修改PJSIP支持webrtc回声消除处理
原创
1、编译
支持webrtc-aec
./configure --host=arm-openwrt-linux-muslgnueabi --prefix=$PWD/install --disable-libwebrtc --disable-libyuv --disable-v4l2 --disable-opencore-amrnb --disable-speex-codec --disable-speex-aec --with-openh264=/home/lyz/work/broadcast_app/app/thirds_libs_src/pjproject-2.12.1/third_party/openh264-2.3.1 --enable-libwebrtc-aec3 --with-opus=/home/lyz/work/broadcast_app/app/thirds_libs_src/pjproject-2.12.1/third_party/opus/
支持外部webrtc
./configure --host=arm-openwrt-linux-muslgnueabi --prefix=$PWD/install --enable-libwebrtc --disable-libyuv --disable-v4l2 --disable-opencore-amrnb --disable-speex-codec --disable-speex-aec --with-openh264=/home/lyz/work/broadcast_app/app/thirds_libs_src/pjproject-2.12.1/third_party/openh264-2.3.1 --disable-libwebrtc-aec3 --with-opus=/home/lyz/work/broadcast_app/app/thirds_libs_src/pjproject-2.12.1/third_party/opus/
2、代码修改：增加两个方法处理播放和录制；
PJ_DEF(pj_status_t) webrtc_aec_cancel_echo_playback(void *state,
pj_int16_t *play_frm ){
webrtc_ec *echo = (webrtc_ec*) state;
unsigned i, j, frm_idx = 0;
int status;
const sample * buf_ptr;
for(i = echo->samples_per_frame / echo->subframe_len; i > 0; i--) {
#if PJMEDIA_WEBRTC_AEC_USE_MOBILE
buf_ptr = &play_frm[frm_idx];
#else
for (j = 0; j < echo->subframe_len; j++) {
echo->tmp_buf2[j] = play_frm[frm_idx+j];
}
buf_ptr = echo->tmp_buf2;
#endif
/* Feed farend buffer */
status = WebRtcAec_BufferFarend(echo->AEC_inst, buf_ptr,
echo->subframe_len);
frm_idx+= echo->subframe_len;
}
return PJ_SUCCESS;
}
PJ_DEF(pj_status_t) webrtc_aec_cancel_echo_capture(void *state,
pj_int16_t *rec_frm,
unsigned options ){
webrtc_ec *echo = (webrtc_ec*) state;
int status;
unsigned i, j, frm_idx = 0;
const sample * buf_ptr;
sample * out_buf_ptr;
for(i = echo->samples_per_frame / echo->subframe_len; i > 0; i--) {
#if PJMEDIA_WEBRTC_AEC_USE_MOBILE
buf_ptr = &rec_frm[frm_idx];
#else
for (j = 0; j < echo->subframe_len; j++) {
echo->tmp_buf[j] = rec_frm[frm_idx+j];
echo->tmp_buf2[j] = NULL;
}
buf_ptr = echo->tmp_buf2;
#endif
buf_ptr = echo->tmp_buf;
out_buf_ptr = echo->tmp_buf2;
#if PJMEDIA_WEBRTC_AEC_USE_MOBILE
status = WebRtcAecm_Process(echo->AEC_inst, &rec_frm[frm_idx],
(echo->NS_inst? buf_ptr: NULL),
out_buf_ptr, echo->subframe_len,
echo->tail);
#else
status = WebRtcAec_Process(echo->AEC_inst, &buf_ptr,
echo->channel_count, &out_buf_ptr,
echo->subframe_len, (int16_t)echo->tail, 0);
#endif
if (status != 0) {
print_webrtc_aec_error("Process echo", echo->AEC_inst);
return PJ_EUNKNOWN;
}
for (j = 0; j < echo->subframe_len; j++) {
rec_frm[frm_idx++] = (pj_int16_t)out_buf_ptr[j];
}
}
return PJ_SUCCESS;
}
/*
* WebRTC AEC prototypes
*/
#if defined(PJMEDIA_HAS_WEBRTC_AEC) && PJMEDIA_HAS_WEBRTC_AEC!=0
static struct ec_operations webrtc_aec_op =
{
"WebRTC AEC",
&webrtc_aec_create,
&webrtc_aec_destroy,
&webrtc_aec_reset,
&webrtc_aec_cancel_echo,
&webrtc_aec_cancel_echo_playback,
&webrtc_aec_cancel_echo_capture,
&webrtc_aec_get_stat
};
#endif"pjlib/include/pj/config_site.h"
支持外部webrtc
#define PJMEDIA_HAS_WEBRTC_AEC 1
# define PJMEDIA_WEBRTC_AEC_USE_MOBILE 1
支持webrtc_aec3
#ifdef PJMEDIA_HAS_WEBRTC_AEC3
#undef PJMEDIA_HAS_WEBRTC_AEC3
#define PJMEDIA_HAS_WEBRTC_AEC3 1
#endif
修改default.conf文件配置pjsua_app的启动配置文件支持回声消除：
#webrtc echo
--ec-opt=3
#webrtc-aec3 echo
#--ec-opt=4
#--stereo
--ec-tail=75
参考：
https://github.com/pjsip/pjproject/issues/1954
https://my.oschina.net/mingyuejingque/blog/5083785
原创声明：本文系作者授权腾讯云开发者社区发表，未经许可，不得转载。
如有侵权，请联系 cloudcommunity@tencent.com 删除。
原创声明：本文系作者授权腾讯云开发者社区发表，未经许可，不得转载。
如有侵权，请联系 cloudcommunity@tencent.com 删除。