kubeadm入门

sparkle123

发布于 2021-02-05 14:33:46

6410

发布于 2021-02-05 14:33:46

文章被收录于专栏：大数据-Hadoop、Spark大数据-Hadoop、Spark

假定Kubeadm已经安装在节点上。

Step 1 - 初始化主节点

初始化集群的第一阶段是启动主节点。主服务器负责运行控制平面组件、etcd和API服务器。客户端将与API通信，以调度工作负载和管理集群的状态

kubeadm init --token=102952.1a7dd4cc8d1f4cc5 --kubernetes-versionsion -o short)

在生产环境中，建议排除明文令牌，kubeadm会生成一个令牌。

[init] Using Kubernetes version: v1.14.0
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [controlplane localhost] and IPs [172.17.0.44 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [controlplane localhost] and IPs [172.17.0.44 127.0.0.1 ::1]
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [controlplane kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.17.0.44]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 19.026618 seconds
[upload-config] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.14" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --experimental-upload-certs
[mark-control-plane] Marking the node controlplane as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node controlplane as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 102952.1a7dd4cc8d1f4cc5
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

要管理Kubernetes集群，需要客户端配置和证书。这个配置是在kubeadm初始化集群时创建的。该命令将配置复制到用户的主目录，并设置环境变量以供CLI使用

sudo cp /etc/kubernetes/admin.conf $HOME/

sudo chown $(id -u):$(id -g) $HOME/admin.conf

export KUBECONFIG=$HOME/admin.conf

部署 Container Networking Interface (CNI)

容器网络接口(CNI)定义了不同节点及其工作负载应该如何通信。有多个网络解决方案可用，如下：

https://kubernetes.io/docs/concepts/cluster-administration/addons/

在此我们使用WeaveWorks: cat /opt/weave-kube.yaml

apiVersion: v1
kind: List
items:
  - apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRole
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
    rules:
      - apiGroups:
          - ''
        resources:
          - pods
          - namespaces
          - nodes
        verbs:
          - get
          - list
          - watch
      - apiGroups:
          - networking.k8s.io
        resources:
          - networkpolicies
        verbs:
          - get
          - list
          - watch
      - apiGroups:
          - ''
        resources:
          - nodes/status
        verbs:
          - patch
          - update
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
    roleRef:
      kind: ClusterRole
      name: weave-net
      apiGroup: rbac.authorization.k8s.io
    subjects:
      - kind: ServiceAccount
        name: weave-net
        namespace: kube-system
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: Role
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    rules:
      - apiGroups:
          - ''
        resourceNames:
          - weave-net
        resources:
          - configmaps
        verbs:
          - get
          - update
      - apiGroups:
          - ''
        resources:
          - configmaps
        verbs:
          - create
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    roleRef:
      kind: Role
      name: weave-net
      apiGroup: rbac.authorization.k8s.io
    subjects:
      - kind: ServiceAccount
        name: weave-net
        namespace: kube-system
  - apiVersion: apps/v1
    kind: DaemonSet
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    spec:
      minReadySeconds: 5
      selector:
        matchLabels:
          name: weave-net
      template:
        metadata:
          labels:
            name: weave-net
        spec:
          containers:
            - name: weave
              command:
                - /home/weave/launch.sh
              env:
                - name: IPALLOC_RANGE
                  value: 10.32.0.0/24
                - name: HOSTNAME
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: spec.nodeName
              image: 'docker.io/weaveworks/weave-kube:2.6.0'
              readinessProbe:
                httpGet:
                  host: 127.0.0.1
                  path: /status
                  port: 6784
              resources:
                requests:
                  cpu: 10m
              securityContext:
                privileged: true
              volumeMounts:
                - name: weavedb
                  mountPath: /weavedb
                - name: cni-bin
                  mountPath: /host/opt
                - name: cni-bin2
                  mountPath: /host/home
                - name: cni-conf
                  mountPath: /host/etc
                - name: dbus
                  mountPath: /host/var/lib/dbus
                - name: lib-modules
                  mountPath: /lib/modules
                - name: xtables-lock
                  mountPath: /run/xtables.lock
            - name: weave-npc
              env:
                - name: HOSTNAME
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: spec.nodeName
              image: 'docker.io/weaveworks/weave-npc:2.6.0'
              resources:
                requests:
                  cpu: 10m
              securityContext:
                privileged: true
              volumeMounts:
                - name: xtables-lock
                  mountPath: /run/xtables.lock
          hostNetwork: true
          hostPID: true
          restartPolicy: Always
          securityContext:
            seLinuxOptions: {}
          serviceAccountName: weave-net
          tolerations:
            - effect: NoSchedule
              operator: Exists
          volumes:
            - name: weavedb
              hostPath:
                path: /var/lib/weave
            - name: cni-bin
              hostPath:
                path: /opt
            - name: cni-bin2
              hostPath:
                path: /home
            - name: cni-conf
              hostPath:
                path: /etc
            - name: dbus
              hostPath:
                path: /var/lib/dbus
            - name: lib-modules
              hostPath:
                path: /lib/modules
            - name: xtables-lock
              hostPath:
                path: /run/xtables.lock
                type: FileOrCreate
      updateStrategy:
        type: RollingUpdate

controlplane $ kubectl apply -f /opt/weave-kube.yaml 
serviceaccount/weave-net created
clusterrole.rbac.authorization.k8s.io/weave-net created
clusterrolebinding.rbac.authorization.k8s.io/weave-net created
role.rbac.authorization.k8s.io/weave-net created
rolebinding.rbac.authorization.k8s.io/weave-net created
daemonset.apps/weave-net created
controlplane $ cat /opt/weave-kube.yaml
apiVersion: v1
kind: List
items:
  - apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRole
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
    rules:
      - apiGroups:
          - ''
        resources:
          - pods
          - namespaces
          - nodes
        verbs:
          - get
          - list
          - watch
      - apiGroups:
          - networking.k8s.io
        resources:
          - networkpolicies
        verbs:
          - get
          - list
          - watch
      - apiGroups:
          - ''
        resources:
          - nodes/status
        verbs:
          - patch
          - update
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
    roleRef:
      kind: ClusterRole
      name: weave-net
      apiGroup: rbac.authorization.k8s.io
    subjects:
      - kind: ServiceAccount
        name: weave-net
        namespace: kube-system
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: Role
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    rules:
      - apiGroups:
          - ''
        resourceNames:
          - weave-net
        resources:
          - configmaps
        verbs:
          - get
          - update
      - apiGroups:
          - ''
        resources:
          - configmaps
        verbs:
          - create
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    roleRef:
      kind: Role
      name: weave-net
      apiGroup: rbac.authorization.k8s.io
    subjects:
      - kind: ServiceAccount
        name: weave-net
        namespace: kube-system
  - apiVersion: apps/v1
    kind: DaemonSet
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    spec:
      minReadySeconds: 5
      selector:
        matchLabels:
          name: weave-net
      template:
        metadata:
          labels:
            name: weave-net
        spec:
          containers:
            - name: weave
              command:
                - /home/weave/launch.sh
              env:
                - name: IPALLOC_RANGE
                  value: 10.32.0.0/24
                - name: HOSTNAME
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: spec.nodeName
              image: 'docker.io/weaveworks/weave-kube:2.6.0'
              readinessProbe:
                httpGet:
                  host: 127.0.0.1
                  path: /status
                  port: 6784
              resources:
                requests:
                  cpu: 10m
              securityContext:
                privileged: true
              volumeMounts:
                - name: weavedb
                  mountPath: /weavedb
                - name: cni-bin
                  mountPath: /host/opt
                - name: cni-bin2
                  mountPath: /host/home
                - name: cni-conf
                  mountPath: /host/etc
                - name: dbus
                  mountPath: /host/var/lib/dbus
                - name: lib-modules
                  mountPath: /lib/modules
                - name: xtables-lock
                  mountPath: /run/xtables.lock
            - name: weave-npc
              env:
                - name: HOSTNAME
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: spec.nodeName
              image: 'docker.io/weaveworks/weave-npc:2.6.0'
              resources:
                requests:
                  cpu: 10m
              securityContext:
                privileged: true
              volumeMounts:
                - name: xtables-lock
                  mountPath: /run/xtables.lock
          hostNetwork: true
          hostPID: true
          restartPolicy: Always
          securityContext:
            seLinuxOptions: {}
          serviceAccountName: weave-net
          tolerations:
            - effect: NoSchedule
              operator: Exists
          volumes:
            - name: weavedb
              hostPath:
                path: /var/lib/weave
            - name: cni-bin
              hostPath:
                path: /opt
            - name: cni-bin2
              hostPath:
                path: /home
            - name: cni-conf
              hostPath:
                path: /etc
            - name: dbus
              hostPath:
                path: /var/lib/dbus
            - name: lib-modules
              hostPath:
                path: /lib/modules
            - name: xtables-lock
              hostPath:
                path: /run/xtables.lock
                type: FileOrCreate
      updateStrategy:
        type: RollingUpdate

controlplane $ cat /opt/weave-kube.yaml 
apiVersion: v1
kind: List
items:
  - apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRole
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
    rules:
      - apiGroups:
          - ''
        resources:
          - pods
          - namespaces
          - nodes
        verbs:
          - get
          - list
          - watch
      - apiGroups:
          - networking.k8s.io
        resources:
          - networkpolicies
        verbs:
          - get
          - list
          - watch
      - apiGroups:
          - ''
        resources:
          - nodes/status
        verbs:
          - patch
          - update
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
    roleRef:
      kind: ClusterRole
      name: weave-net
      apiGroup: rbac.authorization.k8s.io
    subjects:
      - kind: ServiceAccount
        name: weave-net
        namespace: kube-system
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: Role
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    rules:
      - apiGroups:
          - ''
        resourceNames:
          - weave-net
        resources:
          - configmaps
        verbs:
          - get
          - update
      - apiGroups:
          - ''
        resources:
          - configmaps
        verbs:
          - create
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    roleRef:
      kind: Role
      name: weave-net
      apiGroup: rbac.authorization.k8s.io
    subjects:
      - kind: ServiceAccount
        name: weave-net
        namespace: kube-system
  - apiVersion: apps/v1
    kind: DaemonSet
    metadata:
      name: weave-net
      annotations:
        cloud.weave.works/launcher-info: |-
          {
            "original-request": {
              "url": "/k8s/v1.10/net.yaml?k8s-version=v1.16.0",
              "date": "Mon Oct 28 2019 18:38:09 GMT+0000 (UTC)"
            },
            "email-address": "support@weave.works"
          }
      labels:
        name: weave-net
      namespace: kube-system
    spec:
      minReadySeconds: 5
      selector:
        matchLabels:
          name: weave-net
      template:
        metadata:
          labels:
            name: weave-net
        spec:
          containers:
            - name: weave
              command:
                - /home/weave/launch.sh
              env:
                - name: IPALLOC_RANGE
                  value: 10.32.0.0/24
                - name: HOSTNAME
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: spec.nodeName
              image: 'docker.io/weaveworks/weave-kube:2.6.0'
              readinessProbe:
                httpGet:
                  host: 127.0.0.1
                  path: /status
                  port: 6784
              resources:
                requests:
                  cpu: 10m
              securityContext:
                privileged: true
              volumeMounts:
                - name: weavedb
                  mountPath: /weavedb
                - name: cni-bin
                  mountPath: /host/opt
                - name: cni-bin2
                  mountPath: /host/home
                - name: cni-conf
                  mountPath: /host/etc
                - name: dbus
                  mountPath: /host/var/lib/dbus
                - name: lib-modules
                  mountPath: /lib/modules
                - name: xtables-lock
                  mountPath: /run/xtables.lock
            - name: weave-npc
              env:
                - name: HOSTNAME
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: spec.nodeName
              image: 'docker.io/weaveworks/weave-npc:2.6.0'
              resources:
                requests:
                  cpu: 10m
              securityContext:
                privileged: true
              volumeMounts:
                - name: xtables-lock
                  mountPath: /run/xtables.lock
          hostNetwork: true
          hostPID: true
          restartPolicy: Always
          securityContext:
            seLinuxOptions: {}
          serviceAccountName: weave-net
          tolerations:
            - effect: NoSchedule
              operator: Exists
          volumes:
            - name: weavedb
              hostPath:
                path: /var/lib/weave
            - name: cni-bin
              hostPath:
                path: /opt
            - name: cni-bin2
              hostPath:
                path: /home
            - name: cni-conf
              hostPath:
                path: /etc
            - name: dbus
              hostPath:
                path: /var/lib/dbus
            - name: lib-modules
              hostPath:
                path: /lib/modules
            - name: xtables-lock
              hostPath:
                path: /run/xtables.lock
                type: FileOrCreate
      updateStrategy:
        type: RollingUpdate

这可以使用kubectl apply进行部署 kubectl apply -f /opt/weave-kube.yaml

Weave现在会在集群中以一系列pod的形式部署。它的状态可以通过命令kubectl get pod -n kube-system查看

controlplane $ kubectl get pod -n kube-system 
NAME                                   READY   STATUS    RESTARTS   AGE
coredns-fb8b8dccf-l9rx6                1/1     Running   0          11m
coredns-fb8b8dccf-xgt2z                1/1     Running   0          11m
etcd-controlplane                      1/1     Running   0          10m
kube-apiserver-controlplane            1/1     Running   0          10m
kube-controller-manager-controlplane   1/1     Running   0          10m
kube-proxy-p8864                       1/1     Running   0          11m
kube-scheduler-controlplane            1/1     Running   1          10m
weave-net-lvsh9                        2/2     Running   0          2m51s

Step 3 - 加入集群

目前Master和CNI初始化完成，其他节点就可以加入集群，只要它们拥有正确的令牌。令牌可以通过kubeadm token进行管理，如下：

 $ kubeadm token list
TOKEN                     TTL       EXPIRES                USAGES                   DESCRIPTION                                                EXTRA GROUPS
102952.1a7dd4cc8d1f4cc5   23h       2021-02-04T12:10:23Z   authentication,signing   The default bootstrap token generated by 'kubeadm init'.   system:bootstrappers:kubeadm:default-node-token

在第二个节点上，运行该命令加入集群，并提供主节点的IP地址

node01 $ kubeadm join --discovery-token-unsafe-skip-ca-verification --token=102952.1a7dd4cc8d1f4cc5 172.17.0.44:6443

其中

--discovery-token-unsafe-skip-ca-verification

标记用于绕过Discovery Token 验证。由于这个令牌是动态生成的，所以不能在步骤中包含它。在生产环境中，使用kubeadm init提供的令牌。

[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.14" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

Step 4 - 查看节点

集群现在已经初始化。主节点将管理集群，而我们的一个工作节点将运行容器工作负载

Kubernetes CLI(称为kubectl)现在可以使用配置访问集群。例如，命令kubectl get nodes将返回我们集群中的两个节点:

controlplane $ kubectl get nodes
NAME           STATUS   ROLES    AGE   VERSION
controlplane   Ready    master   31m   v1.14.0
node01         Ready    <none>   13m   v1.14.0

Step 5 - 部署 Pod

集群中的两个节点的状态现在应该是Ready。这意味着我们的部署可以被调度和启动。使用Kubectl可以部署pods。向主节点发出命令，每个节点只负责执行工作负载。下面的命令根据Docker镜像katacoda/ Docker -http-server创建一个Pod。

controlplane $ kubectl create deployment http --image=katacoda/docker-http-server:latest
deployment.apps/http created

可以通过以下方式查看Pod创建的状态

controlplane $ kubectl get pods
NAME                    READY   STATUS    RESTARTS   AGE
http-7f8cbdf584-4x6z2   1/1     Running   0          35s

运行后，可以看到Docker容器运行在节点上。

node01 $ docker ps | grep docker-http-server
0083eec91ba0        katacoda/docker-http-server   "/app"                   About a minute ago   Up About a minute                       k8s_docker-http-server_http-7f8cbdf584-4x6z2_default_66c9a2ba-661d-11eb-9c73-0242ac11002c_0

Step 6 - 部署 Dashboard

Kubernetes有一个基于web的Dashboard UI，借助它可以可视化Kubernetes集群

使用命令kubectl apply -f dashboard.yaml部署仪表板yaml

controlplane $ kubectl apply -f dashboard.yaml 
secret/kubernetes-dashboard-certs created
serviceaccount/kubernetes-dashboard created
role.rbac.authorization.k8s.io/kubernetes-dashboard-minimal created
rolebinding.rbac.authorization.k8s.io/kubernetes-dashboard-minimal created
deployment.apps/kubernetes-dashboard created
service/kubernetes-dashboard created

指示板被部署到kube-system名称空间中。命令kubectl get pods -n kube-system查看部署的状态

controlplane $ kubectl get pods -n kube-system
NAME                                    READY   STATUS    RESTARTS   AGE
coredns-fb8b8dccf-l9rx6                 1/1     Running   0          45m
coredns-fb8b8dccf-xgt2z                 1/1     Running   0          45m
etcd-controlplane                       1/1     Running   0          44m
kube-apiserver-controlplane             1/1     Running   0          44m
kube-controller-manager-controlplane    1/1     Running   0          44m
kube-proxy-ld6d4                        1/1     Running   0          27m
kube-proxy-p8864                        1/1     Running   0          45m
kube-scheduler-controlplane             1/1     Running   1          43m
kubernetes-dashboard-5f57845f9d-9fttf   1/1     Running   0          73s
weave-net-7c5dh                         2/2     Running   1          27m
weave-net-lvsh9                         2/2     Running   0          36m

登录时需要使用ServiceAccount。ClusterRoleBinding用于为新的ServiceAccount (admin-user)分配集群中的cluster-admin角色

controlplane $ cat <<EOF | kubectl create -f - 
> apiVersion: v1
> kind: ServiceAccount
> metadata:
>   name: admin-user
>   namespace: kube-system
> ---
> apiVersion: rbac.authorization.k8s.io/v1beta1
> kind: ClusterRoleBinding
> metadata:
>   name: admin-user
> roleRef:
>   apiGroup: rbac.authorization.k8s.io
>   kind: ClusterRole
>   name: cluster-admin
> subjects:
> - kind: ServiceAccount
>   name: admin-user
>   namespace: kube-system
> EOF
serviceaccount/admin-user created
clusterrolebinding.rbac.authorization.k8s.io/admin-user created

这意味着他们可以控制Kubernetes的所有方面。使用ClusterRoleBinding和RBAC，可以根据安全需求定义不同级别的权限。

创建ServiceAccount后，要找到要登录的令牌： kubectl -n kube-system describe secret (kubectl -n kube-system grep admin-user | awk '{print 1}')

controlplane $ kubectl -n kube-system describe secret $(kubectl -n kube-system grep admin-user | awk '{print $1}')
Name:         admin-user-token-59z49
Namespace:    kube-system
Labels:       <none>
Annotations:  kubernetes.io/service-account.name: admin-user
              kubernetes.io/service-account.uid: 4241eb05-661f-11eb-9c73-0242ac11002c

Type:  kubernetes.io/service-account-token

Data
====
ca.crt:     1025 bytes
namespace:  11 bytes
token:      eyJhbGciOiJSUzI1NiIsImtpZCI6IiJ9.eyJpc3MiOiJrdWJlcm5ldGVzL3NlcnZpY2VhY2NvdW50Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9uYW1lc3BhY2UiOiJrdWJlLXN5c3RlbSIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VjcmV0Lm5hbWUiOiJhZG1pbi11c2VyLXRva2VuLTU5ejQ5Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9zZXJ2aWNlLWFjY291bnQubmFtZSI6ImFkbWluLXVzZXIiLCJrdWJlcm5ldGVzLmlvL3NlcnZpY2VhY2NvdW50L3NlcnZpY2UtYWNjb3VudC51aWQiOiI0MjQxZWIwNS02NjFmLTExZWItOWM3My0wMjQyYWMxMTAwMmMiLCJzdWIiOiJzeXN0ZW06c2VydmljZWFjY291bnQ6a3ViZS1zeXN0ZW06YWRtaW4tdXNlciJ9.ZZepDRh26A2f-xyJwBJCWsi-O7SBalfKN-NqT3Kbnu2SHHjDKl9vvdWvIZC5dR2hTqq2WpJgDSjPiXrUp5zguAFqicJW9dI_pjyXUC_e0QG8P1q0DwYzcDcUw0qKpe7KArflBK7fVFw2fLgVDvr-ElrhXRPBRwGWKO6MzzK2GfmoZTMdbIXaAZpQLK1mmR8FDXC3WfgSPIz4OHWwDfJhasub9QDwtHYG1llA73D5NNsqZSStTPu_wP5_ZA1us1DGZ_TcNjTLUVrMWA0spHxN-IQdEVBk0JRUAKbHt9Ed5T9ElQwJCyZmcILkACgrm6baxzBxOY1jDkFIVJBoIAbwvw

部署完成仪表板，它使用externalIPs将服务绑定到端口8443。这使得仪表板对集群外部可用。可以在https://2886795312-8443-xdp.com/上查看。

使用admin-user令牌访问指示板。对于生产环境，建议使用kubectl代理来访问仪表板，而不是使用externalIPs。

使用admin-user令牌访问指示板。对于生产环境，建议使用kubectl proxy来访问仪表板，而不是使用externalIPs。

详情请访问: