CentOS 7下部署php7.1和开启MySQL扩展的方法教程

[root@opstrip.com opt]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
[root@opstrip.com opt]# rpm -Uvh http://mirrors.rit.edu/fedora/epel//7/x86_64/e/epel-release-7-9.noarch.rpm

[root@opstrip.com opt]# rpm -Uvh http://rpms.remirepo.net/enterprise/remi-release-7.rpm

[root@opstrip.com opt]# yum -y install yum-utils

[root@opstrip.com opt]# yum -y update

[root@opstrip.com opt]# yum -y install php

[root@opstrip.com opt]# yum-config-manager --enable remi-php70
[root@opstrip.com opt]# yum -y install php php-opcache

[root@opstrip.com opt]# yum-config-manager --enable remi-php71
[root@opstrip.com opt]# yum -y install php php-opcache

[root@opstrip.com opt]# yum -y install php-mysql php-gd php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-soap curl curl-devel

[root@opstrip.com opt]# yum -y install nginx nginx-mod-http-perl nginx-mod-stream nginx-filesystem nginx-mod-mail nginx-mod-http-image-filter nginx-all-modules nginx-mod-http-geoip nginx-mod-http-xslt-filter

[root@opstrip.com opt]# wget -O php-7.1.5.tar.gz http://cn2.php.net/distributions/php-7.1.5.tar.gz

[root@opstrip.com opt]# tar xf php-7.1.5.tar.gz

[root@opstrip.com php-7.1.5]# yum install -y libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl libcurl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel

[root@opstrip.com opt]# cd php-7.1.5
[root@opstrip.com php-7.1.5]# ./configure \
--prefix=/usr/local/php \
--with-config-file-path=/etc \
--enable-fpm \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-soap \
--with-libxml-dir \
--with-xmlrpc \
--with-openssl \
--with-mcrypt \
--with-mhash \
--with-pcre-regex \
--with-sqlite3 \
--with-zlib \
--enable-bcmath \
--with-iconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--with-cdb \
--enable-dom \
--enable-exif \
--enable-fileinfo \
--enable-filter \
--with-pcre-dir \
--enable-ftp \
--with-gd \
--with-openssl-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib-dir \
--with-freetype-dir \
--enable-gd-native-ttf \
--enable-gd-jis-conv \
--with-gettext \
--with-gmp \
--with-mhash \
--enable-json \
--enable-mbstring \
--enable-mbregex \
--enable-mbregex-backtrack \
--with-libmbfl \
--with-onig \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-zlib-dir \
--with-pdo-sqlite \
--with-readline \
--enable-session \
--enable-shmop \
--enable-simplexml \
--enable-sockets \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-wddx \
--with-libxml-dir \
--with-xsl \
--enable-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-opcache

[root@opstrip.com php-7.1.5]# make && make install

[root@opstrip.com php-7.1.5]# php -v
PHP 7.1.5 (cli) (built: May 31 2017 16:12:38) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies

[root@opstrip.com php-7.1.5]# mkdir -p /etc/php-fpm.d
[root@opstrip.com php-7.1.5]# cp php.ini-production /etc/php.ini
[root@opstrip.com php-7.1.5]# cp sapi/fpm/php-fpm.service /usr/lib/systemd/system/
[root@opstrip.com php-7.1.5]# cp sapi/fpm/www.conf /etc/php-fpm.d/

[root@opstrip.com php-7.1.5]# vi /usr/lib/systemd/system/php-fpm.service
# It's not recommended to modify this file in-place, because it
# will be overwritten during upgrades. If you want to customize,
# the best way is to use the "systemctl edit" command.
 
[Unit]
Description=The PHP FastCGI Process Manager
After=network.target
 
[Service]
Type=simple
PIDFile=/var/run/php-fpm.pid
ExecStart=/usr/local/php/sbin/php-fpm --nodaemonize --fpm-config /etc/php-fpm.conf
ExecReload=/bin/kill -USR2 $MAINPID
PrivateTmp=true
 
[Install]
WantedBy=multi-user.target

[root@opstrip.com php-7.1.5]# systemctl enable php-fpm.service
[root@opstrip.com php-7.1.5]# systemctl start php-fpm.service

[root@opstrip.com php-7.1.5]# ls ext
bcmath  dom     gd   json  oci8   pdo_firebird posix   skeleton sysvsem  xmlwriter
bz2   enchant    gettext  ldap  odbc   pdo_mysql  pspell  snmp  sysvshm  xsl
calendar  exif    gmp   libxml  opcache  pdo_oci   readline  soap  tidy   zip
com_dotnet ext_skel   hash   mbstring openssl  pdo_odbc  recode  sockets  tokenizer zlib
ctype   ext_skel_win32.php iconv  mcrypt  pcntl  pdo_pgsql  reflection spl   wddx
curl   fileinfo   imap   mysql  pcre   pdo_sqlite  session  sqlite3  xml
date   filter    interbase mysqli  pdo   pgsql   shmop   standard xmlreader
dba   ftp     intl   mysqlnd  pdo_dblib phar   simplexml  sysvmsg  xmlrpc

[root@opstrip.com ext]# git clone https://github.com/php/pecl-database-mysql mysql --recursive
Cloning into 'mysql'...
remote: Counting objects: 145, done.
remote: Total 145 (delta 0), reused 0 (delta 0), pack-reused 145
Receiving objects: 100% (145/145), 88.41 KiB | 0 bytes/s, done.
Resolving deltas: 100% (65/65), done.
Checking connectivity... done.

[root@opstrip.com ext]# cd mysql
[root@opstrip.com mysql]# ls
config.m4 config.w32 CREDITS LICENSE mysql.mak mysql_mysqlnd.h package.xml php_mysql.c php_mysql.h php_mysql_structs.h README.md tests
[root@opstrip.com mysql]# /usr/local/php/bin/phpize
Configuring for:
PHP Api Version:   20151012
Zend Module Api No:  20151012
Zend Extension Api No: 320151012
[root@opstrip.com mysql]# ./configure --with-php-config=/usr/local/php/bin/php-config

[root@opstrip.com mysql]# make && make install
[root@opstrip.com mysql]# ls /usr/local/php/lib/php/extensions/no-debug-non-zts-20160303/
mysql.so opcache.a opcache.so

extension = "mysql.so"