前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
圈层
工具
发布
首页
学习
活动
专区
圈层
工具
MCP广场
社区首页 >专栏 >高通平台dtb文件的加载过程「建议收藏」

高通平台dtb文件的加载过程「建议收藏」

作者头像
全栈程序员站长
发布2022-11-17 16:27:18
发布2022-11-17 16:27:18
3.1K00
代码可运行
举报
运行总次数:0
代码可运行

高通平台dtb文件的加载过程

高通平台对dts的两种打包方式

zImage-dtb

直接和kernel编译在一起,生成zImage-dtb,dtb的位置在kernel起始地址偏移0x2C的位置,然后和kernel一起打包到bootimage里。

dt.img

独立编译出dt.img, 然后打包到bootimage里。

zImage-dtb方式

zImage-dtb的编译

dtb怎么编译进bootimage的? makefile文件分析

.config 文件里生成的内容如下

代码语言:javascript
代码运行次数:0
运行
复制
CONFIG_ARCH_MSM8916=y

CONFIG_ARCH_MSM8937=y

CONFIG_ARCH_MSM8917=y

CONFIG_ARCH_MSM8920=y

CONFIG_ARCH_MSM8940=y

CONFIG_ARCH_MSM8953=y

Jetbrains全家桶1年46,售后保障稳定

kernel/msm-3.18/arch/arm/boot/dts/qcom/Makefile

(只要这些arch定义了 这些dtb文件都会被包含进去)

代码语言:javascript
代码运行次数:0
运行
复制
dtb-$(CONFIG_ARCH_MDMCALIFORNIUM) += mdmcalifornium-sim.dtb \

mdmcalifornium-rumi.dtb \

代码语言:javascript
代码运行次数:0
运行
复制
mdmcalifornium-v1.1-nand-mtp.dtb \

mdmcalifornium-v1.1-nand-dualwifi-mtp.dtb



dtb-$(CONFIG_ARCH_MSM8937) += msm8937-rumi.dtb \

msm8937-pmi8950-cdp.dtb \

.......

apq8037-pmi8950-mtp.dtb \

apq8037-pmi8937-mtp.dtb



dtb-$(CONFIG_ARCH_MSM8917) += msm8917-rumi.dtb \

apq8017-pmi8937-cdp.dtb \

代码语言:javascript
代码运行次数:0
运行
复制
msm8917-qgp-tmo.dtb \

msm8917-pmi8937-qrd-sku5.dtb

.config 文件里生成的内容如下

代码语言:javascript
代码运行次数:0
运行
复制
CONFIG_USE_OF=y

CONFIG_ATAGS=y

# CONFIG_DEPRECATED_PARAM_STRUCT is not set

CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE=y

CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES=

kernel/msm-3.18/arch/arm/boot/Makefile

代码语言:javascript
代码运行次数:0
运行
复制
DTB_NAMES := $(subst $\",,$(CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES))

ifneq ($(DTB_NAMES),)

DTB_LIST := $(addsuffix .dtb,$(DTB_NAMES))

else

DTB_LIST := $(dtb-y)

endif

DTB_OBJS := $(addprefix $(obj)/dts/qcom/,$(DTB_LIST))

因为CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES 这个为空,

所以

代码语言:javascript
代码运行次数:0
运行
复制
DTB_LIST := $(dtb-y)

DTB_OBJS := $(obj)/dts/qcom/$(dtb-y)

需要编译zImage-dtb

代码语言:javascript
代码运行次数:0
运行
复制
# Default target when executing plain make

ifeq ($(CONFIG_XIP_KERNEL),y)
KBUILD_IMAGE := xipImage

else ifeq ($(CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE),y)

KBUILD_IMAGE := zImage-dtb

else

KBUILD_IMAGE := zImage

endif



$(obj)/Image: vmlinux FORCE

$(call if_changed,objcopy)

@$(kecho) ' Kernel: $@ is ready'



$(obj)/compressed/vmlinux: $(obj)/Image FORCE

$(Q)$(MAKE) $(build)=$(obj)/compressed $@



$(obj)/zImage: $(obj)/compressed/vmlinux FORCE

$(call if_changed,objcopy)

@$(kecho) ' Kernel: $@ is ready'



$(obj)/zImage-dtb: $(obj)/zImage $(DTB_OBJS) FORCE

$(call if_changed,cat)

@echo ' Kernel: $@ is ready'

可以看出zImage-dtb 依赖于 (obj)/zImage (DTB_OBJS)

代码语言:javascript
代码运行次数:0
运行
复制
%.dtb: | scripts

$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@



dtbs: scripts

$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs

$(foreach DIR, $(DTSSUBDIR), $(Q)$(MAKE) $(build)=$(boot)/dts/$(DIR) MACHINE=$(MACHINE) dtbs)



zImage-dtb: vmlinux scripts dtbs

$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) DTSSUBDIR=$(DTSSUBDIR) $(boot)/$@

二进制文件查看

查看kernel的二进制文件,查看0x2C位置的值,此处存放的值是第一个dtb文件的偏移地址

从图中可以看出dtb所在的地址为0x008e7db0 + 0x800 = 0x008e85b0

0x008e85b0地址可以看到magic 0xd00dfeed(大端)

0x008e85b0 + 0x0002bef5 = 0x009144A5为下一个dtb的起始地址

0x009144A5地址可以看到新的dtb开始,看到magic 0xd00dfeed(大端)

lk的加载过程代码分析

app\aboot\aboot.c

boot_linux_from_mmc dt_size = hdr->dt_size; if(dt_size) { … }else{ dtb = dev_tree_appended() }

代码语言:javascript
代码运行次数:0
运行
复制
void *dev_tree_appended(void *kernel, uint32_t kernel_size, uint32_t dtb_offset, void *tags)
{ 

if (dtb_offset)
app_dtb_offset = dtb_offset;
else
memcpy((void*) &app_dtb_offset, (void*) (kernel + DTB_OFFSET), sizeof(uint32_t));	
....
while (((uintptr_t)dtb + sizeof(struct fdt_header)) < (uintptr_t)kernel_end) { 

struct fdt_header dtb_hdr;
uint32_t dtb_size;
/* the DTB could be unaligned, so extract the header, * and operate on it separately */
memcpy(&dtb_hdr, dtb, sizeof(struct fdt_header));
if (fdt_check_header((const void *)&dtb_hdr) != 0 ||
fdt_check_header_ext((const void *)&dtb_hdr) != 0 ||
((uintptr_t)dtb + (uintptr_t)fdt_totalsize((const void *)&dtb_hdr) < (uintptr_t)dtb) ||
((uintptr_t)dtb + (uintptr_t)fdt_totalsize((const void *)&dtb_hdr) > (uintptr_t)kernel_end))
break;
dtb_size = fdt_totalsize(&dtb_hdr);
dev_tree_compatible(dtb, dtb_size, dt_entry_queue);
/* goto the next device tree if any */
dtb += dtb_size;
}
best_match_dt_entry = platform_dt_match_best(dt_entry_queue);
if (best_match_dt_entry){ 

bestmatch_tag = (void *)best_match_dt_entry->offset;
bestmatch_tag_size = best_match_dt_entry->size;
dprintf(INFO, "Best match DTB tags %u/%08x/0x%08x/%x/%x/%x/%x/%x/%x/%x\n",
best_match_dt_entry->platform_id, best_match_dt_entry->variant_id,
best_match_dt_entry->board_hw_subtype, best_match_dt_entry->soc_rev,
best_match_dt_entry->pmic_rev[0], best_match_dt_entry->pmic_rev[1],
best_match_dt_entry->pmic_rev[2], best_match_dt_entry->pmic_rev[3],
best_match_dt_entry->offset, best_match_dt_entry->size);
dprintf(INFO, "Using pmic info 0x%0x/0x%x/0x%x/0x%0x for device 0x%0x/0x%x/0x%x/0x%0x\n",
best_match_dt_entry->pmic_rev[0], best_match_dt_entry->pmic_rev[1],
best_match_dt_entry->pmic_rev[2], best_match_dt_entry->pmic_rev[3],
board_pmic_target(0), board_pmic_target(1),
board_pmic_target(2), board_pmic_target(3));
}
.......................
return NULL;
}

其中DTB_OFFSET的定义为0x2C,与上一节的图相对应。 根据偏移值找到dtb的位置,然后对每个dtb进行解析,找到最匹配的那个dtb,这个是有dev_tree_compatible(dtb, dtb_size, dt_entry_queue);函数来实现的。

dev_tree_compatible(void *dtb, uint32_t dtb_size, struct dt_entry_node *dtb_list) platform_dt_absolute_match(cur_dt_entry, dtb_list)

dev_tree_compatible会调用platform_dt_absolute_match来判断

代码语言:javascript
代码运行次数:0
运行
复制
static int platform_dt_absolute_match(struct dt_entry *cur_dt_entry, struct dt_entry_node *dt_list)
{ 

uint32_t cur_dt_hlos_ddr;
uint32_t cur_dt_hw_platform;
uint32_t cur_dt_hw_subtype;
uint32_t cur_dt_msm_id;
dt_node *dt_node_tmp = NULL;
/* Platform-id * bit no |31 24|23 16|15 0| * |reserved|foundry-id|msm-id| */
cur_dt_msm_id = (cur_dt_entry->platform_id & 0x0000ffff);
cur_dt_hw_platform = (cur_dt_entry->variant_id & 0x000000ff);
cur_dt_hw_subtype = (cur_dt_entry->board_hw_subtype & 0xff);
/* Determine the bits 10:8 to check the DT with the DDR Size */
cur_dt_hlos_ddr = (cur_dt_entry->board_hw_subtype & 0x700);
/* 1. must match the msm_id, platform_hw_id, platform_subtype and DDR size * soc, board major/minor, pmic major/minor must less than board info * 2. find the matched DTB then return 1 * 3. otherwise return 0 */
if((cur_dt_msm_id == (board_platform_id() & 0x0000ffff)) &&
(cur_dt_hw_platform == board_hardware_id()) &&
(cur_dt_hw_subtype == board_hardware_subtype()) &&
(cur_dt_hlos_ddr == (target_get_hlos_subtype() & 0x700)) &&
(cur_dt_entry->soc_rev <= board_soc_version()) &&
((cur_dt_entry->variant_id & 0x00ffff00) <= (board_target_id() & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[0] & 0x00ffff00) <= (board_pmic_target(0) & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[1] & 0x00ffff00) <= (board_pmic_target(1) & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[2] & 0x00ffff00) <= (board_pmic_target(2) & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[3] & 0x00ffff00) <= (board_pmic_target(3) & 0x00ffff00))) { 

dt_node_tmp = dt_entry_list_init();
memcpy((char*)dt_node_tmp->dt_entry_m,(char*)cur_dt_entry, sizeof(struct dt_entry));
dprintf(SPEW, "Add DTB entry %u/%08x/0x%08x/%x/%x/%x/%x/%x/%x/%x\n",
dt_node_tmp->dt_entry_m->platform_id, dt_node_tmp->dt_entry_m->variant_id,
dt_node_tmp->dt_entry_m->board_hw_subtype, dt_node_tmp->dt_entry_m->soc_rev,
dt_node_tmp->dt_entry_m->pmic_rev[0], dt_node_tmp->dt_entry_m->pmic_rev[1],
dt_node_tmp->dt_entry_m->pmic_rev[2], dt_node_tmp->dt_entry_m->pmic_rev[3],
dt_node_tmp->dt_entry_m->offset, dt_node_tmp->dt_entry_m->size);
insert_dt_entry_in_queue(dt_list, dt_node_tmp);
return 1;
}
return 0;
}

board_platform_id() board_hardware_id() board_hardware_subtype() target_get_hlos_subtype() board_soc_version()board_target_id() 几乎都来自board结构体

代码语言:javascript
代码运行次数:0
运行
复制
struct board_data {
uint32_t platform;  //board_platform_id
uint32_t foundry_id;
uint32_t chip_serial;
uint32_t platform_version;//board_soc_version
uint32_t platform_hw;//board_hardware_id()
uint32_t platform_subtype;//board_hardware_subtype
uint32_t target;//board_target_id()
uint32_t baseband;
struct board_pmic_data pmic_info[MAX_PMIC_DEVICES];
uint32_t platform_hlos_subtype;//target_get_hlos_subtype即board_hlos_subtype
uint32_t num_pmics;
uint32_t pmic_array_offset;
struct board_pmic_data *pmic_info_array;
};

board在platform\msm_shared\board.c 文件里赋值 board_init() platform_detect()

代码语言:javascript
代码运行次数:0
运行
复制
			board.platform = board_info_v11.board_info_v3.msm_id;
board.platform_version = board_info_v11.board_info_v3.msm_version;
board.platform_hw = board_info_v11.board_info_v3.hw_platform;
board.platform_subtype = board_info_v11.platform_subtype;
/* * fill in board.target with variant_id information * bit no |31 24 |23 16|15 8|7 0| * board.target = |subtype|plat_hw_ver major|plat_hw_ver minor|hw_platform| * */
board.target = (((board_info_v11.platform_subtype & 0xff) << 24) |
(((board_info_v11.platform_version >> 16) & 0xff) << 16) |
((board_info_v11.platform_version & 0xff) << 8) |
(board_info_v11.board_info_v3.hw_platform & 0xff));
board.foundry_id = board_info_v11.foundry_id;
board.chip_serial = board_info_v11.chip_serial;
board.num_pmics = board_info_v11.num_pmics;
board.pmic_array_offset = board_info_v11.pmic_array_offset;
}
/* HLOS subtype * bit no |31 20 | 19 16|15 13 |12 11 | 10 8 | 7 0| * board.platform_hlos_subtype = |reserved | Boot device |Reserved | Panel | DDR detection | subtype| * | bits | | bits | Detection | */
board.platform_hlos_subtype = (board_get_ddr_subtype() << 8) | (platform_get_boot_dev() << 16) | (platform_detect_panel() << 11);

根据代码里给的注释,从smem里获得

platform_dt_absolute_match过程

代码语言:javascript
代码运行次数:0
运行
复制
static int platform_dt_absolute_match(struct dt_entry *cur_dt_entry, struct dt_entry_node *dt_list)
{ 

/* Platform-id * bit no |31 24|23 16|15 0| * |reserved|foundry-id|msm-id| */
cur_dt_msm_id = (cur_dt_entry->platform_id & 0x0000ffff);
cur_dt_hw_platform = (cur_dt_entry->variant_id & 0x000000ff);
cur_dt_hw_subtype = (cur_dt_entry->board_hw_subtype & 0xff);
/* Determine the bits 10:8 to check the DT with the DDR Size */
cur_dt_hlos_ddr = (cur_dt_entry->board_hw_subtype & 0x700);
/* 1. must match the msm_id, platform_hw_id, platform_subtype and DDR size * soc, board major/minor, pmic major/minor must less than board info * 2. find the matched DTB then return 1 * 3. otherwise return 0 */
if((cur_dt_msm_id == (board_platform_id() & 0x0000ffff)) &&
(cur_dt_hw_platform == board_hardware_id()) &&
(cur_dt_hw_subtype == board_hardware_subtype()) &&
(cur_dt_hlos_ddr == (target_get_hlos_subtype() & 0x700)) &&
(cur_dt_entry->soc_rev <= board_soc_version()) &&
((cur_dt_entry->variant_id & 0x00ffff00) <= (board_target_id() & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[0] & 0x00ffff00) <= (board_pmic_target(0) & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[1] & 0x00ffff00) <= (board_pmic_target(1) & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[2] & 0x00ffff00) <= (board_pmic_target(2) & 0x00ffff00)) &&
((cur_dt_entry->pmic_rev[3] & 0x00ffff00) <= (board_pmic_target(3) & 0x00ffff00))) { 

dt_node_tmp = dt_entry_list_init();
memcpy((char*)dt_node_tmp->dt_entry_m,(char*)cur_dt_entry, sizeof(struct dt_entry));
... ...
}

对比之前需要从dts里将信息提取出来,主要是通过读取三个属性值然后提取

代码语言:javascript
代码运行次数:0
运行
复制
pmic_prop = (const char *)fdt_getprop(dtb, root_offset, "qcom,pmic-id", &len_pmic_id);
board_prop = (const char *)fdt_getprop(dtb, root_offset, "qcom,board-id", &len_board_id);

plat_prop = (const char *)fdt_getprop(dtb, root_offset, “qcom,msm-id”, &len_plat_id);

代码语言:javascript
代码运行次数:0
运行
复制
		board_data[i].variant_id = fdt32_to_cpu(((struct board_id *)board_prop)->variant_id);
board_data[i].platform_subtype = fdt32_to_cpu(((struct board_id *)board_prop)->platform_subtype);
dt_entry_array[k].board_hw_subtype = board_data[j].platform_subtype;
platform_data[i].platform_id = fdt32_to_cpu(((struct plat_id *)plat_prop)->platform_id);
platform_data[i].soc_rev = fdt32_to_cpu(((struct plat_id *)plat_prop)->soc_rev);
pmic_data[i].pmic_version[0]= fdt32_to_cpu(((struct pmic_id *)pmic_prop)->pmic_version[0]);
pmic_data[i].pmic_version[1]= fdt32_to_cpu(((struct pmic_id *)pmic_prop)->pmic_version[1]);
pmic_data[i].pmic_version[2]= fdt32_to_cpu(((struct pmic_id *)pmic_prop)->pmic_version[2]);
pmic_data[i].pmic_version[3]= fdt32_to_cpu(((struct pmic_id *)pmic_prop)->pmic_version[3]);

must match the msm_id, platform_hw_id, platform_subtype and DDR size 可见 msm_id, platform_hw_platform, platform_subtype and DDR size 这几个需要完全匹配才可以 cur_dt_msm_id = (cur_dt_entry->platform_id & 0x0000ffff); 来自”qcom,msm-id”

platform_hw_platform = (cur_dt_entry->variant_id & 0x000000ff); 来自 “qcom,board-id”

cur_dt_hw_subtype = (cur_dt_entry->board_hw_subtype & 0xff); 同样来自 “qcom,board-id”

总之,最终会找到一个最合适的dtb,也有可能因为配置不对找不到匹配的dtb文件。

由此可见,在dtb未匹配时,需要修改sbl里的id,或者同步修改dts里的board id,让两者匹配才可以。

dt.img方式

dt.img的编译

device\qcom\common\generate_extra_images.mk

代码语言:javascript
代码运行次数:0
运行
复制
#----------------------------------------------------------------------
# Generate device tree image (dt.img)
#----------------------------------------------------------------------
ifneq ($(strip $(TARGET_NO_KERNEL)),true)
ifeq ($(strip $(BOARD_KERNEL_SEPARATED_DT)),true)
ifeq ($(strip $(BUILD_TINY_ANDROID)),true)
include device/qcom/common/dtbtool/Android.mk
endif
DTBTOOL := $(HOST_OUT_EXECUTABLES)/dtbTool$(HOST_EXECUTABLE_SUFFIX)
INSTALLED_DTIMAGE_TARGET := $(PRODUCT_OUT)/dt.img
possible_dtb_dirs = $(KERNEL_OUT)/arch/$(TARGET_KERNEL_ARCH)/boot/dts/ $(KERNEL_OUT)/arch/arm/boot/dts/ $(KERNEL_OUT)/arch/arm/boot/
dtb_dir = $(firstword $(wildcard $(possible_dtb_dirs)))
define build-dtimage-target
$(call pretty,"Target dt image: $(INSTALLED_DTIMAGE_TARGET)")
$(hide) $(DTBTOOL) -o $@ -s $(BOARD_KERNEL_PAGESIZE) -p $(KERNEL_OUT)/scripts/dtc/ $(dtb_dir)
$(hide) chmod a+r $@
endef
$(INSTALLED_DTIMAGE_TARGET): $(DTBTOOL) $(INSTALLED_KERNEL_TARGET)
$(build-dtimage-target)
ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DTIMAGE_TARGET)
ALL_MODULES.$(LOCAL_MODULE).INSTALLED += $(INSTALLED_DTIMAGE_TARGET)
endif
endif

可见是使用dtbtool dtbtool代码定义在device\qcom\common\dtbtool\dtbtool.c, 与这个文件同一目录下的dtbtool.txt是对dtbtool的使用说明。

1.1) Android boot image Header:

  1. Magic (8B)
  2. kernel size (4B)
  3. kernel addr (4B)
  4. ramdisk size (4B)
  5. ramdisk addr (4B)
  6. 2ndary size (4B)
  7. 2ndary addr (4B)
  8. tags addr (4B)
  9. page size (4B)
  10. unused #1 (4B) (zero in standard Android)
  11. unused #2 (4B) (zero in standard Android)
  12. product name (16B)
  13. kernel cmdline (512B)
  14. id (8B)

1.2) Layout: A) header (as above – 1 page) B) kernel (n pages) C) ramdisk (m pages) D) second stage (o pages) 2) QC table of device tree

dt.img的构造

可以看出magic是QCDT,version是3,num_entries是0x89

可以看出offset是0x1800, size是0x26800 (0x1800+0x26800=0x28000)

0x28000是另一个dtb的开始

lk的加载过程代码分析

代码语言:javascript
代码运行次数:0
运行
复制
int boot_linux_from_mmc(void)
{ 

...............
if(dt_size) { 

dt_table_offset = ((uint32_t)image_addr + page_size + kernel_actual + ramdisk_actual + second_actual);
table = (struct dt_table*) dt_table_offset;
if (dev_tree_validate(table, hdr->page_size, &dt_hdr_size) != 0) { 

dprintf(CRITICAL, "ERROR: Cannot validate Device Tree Table \n");
return -1;
}
/* Its Error if, dt_hdr_size (table->num_entries * dt_entry size + Dev_Tree Header) goes beyound hdr->dt_size*/
if (dt_hdr_size > ROUND_TO_PAGE(dt_size,hdr->page_size)) { 

dprintf(CRITICAL, "ERROR: Invalid Device Tree size \n");
return -1;
}
/* Find index of device tree within device tree table */
if(dev_tree_get_entry_info(table, &dt_entry) != 0){ 

dprintf(CRITICAL, "ERROR: Getting device tree address failed\n");
return -1;
}
if(dt_entry.offset > (UINT_MAX - dt_entry.size)) { 

dprintf(CRITICAL, "ERROR: Device tree contents are Invalid\n");
return -1;
}
/* Ensure we are not overshooting dt_size with the dt_entry selected */
if ((dt_entry.offset + dt_entry.size) > dt_size) { 

dprintf(CRITICAL, "ERROR: Device tree contents are Invalid\n");
return -1;
}
if (is_gzip_package((unsigned char *)dt_table_offset + dt_entry.offset, dt_entry.size))
{ 

unsigned int compressed_size = 0;
out_addr += out_len;
out_avai_len -= out_len;
dprintf(INFO, "decompressing dtb: start\n");
rc = decompress((unsigned char *)dt_table_offset + dt_entry.offset,
dt_entry.size, out_addr, out_avai_len,
&compressed_size, &dtb_size);
if (rc)
{ 

dprintf(CRITICAL, "decompressing dtb failed!!!\n");
ASSERT(0);
}
dprintf(INFO, "decompressing dtb: done\n");
best_match_dt_addr = out_addr;
} else { 

best_match_dt_addr = (unsigned char *)dt_table_offset + dt_entry.offset;
dtb_size = dt_entry.size;
}
/* Validate and Read device device tree in the tags_addr */
if (check_aboot_addr_range_overlap(hdr->tags_addr, dtb_size) ||
check_ddr_addr_range_bound(hdr->tags_addr, dtb_size))
{ 

dprintf(CRITICAL, "Device tree addresses are not valid\n");
return -1;
}
memmove((void *)hdr->tags_addr, (char *)best_match_dt_addr, dtb_size);
} else { 

/* Validate the tags_addr */
if (check_aboot_addr_range_overlap(hdr->tags_addr, kernel_actual) ||
check_ddr_addr_range_bound(hdr->tags_addr, kernel_actual))
{ 

dprintf(CRITICAL, "Device tree addresses are not valid.\n");
return -1;
}
/* * If appended dev tree is found, update the atags with * memory address to the DTB appended location on RAM. * Else update with the atags address in the kernel header */
void *dtb;
dtb = dev_tree_appended(
(void*)(image_addr + page_size +
patched_kernel_hdr_size),
hdr->kernel_size, dtb_offset,
(void *)hdr->tags_addr);
if (!dtb) { 

dprintf(CRITICAL, "ERROR: Appended Device Tree Blob not found\n");
return -1;
}
} 
....................
}

在这种情况下dt_size是非0的,走第一个分支,第二个分支是zImage-dtb那种方式使用的

代码语言:javascript
代码运行次数:0
运行
复制
int dev_tree_get_entry_info(struct dt_table *table, struct dt_entry *dt_entry_info)
for(i = 0; found == 0 && i < table->num_entries; i++)
platform_dt_absolute_match(cur_dt_entry, dt_entry_queue);
best_match_dt_entry = platform_dt_match_best(dt_entry_queue);

调用关系如上,对每一个dt_entry调用platform_dt_absolute_match,找到最匹配的,匹配方法与zImage-dtb方式类似,不再赘述。

小结

device tree最终编译成dtb文件,而高通平台为了让一个bootimage支持多种不同的配置(甚至是不同的board,不同的平台),将众多的dtb文件一起同时编译和打包。为了区分匹配不同的平台,高通平台需要再sbl里配置id,与device tree里的qcom,pmic-id和qcom,board-id相呼应,这两者需要匹配,才能实现dtb文件的正确加载,然后由lk传递给kernel。而dtb的识别是在lk里实现的,lk代码里对dt.img方式和zImage-dtb方式做了兼容,可以同时识别这两种方式。

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 举报,一经查实,本站将立刻删除。

发布者:全栈程序员-用户IM,转载请注明出处:https://javaforall.cn/219594.html原文链接:https://javaforall.cn

本文参与 腾讯云自媒体同步曝光计划,分享自作者个人站点/博客。
原始发表:2022年10月28日,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体同步曝光计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • 高通平台dtb文件的加载过程
  • 高通平台对dts的两种打包方式
    • zImage-dtb
    • dt.img
  • zImage-dtb方式
    • zImage-dtb的编译
    • 二进制文件查看
    • lk的加载过程代码分析
  • dt.img方式
    • dt.img的编译
    • dt.img的构造
    • lk的加载过程代码分析
  • 小结
领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档