前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >问题解决:TNS-12543: TNS:destination host unreachable

问题解决:TNS-12543: TNS:destination host unreachable

作者头像
Alfred Zhao
发布2023-05-23 16:58:48
3630
发布2023-05-23 16:58:48
举报

环境: 11.2.0.3 ADG (db11g\db11gadg\db11gcas)

在自己先前克隆后的环境互相tnsping报错。

tnsping 本机ok,tnsping其他机器均报错:

[oracle@db11g ~]$ tnsping jingyu

TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 13-MAY-2023 08:09:11

Copyright (c) 1997, 2011, Oracle.  All rights reserved.

Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.18)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = jingyu)))
OK (0 msec)
[oracle@db11g ~]$ tnsping jyadg

TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 13-MAY-2023 08:09:14

Copyright (c) 1997, 2011, Oracle.  All rights reserved.

Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.19)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = jyadg)))
TNS-12543: TNS:destination host unreachable
[oracle@db11g ~]$ tnsping jycas

TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 13-MAY-2023 08:09:17

Copyright (c) 1997, 2011, Oracle.  All rights reserved.

Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.20)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = jycas)))
TNS-12543: TNS:destination host unreachable

1.检查防火墙和SElinux状态

第一反应就是防火墙或SELinux导致,初步检查发现:防火墙未运行,SELinux也禁用掉。

[root@db11g ~]# service iptables status
Redirecting to /bin/systemctl status iptables.service
Unit iptables.service could not be found.

[root@db11g ~]# getenforce
Permissive
[root@db11g ~]# cat /etc/sysconfig/selinux 

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted 

配置文件tnsnames.ora同步到3个环境,保持一致:

# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.

JINGYU =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.18)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = jingyu)
    )
  )

JYADG =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.19)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = jyadg)
    )
  )

JYCAS =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.20)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = jycas)
    )
  )

2.确认克隆的网卡是否正常

主要怀疑克隆是否MAC地址之类做了变化,期望是不一样的MAC,实际也是,在宿主机看arp记录的和目前的都匹配:

[oracle@bogon ~]$ arp -a|grep 1.18
bogon (192.168.1.18) at 52:54:00:6f:92:54 [ether] on br0
[oracle@bogon ~]$ arp -a|grep 1.19
localhost (192.168.1.19) at 52:54:00:d0:49:1b [ether] on br0
[oracle@bogon ~]$ arp -a|grep 1.20
localhost (192.168.1.20) at 52:54:00:71:f1:9a [ether] on br0

可现在就是网络IP可以ping通,但是tnsping说啥不通:

[oracle@bogon ~]$ ping 192.168.1.18
PING 192.168.1.18 (192.168.1.18) 56(84) bytes of data.
64 bytes from 192.168.1.18: icmp_seq=1 ttl=64 time=0.525 ms
64 bytes from 192.168.1.18: icmp_seq=2 ttl=64 time=0.312 ms
^C
--- 192.168.1.18 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1024ms
rtt min/avg/max/mdev = 0.312/0.418/0.525/0.108 ms
[oracle@bogon ~]$ tnsping 192.168.1.18

TNS Ping Utility for Linux: Version 19.0.0.0.0 - Production on 13-MAY-2023 08:39:50

Copyright (c) 1997, 2022, Oracle.  All rights reserved.

Used parameter files:
/u01/app/oracle/product/19.3.0/db_1/network/admin/sqlnet.ora

Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.18)(PORT=1521)))
TNS-12543: TNS:destination host unreachable

3.网络层面排查1521端口

以db11g环境为例说明:

[oracle@db11g ~]$ netstat -ano|grep 1521
tcp6       0      0 :::1521                 :::*                    LISTEN      off (0.00/0/0)
unix  2      [ ACC ]     STREAM     LISTENING     26303    /var/tmp/.oracle/sEXTPROC1521

使用telnet工具定位:

[root@bogon ~]# telnet 192.168.1.18 1521
Trying 192.168.1.18...
telnet: connect to address 192.168.1.18: No route to host

而正常的环境(其他可以tnsping的正常虚机)应该类似这样:

[root@bogon ~]# telnet 192.168.1.11 1521
Trying 192.168.1.11...
Connected to 192.168.1.11.
Escape character is '^]'.

看来的确是网络问题了。 说没有路由可达主机,直接traceroute对比看下有何区别:

# 正常的虚机:
[root@bogon ~]# traceroute 192.168.1.11
traceroute to 192.168.1.11 (192.168.1.11), 30 hops max, 60 byte packets
 1  bogon (192.168.1.11)  0.556 ms  0.507 ms  0.486 ms

# 不正常的虚机:
[root@bogon ~]# traceroute 192.168.1.18
traceroute to 192.168.1.18 (192.168.1.18), 30 hops max, 60 byte packets
 1  bogon (192.168.1.18)  0.516 ms !X  0.450 ms !X  0.404 ms !X

[root@bogon ~]# traceroute 192.168.1.19
traceroute to 192.168.1.19 (192.168.1.19), 30 hops max, 60 byte packets
 1  bogon (192.168.1.19)  0.546 ms !X  0.491 ms !X  0.455 ms !X

[root@bogon ~]# traceroute 192.168.1.20
traceroute to 192.168.1.20 (192.168.1.20), 30 hops max, 60 byte packets
 1  localhost (192.168.1.20)  0.730 ms !X  0.680 ms !X  0.648 ms !X

又回到防火墙。。之前检查命令搞错了,来吧,赶紧正常关闭防火墙:

[root@db11g ~]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
   Active: active (running) since Sat 2023-05-13 08:38:13 CST; 23min ago
     Docs: man:firewalld(1)
 Main PID: 850 (firewalld)
   CGroup: /system.slice/firewalld.service
           └─850 /usr/bin/python2 -Es /usr/sbin/firewalld --nofork --nopid

May 13 08:38:12 db11g systemd[1]: Starting firewalld - dynamic firewall dae.....
May 13 08:38:13 db11g systemd[1]: Started firewalld - dynamic firewall daemon.
May 13 08:38:13 db11g firewalld[850]: WARNING: AllowZoneDrifting is enabled...w.
Hint: Some lines were ellipsized, use -l to show in full.
[root@db11g ~]# systemctl stop firewalld

一切恢复正常:

[root@bogon ~]# traceroute 192.168.1.18
traceroute to 192.168.1.18 (192.168.1.18), 30 hops max, 60 byte packets
 1  bogon (192.168.1.18)  0.559 ms  0.497 ms  0.445 ms
[root@bogon ~]# telnet 192.168.1.18 1521
Trying 192.168.1.18...
Connected to 192.168.1.18.
Escape character is '^]'.

[oracle@bogon ~]$ tnsping 192.168.1.18

TNS Ping Utility for Linux: Version 19.0.0.0.0 - Production on 13-MAY-2023 08:59:56

Copyright (c) 1997, 2022, Oracle.  All rights reserved.

Used parameter files:
/u01/app/oracle/product/19.3.0/db_1/network/admin/sqlnet.ora

Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.18)(PORT=1521)))
OK (0 msec)

克隆的环境全部都关闭下防火墙,并禁用:

systemctl status firewalld
systemctl stop firewalld
systemctl disable firewalld

一切正常!

这个根因找到后着实有点丢人了,折腾半天居然就是最开始怀疑的防火墙问题,但却因为命令搞错误判了。 记得早些时候这个Linux6查看防火墙的命令在Linux7中执行,重定向是可以变成正确命令的。 再就是应该多查下,如果是类似下面的输出才是没有防火墙运行:

[root@db11g ~]# /sbin/iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         

不过troubleshooting的有意思之处也就在于此,你总不能每次都可以快速解决问题,哪怕是相对简单的问题,也可能因为一个疏忽而走不少弯路,但这个过程是有意思的!

本文参与 腾讯云自媒体分享计划,分享自作者个人站点/博客。
原始发表:2023-05-13,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • 1.检查防火墙和SElinux状态
  • 2.确认克隆的网卡是否正常
  • 3.网络层面排查1521端口
相关产品与服务
专用宿主机
专用宿主机(CVM Dedicated Host,CDH)提供用户独享的物理服务器资源,满足您资源独享、资源物理隔离、安全、合规需求。专用宿主机搭载了腾讯云虚拟化系统,购买之后,您可在其上灵活创建、管理多个自定义规格的云服务器实例,自主规划物理资源的使用。
领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档