ns模拟3

# Define options set val(chan)           Channel/WirelessChannel    ;# channel type set val(prop)           Propagation/TwoRayGround   ;# radio-propagation model set val(netif)          Phy/WirelessPhy            ;# network interface type set val(mac)            Mac/802_11                 ;# MAC type set val(ifq)            Queue/DropTail/PriQueue    ;# interface queue type set val(ll)             LL                         ;# link layer type set val(ant)            Antenna/OmniAntenna        ;# antenna model set val(ifqlen)         50                         ;# max packet in ifq set val(nn)             8                          ;# number of mobilenodes set val(rp)             AODV                       ;# routing protocol set val(x)              1200                              ;# X dimension of topography set val(y)              1200                              ;# Y dimension of topography   set val(stop)            2                           ;# time of simulation end set ns                  [new Simulator] set tracefd       [open simple.tr w] set namtrace      [open simwrls.nam w]    $ns trace-all $tracefd $ns namtrace-all-wireless $namtrace $val(x) $val(y) #set different colors for data flows $ns color 0 Blue $ns color 1 Red # set up topography object set topo       [new Topography] $topo load_flatgrid $val(x) $val(y) set chan_1 [new $val(chan)] create-god $val(nn) # #  Create nn mobilenodes [$val(nn)] and attach them to the channel. # # configure the nodes         $ns node-config -adhocRouting $val(rp) \                          -llType $val(ll) \                          -macType $val(mac) \                          -ifqType $val(ifq) \                          -ifqLen $val(ifqlen) \                          -antType $val(ant) \                          -propType $val(prop) \                          -phyType $val(netif) \                          -channel $chan_1 \                          -topoInstance $topo \                          -agentTrace ON \                          -routerTrace ON \                          -macTrace ON \                          -movementTrace OFF set node_(0) [$ns node] $node_(0) color black set node_(1) [$ns node] $node_(1) color black $ns at 0.0 "$node_(0) color red" $ns at 0.0 "$node_(1) color red" $node_(0) set X_ 370.71 $node_(0) set Y_ 270.71 $node_(0) set Z_ 0.0 $node_(1) set X_ 529.29 $node_(1) set Y_ 429.29 $node_(1) set Z_ 0.0 Phy/WirelessPhy set Pt_ 7.214e-3 set chan_2 [new $val(chan)] $ns node-config \     -channel $chan_2 for {set i 2} {$i <= 8 } { incr i } { set node_($i) [$ns node]        } # Provide initial location of mobilenodes  for {set i 2} {$i <= 8 } { incr i } {     if {$i<=5} {         $node_($i) set X_ [expr 200.0+($i-1)*100.0]         $node_($i) set Y_ 200     } else {         $node_($i) set X_ 600         $node_($i) set Y_ [expr 200+($i-5)*100.0]     }         $node_($i) set Z_ 0.0  } # Generation of movements $ns at 110.0 "$node_(0) setdest 124.0 272.0 30.0" $ns at 110.0 "$node_(1) setdest 45.0 285.0 50.0" $ns at 110.0 "$node_(0) setdest 480.0 300.0 5.0" # Set a TCP connection between node_(0) and node_(1) set tcp [new Agent/TCP/Newreno] $tcp set class_ 2 set sink [new Agent/TCPSink] $ns attach-agent $node_(0) $tcp $ns attach-agent $node_(1) $sink $ns connect $tcp $sink set ftp [new Application/FTP] $ftp attach-agent $tcp $ftp set fid_ 1 $ns at 0.3 "$ftp start" # Define node initial position in nam for {set i 0} {$i <= $val(nn)} { incr i } { # 30 defines the node size for nam $ns initial_node_pos $node_($i) 30 } # Telling nodes when the simulation ends for {set i 0} {$i < $val(nn) } { incr i } {     $ns at $val(stop) "$node_($i) reset"; } # ending nam and the simulation $ns at $val(stop) "$ns nam-end-wireless $val(stop)" $ns at $val(stop) "stop" $ns at 2.01 "puts \"end simulation\" ; $ns halt" proc stop {} {     global ns tracefd namtrace     $ns flush-trace     close $tracefd     close $namtrace     exec nam simwrls.nam & } $ns run