 0)




printip = 0
wifi.eventmon.register(wifi.eventmon.STA_DISCONNECTED, function(T)
    printip = 0
end)




wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function(T)
   if printip == 0 then
      print("+IP"..T.IP)
   end
   printip = 1
end)

下面看解释.............

wifi.setmode(wifi.STATIONAP)--模式AP+STATION就不说了

cfg={}
cfg.ssid="Hellow8266"
cfg.pwd="11223344"
wifi.ap.config(cfg)--设置模块的无线和密码

apcfg={}
apcfg.ssid="qqqqq"
apcfg.pwd="11223344"
wifi.sta.config(apcfg)--设置模块连接路由器的无线和密码

--wifi.sta.connect()连接路由器,断开后可能就不自动连接了,可以用下面的
wifi.sta.autoconnect(1)可以用这个断开后自动连接路由器




TCPSever=net.createServer(net.TCP,28800) --创建服务器超过28800S不通信断开已有的连接

TcpConnectCnt = 0--连接个数计数
TcpSocketTable={}--存储socket
TCPSever:listen(8080,function(socket) 

    如果0号连接就把1号关掉,,,1号连接就把2号关掉....4号连接就把0号关掉,这样子循环,
    当然您会问可以连接5个,,这样子只可以连接四个了,,,为什么....因为如果连接了5个就进不
    来这个监听函数了.......所以必须留下一个空位
    
    if  TcpConnectCnt == 4 then
        if  TcpSocketTable[0] ~= nil then 
            TcpSocketTable[0]:close()
            TcpSocketTable[0] = nil
        end    
   else
        if  TcpSocketTable[TcpConnectCnt+1] ~= nil then 
            TcpSocketTable[TcpConnectCnt+1]:close()
            TcpSocketTable[TcpConnectCnt+1] = nil
        end 
   end

    TcpSocketTable[TcpConnectCnt] = socket--把连接的socket存到数组

    
    print(TcpConnectCnt.."-Connect")--打印几号连接了  对了 .. 是连接符
    
    
    TcpConnectCnt = TcpConnectCnt + 1--连接个数加一
    if  TcpConnectCnt == 5 then --归零
        TcpConnectCnt = 0
    end
    
    
    socket:on("receive",function(socket,data) 
          uart.write(0,data) --把接收到的数据发到串口
    end) 

    socket:on("disconnection",function(sck,c) 
        for i=0,4 do --判断是哪个断开了连接,,就把对应的socket变量置为 nil
            if  TcpSocketTable[i] == sck then
                TcpSocketTable[i] = nil
                print(i.."-Disconnect")
            end
        end
    end)
    
end)



uart.on("data",0,function(data) 

    for i=0,4 do  --把串口的数据发向不为 nil 的连接
        if  TcpSocketTable[i] ~= nil then
            TcpSocketTable[i]:send(data)
        end
    end
        
end, 0)

--下面是连接路由器和没有连接路由器的监听函数,,好像是1S检测一次
printip = 0
wifi.eventmon.register(wifi.eventmon.STA_DISCONNECTED, function(T)
    printip = 0
end)


wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function(T)
   if printip == 0 then
      print("+IP"..T.IP)
   end
   printip = 1
end)

现在把程序下进去

测试软件呢在这里下载--也可以自己下载个网络调试助手

https://item.taobao.com/item.htm?spm=686.1000925.0.0.4a155084jlU4Rd&id=558508797404

 连接了路由器了....

 第一个连接

 测试数据

 再来几个连接

 现在再连接一个

 我现在随意断开一个,看一看串口应该打印哪一个断开了连接

 现在发数据

 好现在呢控制就用多个客户端控制继电器

控制的指令呢咱就配置成----

http://www.cnblogs.com/yangfengwu/p/7513097.html

这篇文章最后的指令,,毕竟最终咱们就要做成那样子.....这样的话8266就应该使用的非常顺手和轻松了

对了在

http://www.cnblogs.com/yangfengwu/p/7520260.html

http://www.cnblogs.com/yangfengwu/p/7524326.html

这篇两文章中有提及......这次是用多个TCP客户端控制,,还会加上CRC校验

可以直接用软件上的这两个按钮控制

先写不带CRC校验数据的

为了是程序好浏览,,就定义一个函数,,然后调用

现在的wifi.lua

wifi.setmode(wifi.STATIONAP)

cfg={}
cfg.ssid="Hellow8266"
cfg.pwd="11223344"
wifi.ap.config(cfg)

apcfg={}
apcfg.ssid="qqqqq"
apcfg.pwd="11223344"
wifi.sta.config(apcfg)
wifi.sta.connect()

TCPSever=net.createServer(net.TCP,28800) 

TcpConnectCnt = 0
TcpSocketTable={}

TCPSever:listen(8080,function(socket) 
  
    if  TcpConnectCnt == 4 then
        if  TcpSocketTable[0] ~= nil then 
            TcpSocketTable[0]:close()
            TcpSocketTable[0] = nil
        end    
    else
        if  TcpSocketTable[TcpConnectCnt+1] ~= nil then 
            TcpSocketTable[TcpConnectCnt+1]:close()
            TcpSocketTable[TcpConnectCnt+1] = nil
        end 
    end
    
    TcpSocketTable[TcpConnectCnt] = socket
    
    print(TcpConnectCnt.."-Connect")
    
    
    TcpConnectCnt = TcpConnectCnt + 1
    if  TcpConnectCnt == 5 then
        TcpConnectCnt = 0
    end
    
    
    socket:on("receive",function(socket,data) 
          uart.write(0,data) 
          control(data)
    end) 

    socket:on("disconnection",function(sck,c) 
        for i=0,4 do
            if  TcpSocketTable[i] == sck then
                TcpSocketTable[i] = nil
                print(i.."-Disconnect")
            end
        end
    end)
    
end)


function control(data)  
    if  data == "++MD610" then
        gpio.write(2,1)
        print("Relay=1")
    end
    if  data == "++MD600" then
        gpio.write(2,0)
        print("Relay=0")
    end
end  


uart.on("data",0,function(data) 

    for i=0,4 do
        if  TcpSocketTable[i] ~= nil then
            TcpSocketTable[i]:send(data)
        end
    end
        
end, 0)


printip = 0
wifi.eventmon.register(wifi.eventmon.STA_DISCONNECTED, function(T)
    printip = 0
end)


wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function(T)
   if printip == 0 then
      print("+IP"..T.IP)
   end
   printip = 1
end)

 好现在控制一下

现在用另一个断开

对了最好把信息发给网络对不对,,,控制一下最好通过网络有一个回复

现在的wifi.lua

wifi.setmode(wifi.STATIONAP)

cfg={}
cfg.ssid="Hellow8266"
cfg.pwd="11223344"
wifi.ap.config(cfg)

apcfg={}
apcfg.ssid="qqqqq"
apcfg.pwd="11223344"
wifi.sta.config(apcfg)
wifi.sta.connect()

TCPSever=net.createServer(net.TCP,28800) 

TcpConnectCnt = 0
TcpSocketTable={}
NowSocket=nil
TCPSever:listen(8080,function(socket) 
  
    if  TcpConnectCnt == 4 then
        if  TcpSocketTable[0] ~= nil then 
            TcpSocketTable[0]:close()
            TcpSocketTable[0] = nil
        end    
    else
        if  TcpSocketTable[TcpConnectCnt+1] ~= nil then 
            TcpSocketTable[TcpConnectCnt+1]:close()
            TcpSocketTable[TcpConnectCnt+1] = nil
        end 
    end
    
    TcpSocketTable[TcpConnectCnt] = socket
    
    print(TcpConnectCnt.."-Connect")
    
    
    TcpConnectCnt = TcpConnectCnt + 1
    if  TcpConnectCnt == 5 then
        TcpConnectCnt = 0
    end
    
    
    socket:on("receive",function(socket,data) 
          NowSocket = socket
          uart.write(0,data) 
          control(data)
    end) 

    socket:on("disconnection",function(sck,c) 
        for i=0,4 do
            if  TcpSocketTable[i] == sck then
                TcpSocketTable[i] = nil
                print(i.."-Disconnect")
            end
        end
    end)
    
end)


function control(data)  
    if  data == "++MD610" then
        gpio.write(2,1)
        print("Relay=1")
        if  NowSocket ~= nil then
            NowSocket:send("Relay=1")
            NowSocket = nil
        end
    end
    if  data == "++MD600" then
        gpio.write(2,0)
        print("Relay=0")
        if  NowSocket ~= nil then
            NowSocket:send("Relay=0")
            NowSocket = nil
        end
    end
end  


uart.on("data",0,function(data) 

    for i=0,4 do
        if  TcpSocketTable[i] ~= nil then
            TcpSocketTable[i]:send(data)
        end
    end
        
end, 0)


printip = 0
wifi.eventmon.register(wifi.eventmon.STA_DISCONNECTED, function(T)
    printip = 0
end)


wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function(T)
   if printip == 0 then
      print("+IP"..T.IP)
   end
   printip = 1
end)

好了现在加入CRC16校验数据

现在的wifi.lua

wifi.setmode(wifi.STATIONAP)

cfg={}
cfg.ssid="Hellow8266"
cfg.pwd="11223344"
wifi.ap.config(cfg)

apcfg={}
apcfg.ssid="qqqqq"
apcfg.pwd="11223344"
wifi.sta.config(apcfg)
wifi.sta.connect()

TCPSever=net.createServer(net.TCP,28800) 

TcpConnectCnt = 0
TcpSocketTable={}
NowSocket=nil
TCPSever:listen(8080,function(socket) 
  
    if  TcpConnectCnt == 4 then
        if  TcpSocketTable[0] ~= nil then 
            TcpSocketTable[0]:close()
            TcpSocketTable[0] = nil
        end    
    else
        if  TcpSocketTable[TcpConnectCnt+1] ~= nil then 
            TcpSocketTable[TcpConnectCnt+1]:close()
            TcpSocketTable[TcpConnectCnt+1] = nil
        end 
    end
    
    TcpSocketTable[TcpConnectCnt] = socket
    
    print(TcpConnectCnt.."-Connect")
    
    
    TcpConnectCnt = TcpConnectCnt + 1
    if  TcpConnectCnt == 5 then
        TcpConnectCnt = 0
    end
    
    
    socket:on("receive",function(socket,data) 
          NowSocket = socket
          uart.write(0,data) 
          control(data)
    end) 

    socket:on("disconnection",function(sck,c) 
        for i=0,4 do
            if  TcpSocketTable[i] == sck then
                TcpSocketTable[i] = nil
                print(i.."-Disconnect")
            end
        end
    end)
    
end)


function control(data)  
    local RevLen = string.len (data)
    local crc = ow.crc16(string.sub(data,1,RevLen-2))
    
    local recrc = data:byte(RevLen)
    local recrc = recrc*256
    local recrc = recrc + data:byte(RevLen-1)

    if  crc == recrc then
        if  string.sub(data,1,7) == "++MD610" then
            gpio.write(2,1)
            print("Relay=1")
            if  NowSocket ~= nil then
                NowSocket:send("Relay=1")
                NowSocket = nil
            end
        end
        if  string.sub(data,1,7) == "++MD600" then
            gpio.write(2,0)
            print("Relay=0")
            if  NowSocket ~= nil then
                NowSocket:send("Relay=0")
                NowSocket = nil
            end
        end
    else
        if  NowSocket ~= nil then
                NowSocket:send("CRC16 Faild")
                NowSocket = nil
        end   
    end       

    
end  


uart.on("data",0,function(data) 

    for i=0,4 do
        if  TcpSocketTable[i] ~= nil then
            TcpSocketTable[i]:send(data)
        end
    end
        
end, 0)


printip = 0
wifi.eventmon.register(wifi.eventmon.STA_DISCONNECTED, function(T)
    printip = 0
end)


wifi.eventmon.register(wifi.eventmon.STA_GOT_IP, function(T)
   if printip == 0 then
      print("+IP"..T.IP)
   end
   printip = 1
end)

他呢,,参数要填写字符串

上位机的CRC计算函数

/// <CRC  效验  >
        /// 
        /// </summary>
        /// <param name="modbusdata"></param>
        /// <param name="length"></param>
        /// <returns></returns>
        private int crc16_modbus(byte[] modbusdata, int length)
        {
            int i, j;

            int crc = 0x0;

            try
            {
                for (i = 0; i < length; i++)
                {
                    crc ^= modbusdata[i];
                    for (j = 0; j < 8; j++)
                    {
                        if ((crc & 0x01) == 1)
                        {
                            crc = (crc >> 1) ^ 0xa001;
                        }
                        else
                        {
                            crc >>= 1;
                        }
                    }
                }
            }
            catch (Exception)
            {

                throw;
            }

            return crc;
        }

我的置高继电器函数

private void button7_Click_1(object sender, EventArgs e)
        {
            byte[] sendbyte = new byte[7];
            sendbyte[0] = (byte)'+';//2B
            sendbyte[1] = (byte)'+';
            sendbyte[2] = (byte)'M';//4D
            sendbyte[3] = (byte)'D';//44
            sendbyte[4] = (byte)'6';//6
            sendbyte[5] = (byte)'1';//1

            if (comboBox3.Text=="继电器")//pin2
            {
                sendbyte[6] = (byte)'0';
            }
            else if (comboBox3.Text == "CS")//pin8
            {
                sendbyte[6] = (byte)'1';
            }
            else if (comboBox3.Text == "MOSI")//pin7
            {
                sendbyte[6] = (byte)'2';
            }
            else if (comboBox3.Text == "MISO")//pin6
            {
                sendbyte[6] = (byte)'3';
            }
            else if (comboBox3.Text == "CLK")//pin5
            {
                sendbyte[6] = (byte)'4';
            }
            if (radioButtonNetCon.Checked)//网络发送
            {
                TcpSendDataMethod(sendbyte);
            }
            else if (radioButtonSerialCon.Checked)//串口发送
            {
                SerialSend(sendbyte);
            }
        }
/// <TCP发送数据>
        /// 
        /// </summary>
        /// <param name="byt"></param>
        private void TcpSendDataMethod(byte[] byt)
        {
            int crc = 0;

            byte[] sendbyte = new byte[byt.Length + 2];

            for (int i = 0; i < byt.Length; i++)
            {
                sendbyte[i] = byt[i];
            }

            crc = crc16_modbus(byt, byt.Length);//计算CRC
            byte[] Crcbyte = System.BitConverter.GetBytes(crc);//得到CRC

            sendbyte[sendbyte.Length - 2] = Crcbyte[0];
            sendbyte[sendbyte.Length - 1] = Crcbyte[1];

            try { networkstrem.Write(sendbyte, 0, sendbyte.Length); }
            catch (Exception) { MessageBox.Show("请检查连接", "提示!"); }
        }

还要说一点让8266计算CRC,发现8266存储数据是大端模式......

好了现在测试一下用软件的按钮控制

好啦终于这完这一篇了....累..真心的累.............

本文参与 腾讯云自媒体分享计划,分享自作者个人站点/博客。
原始发表:2017-09-16 ,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档