Python netsnmp oid

CPU Statistics

Load 1 minute Load: .1.3.6.1.4.1.2021.10.1.3.1 5 minute Load: .1.3.6.1.4.1.2021.10.1.3.2 15 minute Load: .1.3.6.1.4.1.2021.10.1.3.3

CPU percentage of user CPU time: .1.3.6.1.4.1.2021.11.9.0 raw user cpu time: .1.3.6.1.4.1.2021.11.50.0 percentages of system CPU time: .1.3.6.1.4.1.2021.11.10.0 raw system cpu time: .1.3.6.1.4.1.2021.11.52.0 percentages of idle CPU time: .1.3.6.1.4.1.2021.11.11.0 raw idle cpu time: .1.3.6.1.4.1.2021.11.53.0 raw nice cpu time: .1.3.6.1.4.1.2021.11.51.0

cpu number: .1.3.6.1.2.1.25.3.2

Memory Statistics

Total Swap Size: .1.3.6.1.4.1.2021.4.3.0 UCD-SNMP-MIB::memTotalSwap.0 = INTEGER: 489940 kB  

Available Swap Space: .1.3.6.1.4.1.2021.4.4.0 UCD-SNMP-MIB::memAvailSwap.0 = INTEGER: 284752 kB

Total RAM in machine: .1.3.6.1.4.1.2021.4.5.0 UCD-SNMP-MIB::memTotalReal.0 = INTEGER: 255672 kB

The available real memory: .1.3.6.1.4.1.2021.4.6.0 UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 14456 kB

the Total free memory in the machine (free Swap memory + free RAM memory): .1.3.6.1.4.1.2021.4.11.0

UCD-SNMP-MIB::memTotalFree.0 = INTEGER: 298804 kB

Total RAM Shared: .1.3.6.1.4.1.2021.4.13.0 UCD-SNMP-MIB::memShared.0 = INTEGER: 0 kB

Total RAM Buffered: .1.3.6.1.4.1.2021.4.14.0 UCD-SNMP-MIB::memBuffer.0 = INTEGER: 2888 kB

Total Cached Memory: .1.3.6.1.4.1.2021.4.15.0 UCD-SNMP-MIB::memCached.0 = INTEGER: 47816 kB

Disk Statistics

The snmpd.conf needs to be edited. Add the following (assuming a machine with a single ‘/’ partition):

disk / 100000 (or)

includeAllDisks 10% for all partitions and disks

The OIDs are as follows

Path where the disk is mounted: .1.3.6.1.4.1.2021.9.1.2.1 Path of the device for the partition: .1.3.6.1.4.1.2021.9.1.3.1 Total size of the disk/partion (kBytes): .1.3.6.1.4.1.2021.9.1.6.1 Available space on the disk: .1.3.6.1.4.1.2021.9.1.7.1 Used space on the disk: .1.3.6.1.4.1.2021.9.1.8.1 Percentage of space used on disk: .1.3.6.1.4.1.2021.9.1.9.1 Percentage of inodes used on disk: .1.3.6.1.4.1.2021.9.1.10.1

System Uptime: .1.3.6.1.2.1.1.3.0

python snmp 从OID获取对应的值

先安装模块 netsnmp

import netsnmp
session = netsnmp.Session( DestHost='your.host.com', Version=2, Community='public' )
vars = netsnmp.VarList( netsnmp.Varbind(oid) )
print( session.get(vars) )