专栏首页sunsky史上最全的vim快捷键文档/手册/大全/帮助/指南

史上最全的vim快捷键文档/手册/大全/帮助/指南

版本一

版本二

版本三

版本四

版本五

版本六

Global

  • :h[elp] keyword - open help for keyword
  • :sav[eas] file - save file as
  • :clo[se] - close current pane
  • :ter[minal] - open a terminal window
  • K - open man page for word under the cursor

Tip Run vimtutor in a terminal to learn the first Vim commands.

Cursor movement

  • h - move cursor left
  • j - move cursor down
  • k - move cursor up
  • l - move cursor right
  • H - move to top of screen
  • M - move to middle of screen
  • L - move to bottom of screen
  • w - jump forwards to the start of a word
  • W - jump forwards to the start of a word (words can contain punctuation)
  • e - jump forwards to the end of a word
  • E - jump forwards to the end of a word (words can contain punctuation)
  • b - jump backwards to the start of a word
  • B - jump backwards to the start of a word (words can contain punctuation)
  • % - move to matching character (default supported pairs: '()', '{}', '[]' - use :h matchpairs in vim for more info)
  • 0 - jump to the start of the line
  • ^ - jump to the first non-blank character of the line
  • $ - jump to the end of the line
  • g_ - jump to the last non-blank character of the line
  • gg - go to the first line of the document
  • G - go to the last line of the document
  • 5gg or 5G - go to line 5
  • fx - jump to next occurrence of character x
  • tx - jump to before next occurrence of character x
  • Fx - jump to previous occurence of character x
  • Tx - jump to after previous occurence of character x
  • ; - repeat previous f, t, F or T movement
  • , - repeat previous f, t, F or T movement, backwards
  • } - jump to next paragraph (or function/block, when editing code)
  • { - jump to previous paragraph (or function/block, when editing code)
  • zz - center cursor on screen
  • Ctrl + e - move screen down one line (without moving cursor)
  • Ctrl + y - move screen up one line (without moving cursor)
  • Ctrl + b - move back one full screen
  • Ctrl + f - move forward one full screen
  • Ctrl + d - move forward 1/2 a screen
  • Ctrl + u - move back 1/2 a screen

Tip Prefix a cursor movement command with a number to repeat it. For example, 4j moves down 4 lines.

Insert mode - inserting/appending text

  • i - insert before the cursor
  • I - insert at the beginning of the line
  • a - insert (append) after the cursor
  • A - insert (append) at the end of the line
  • o - append (open) a new line below the current line
  • O - append (open) a new line above the current line
  • ea - insert (append) at the end of the word
  • Ctrl + h - delete the character before the cursor during insert mode
  • Ctrl + w - delete word before the cursor during insert mode
  • Ctrl + j - begin new line during insert mode
  • Ctrl + t - indent (move right) line one shiftwidth during insert mode
  • Ctrl + d - de-indent (move left) line one shiftwidth during insert mode
  • Ctrl + n - insert (auto-complete) next match before the cursor during insert mode
  • Ctrl + p - insert (auto-complete) previous match before the cursor during insert mode
  • Esc - exit insert mode

Editing

  • r - replace a single character
  • J - join line below to the current one with one space in between
  • gJ - join line below to the current one without space in between
  • gwip - reflow paragraph
  • g~ - switch case up to motion
  • gu - change to lowercase up to motion
  • gU - change to uppercase up to motion
  • cc - change (replace) entire line
  • C - change (replace) to the end of the line
  • c$ - change (replace) to the end of the line
  • ciw - change (replace) entire word
  • cw - change (replace) to the end of the word
  • s - delete character and substitute text
  • S - delete line and substitute text (same as cc)
  • xp - transpose two letters (delete and paste)
  • u - undo
  • U - restore (undo) last changed line
  • Ctrl + r - redo
  • . - repeat last command

Marking text (visual mode)

  • v - start visual mode, mark lines, then do a command (like y-yank)
  • V - start linewise visual mode
  • o - move to other end of marked area
  • Ctrl + v - start visual block mode
  • O - move to other corner of block
  • aw - mark a word
  • ab - a block with ()
  • aB - a block with {}
  • at - a block with <> tags
  • ib - inner block with ()
  • iB - inner block with {}
  • it - inner block with <> tags
  • Esc - exit visual mode

Tip Instead of b or B one can also use ( or { respectively.

Visual commands

  • > - shift text right
  • < - shift text left
  • y - yank (copy) marked text
  • d - delete marked text
  • ~ - switch case
  • u - change marked text to lowercase
  • U - change marked text to uppercase

Registers

  • :reg[isters] - show registers content
  • "xy - yank into register x
  • "xp - paste contents of register x
  • "+y - yank into the system clipboard register
  • "+p - paste from the system clipboard register

Tip Registers are being stored in ~/.viminfo, and will be loaded again on next restart of vim.

Tip Special registers:

0 - last yank " - unnamed register, last delete or yank % - current file name # - alternate file name * - clipboard contents (X11 primary) + - clipboard contents (X11 clipboard) / - last search pattern : - last command-line . - last inserted text - - last small (less than a line) delete = - expression register _ - black hole register

Marks and positions

  • :marks - list of marks
  • ma - set current position for mark A
  • `a - jump to position of mark A
  • y`a - yank text to position of mark A
  • `0 - go to the position where Vim was previously exited
  • `" - go to the position when last editing this file
  • `. - go to the position of the last change in this file
  • `` - go to the position before the last jump
  • :ju[mps] - list of jumps
  • Ctrl + i - go to newer position in jump list
  • Ctrl + o - go to older position in jump list
  • :changes - list of changes
  • g, - go to newer position in change list
  • g; - go to older position in change list
  • Ctrl + ] - jump to the tag under cursor

Tip To jump to a mark you can either use a backtick (`) or an apostrophe ('). Using an apostrophe jumps to the beginning (first non-black) of the line holding the mark.

Macros

  • qa - record macro a
  • q - stop recording macro
  • @a - run macro a
  • @@ - rerun last run macro

Cut and paste

  • yy - yank (copy) a line
  • 2yy - yank (copy) 2 lines
  • yw - yank (copy) the characters of the word from the cursor position to the start of the next word
  • y$ - yank (copy) to end of line
  • p - put (paste) the clipboard after cursor
  • P - put (paste) before cursor
  • dd - delete (cut) a line
  • 2dd - delete (cut) 2 lines
  • dw - delete (cut) the characters of the word from the cursor position to the start of the next word
  • D - delete (cut) to the end of the line
  • d$ - delete (cut) to the end of the line
  • x - delete (cut) character

Indent text

  • >> - indent (move right) line one shiftwidth
  • << - de-indent (move left) line one shiftwidth
  • >% - indent a block with () or {} (cursor on brace)
  • >ib - indent inner block with ()
  • >at - indent a block with <> tags
  • 3== - re-indent 3 lines
  • =% - re-indent a block with () or {} (cursor on brace)
  • =iB - re-indent inner block with {}
  • gg=G - re-indent entire buffer
  • ]p - paste and adjust indent to current line

Exiting

  • :w - write (save) the file, but don't exit
  • :w !sudo tee % - write out the current file using sudo
  • :wq or :x or ZZ - write (save) and quit
  • :q - quit (fails if there are unsaved changes)
  • :q! or ZQ - quit and throw away unsaved changes
  • :wqa - write (save) and quit on all tabs

Search and replace

  • /pattern - search for pattern
  • ?pattern - search backward for pattern
  • \vpattern - 'very magic' pattern: non-alphanumeric characters are interpreted as special regex symbols (no escaping needed)
  • n - repeat search in same direction
  • N - repeat search in opposite direction
  • :%s/old/new/g - replace all old with new throughout file
  • :%s/old/new/gc - replace all old with new throughout file with confirmations
  • :noh[lsearch] - remove highlighting of search matches

Search in multiple files

  • :vim[grep] /pattern/ {`{file}`} - search for pattern in multiple files

e.g. :vim[grep] /foo/ **/*

  • :cn[ext] - jump to the next match
  • :cp[revious] - jump to the previous match
  • :cope[n] - open a window containing the list of matches
  • :ccl[ose] - close the quickfix window

Tabs

  • :tabnew or :tabnew {page.words.file} - open a file in a new tab
  • Ctrl + wT - move the current split window into its own tab
  • gt or :tabn[ext] - move to the next tab
  • gT or :tabp[revious] - move to the previous tab
  • #gt - move to tab number #
  • :tabm[ove] # - move current tab to the #th position (indexed from 0)
  • :tabc[lose] - close the current tab and all its windows
  • :tabo[nly] - close all tabs except for the current one
  • :tabdo command - run the command on all tabs (e.g. :tabdo q - closes all opened tabs)

Working with multiple files

  • :e[dit] file - edit a file in a new buffer
  • :bn[ext] or :bn - go to the next buffer
  • :bp[revious] or :bp - go to the previous buffer
  • :bd[elete] - delete a buffer (close a file)
  • :b# - go to a buffer by #
  • :b file - go to a buffer by file
  • :ls - list all open buffers
  • :sp[lit] file - open a file in a new buffer and split window
  • :vs[plit] file - open a file in a new buffer and vertically split window
  • :vert[ical] ba[ll] - edit all buffers as vertical windows
  • :tab ba[ll] - edit all buffers as tabs
  • Ctrl + ws - split window
  • Ctrl + wv - split window vertically
  • Ctrl + ww - switch windows
  • Ctrl + wq - quit a window
  • Ctrl + wx - exchange current window with next one
  • Ctrl + w= - make all windows equal height & width
  • Ctrl + wh - move cursor to the left window (vertical split)
  • Ctrl + wl - move cursor to the right window (vertical split)
  • Ctrl + wj - move cursor to the window below (horizontal split)
  • Ctrl + wk - move cursor to the window above (horizontal split)

Diff

  • zf - manually define a fold up to motion
  • zd - delete fold under the cursor
  • za - toggle fold under the cursor
  • zo - open fold under the cursor
  • zc - close fold under the cursor
  • zr - reduce (open) all folds by one level
  • zm - fold more (close) all folds by one level
  • zi - toggle folding functionality
  • ]c - jump to start of next change
  • [c - jump to start of previous change
  • do or :diffg[et] - obtain (get) difference (from other buffer)
  • dp or :diffpu[t] - put difference (to other buffer)
  • :diffthis - make current window part of diff
  • :dif[fupdate] - update differences
  • :diffo[ff] - switch off diff mode for current window

Tip The commands for folding (e.g. za) operate on one level. To operate on all levels, use uppercase letters (e.g. zA).

Tip To view the differences of files, one can directly start Vim in diff mode by running vimdiff in a terminal. One can even set this as git difftool.

References

  1. Graphical vi-vim Cheat Sheet and Tutorial
  2. VIM Quick reference card
  3. VIM Quick reference card
  4. a mobile friendly vim cheat sheet
  5. Vim Commands Cheat Sheet
  6. vim cheat sheet for programmers
  7. Vi Cheat Sheet
  8. https://vim.rtorr.com/lang/zh_cn

本文参与腾讯云自媒体分享计划,欢迎正在阅读的你也加入,一起分享。

我来说两句

0 条评论
登录 后参与评论

相关文章

  • Lua 5.1 参考手册

    Lua 是一个扩展式程序设计语言,它被设计成支持通用的过程式编程,并有相关数据描述的设施。 Lua 也能对面向对象编程,函数式编程,数据驱动式编程提供很好的支持...

    sunsky
  • saltstack手册(含官方pdf)

    https://docs.saltstack.com/en/pdf/Salt-2019.2.1.pdf

    sunsky
  • 数学问题:1000瓶酒找1毒酒

    某酒主人要宴请客人,他共有1000瓶酒,其中1瓶有毒。一旦喝了毒酒后,会在一周后发作,现在如果我们用试纸进行检测,滴了毒酒

    sunsky
  • 双语 | 数据科学家抢了经济学家的饭碗吗?

    实在不好意思亲!大猫由于最近论文与工作的压力,R语言课堂更新有点拖(但愿不是有生之年系列Orz)。今天更新的这篇和R没有太大关系,但却讨论了一个很有意思的问题:...

    用户7652506
  • Udacity-Machine Learning纳米学位-学习笔记1

    课程地址 Category: Machine Learning    Artificial Intelligence    Data Science   ...

    杨熹
  • 用于任务感知的持续学习的条件通道门控网络(CS.CV)

    当针对一系列学习问题进行优化时,卷积神经网络会遭受灾难性的遗忘:当它们满足当前训练示例的目标时,它们在先前任务上的表现将急剧下降。在这项工作中,我们引入了一个新...

    蔡小雪7100294
  • 从别人的错误中吸取教训:绕过制造偏置模型来避免数据集偏差(CS CL)

    最先进的自然语言处理(NLP)模型通常学习建模数据集偏差和表面形式关联,而不是针对预期底层任务的特性。以前的工作已经证明了在已知偏差的情况下规避这些问题的有效方...

    谭雪儿
  • Codeforce 1102 C. Doors Breaking and Repairing

    You are policeman and you are playing a game with Slavik. The game is turn-based...

    风骨散人Chiam
  • 用于任务感知的持续学习的条件通道门控网络(CS.CV)

    当针对一系列学习问题进行优化时,卷积神经网络会遭受灾难性的遗忘:当它们满足当前训练示例的目标时,它们在先前任务上的表现将急剧下降。在这项工作中,我们引入了一个新...

    蔡小雪7100294
  • uva-----11292 The Dragon of Loowater

    Problem C: The Dragon of Loowater Once upon a time, in the Kingdom of Loowater, ...

    Gxjun

扫码关注云+社区

领取腾讯云代金券