blocks|key|3372767|text|进程选项卡上的“结束进程”调用TerminateProcess，这是Windows所知道的杀死进程的最终极方法。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|3372768|如果它没有消失，那么它当前被锁定，等待某个内核资源(可能是一个有buggy的驱动程序)，并且没有任何方法(除了重新启动)可以让这个进程消失。|3372769|看看这篇博客-来自wayback+when：http://blogs.technet.com/markrussinovich/archive/2005/08/17/unkillable-processes.aspx|3372770|3372771|正常情况下，不间断睡眠应该不会持续很长时间，但在Windows下，损坏的驱动程序或损坏的用户空间程序(没有exec的vfork)可能会永远在D中休眠。|3372772|entityMap|0|LINK|mutability|MUTABLE|url|http://blogs.technet.com/markrussinovich/archive/2005/08/17/unkillable-processes.aspx^0|F|G|0|0|M|2D|0|0|0|1H|4|1M|5|1Y|1|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|Y|8|@]|D|@$9|Z|A|10|1|11]]|E|$]]|$1|J|3|-4|5|6|7|12|8|@]|D|@]|E|$]]|$1|K|3|L|5|6|7|13|8|@$9|14|A|15|B|C]|$9|16|A|17|B|C]|$9|18|A|19|B|C]]|D|@]|E|$]]|$1|M|3|-4|5|6|7|1A|8|@]|D|@]|E|$]]]|N|$O|$5|P|Q|R|E|$S|T]]]]

"End Process" on the Processes-Tab calls <code>TerminateProcess</code> which is the most ultimate way Windows knows to kill a process.

If it doesn't go away, it's currently locked waiting on some kernel resource (probably a buggy driver) and there is nothing (short of a reboot) you could do to make the process go away.

Have a look at this blog-entry from wayback when: <a href="http://blogs.technet.com/markrussinovich/archive/2005/08/17/unkillable-processes.aspx" rel="noreferrer">http://blogs.technet.com/markrussinovich/archive/2005/08/17/unkillable-processes.aspx</a>

Unix based systems like Linux also have that problem where processes could survive a <code>kill -9</code> if they are in what's known as "Uninterruptible sleep" (shown by top and ps as state <code>D</code>) at which point the processes sleep so well that they can't process incoming signals (which is what <code>kill</code> does - sending signals).

Normally, Uninterruptible sleep should not last long, but as under Windows, broken drivers or broken userpace programs (<code>vfork</code> without <code>exec</code>) can end up sleeping in <code>D</code> forever.

blocks|key|368880|text|taskkill+/im+myprocess.exe+/f|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|368881|"/f“代表”力“。如果您知道PID，则可以指定它，如下所示：|unstyled|368882|taskkill+/pid+1234+/f|368883|还有很多其他选项，只需输入taskkill+/？对他们所有人来说。"/t“选项可以杀死一个进程和所有子进程；这可能对您很有用。|368884|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|N|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$B|C]]|$1|I|3|J|5|F|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|F|7|Q|8|@]|9|@]|A|$]]]|L|$]]

<pre><code>taskkill /im myprocess.exe /f
</code></pre>

The "/f" is for "force".
If you know the PID, then you can specify that, as in:

<pre><code>taskkill /pid 1234 /f
</code></pre>

Lots of other options are possible, just type taskkill /? for all of them. The "/t" option kills a process and any child processes; that may be useful to you.

blocks|key|3160268|text|有许多杀死进程的方法。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3160269|​|3160270|📷|atomic|offset|length|3160271|3160272|(右键单击进程，然后转到其他->终结器。)|3160273|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/9aa141335a91a5faa5e7f2e94b7719d0.png|imageAlt^0|0|0|0|1|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|W|8|@]|9|@$G|X|H|Y|1|Z]]|A|$]]|$1|I|3|C|5|6|7|10|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|11|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|S|T|-4]]]]

<a href="http://processhacker.sourceforge.net/" rel="noreferrer">Process Hacker</a> has numerous ways of killing a process.

<img src="https://i.stack.imgur.com/ByAnj.png" alt="">

(Right-click the process, then go to Miscellaneous->Terminator.)

blocks|key|364216|text|JosepStyons是对的。打开cmd.exe并运行|type|unstyled|depth|inlineStyleRanges|entityRanges|data|364217|taskkill+/im+processname.exe+/f|code-block|syntax|javascript|364218|如果有错误说，|364219|364220|错误:无法终止PID为1234的进程"process.exe“。原因:访问被拒绝。|blockquote|364221|364222|364223|然后尝试以管理员身份运行cmd.exe。|364224|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|V|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|W|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|X|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|Z|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|10|8|@]|9|@]|A|$]]]|R|$]]

JosepStyons is right. Open cmd.exe and run

<pre><code>taskkill /im processname.exe /f
</code></pre>

If there is an error saying,

<blockquote>
 ERROR: The process "process.exe" with PID 1234 could not be
 terminated.
 Reason: Access is denied.
</blockquote>

then try running cmd.exe as administrator.

blocks|key|365753|text|从sysinternals+(现在是Microsoft)获取进程资源管理器|type|unstyled|depth|inlineStyleRanges|entityRanges|data|365754|Process+Explorer+-+Windows+Sysinternals+%7C+Microsoft+Docs|offset|length|365755|entityMap|0|LINK|mutability|MUTABLE|url|http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx^0|0|0|1K|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@$D|P|E|Q|1|R]]|A|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|M]]]]

Get process explorer from sysinternals (now Microsoft)

<a href="http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx" rel="nofollow noreferrer">Process Explorer - Windows Sysinternals | Microsoft Docs</a>

blocks|key|3160199|text|一个不错的技巧是附加调试器，然后退出调试器。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3160200|在XP或Windows+2003上，您可以使用开箱即用的ntsd完成此操作：|3160201|ntsd+-pn+myapp.exe|code-block|syntax|javascript|3160202|ntsd将打开一个新窗口。只需在窗口中键入'q‘即可退出调试器并取出进程。|3160203|我知道，即使任务管理器似乎不能杀死一个进程，这种方法也能起作用。|3160204|不幸的是，ntsd已从Vista中删除，您必须安装(免费)+debbugging+tools+for+windows才能获得合适的调试器。|offset|length|3160205|entityMap|0|LINK|mutability|MUTABLE|url|http://www.microsoft.com/whdc/DevTools/Debugging/default.mspx^0|0|0|0|0|0|U|S|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Z|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|10|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|11|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|12|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|13|8|@]|9|@$O|14|P|15|1|16]]|A|$]]|$1|Q|3|-4|5|6|7|17|8|@]|9|@]|A|$]]]|R|$S|$5|T|U|V|A|$W|X]]]]

One trick that works well is to attach a debugger and then quit the debugger.

On XP or Windows 2003 you can do this using ntsd that ships out of the box:

<pre><code>ntsd -pn myapp.exe
</code></pre>

ntsd will open up a new window. Just type 'q' in the window to quit the debugger and take out the process.

I've known this to work even when task manager doesn't seem able to kill a process.

Unfortunately ntsd was removed from Vista and you have to install the (free) <a href="http://www.microsoft.com/whdc/DevTools/Debugging/default.mspx" rel="noreferrer">debbugging tools for windows</a> to get a suitable debugger.

blocks|key|3160242|text|设置AT命令，将任务管理器或进程资源管理器作为系统运行。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3160243|AT+12:34+/interactive+"C:/procexp.exe"|code-block|syntax|javascript|3160244|如果进程资源管理器在您的根C驱动器，那么这将打开它作为系统，您可以杀死任何进程，而不会得到任何访问被拒绝的错误。将此设置为未来的一分钟，然后它将为您弹出。|3160245|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

setup an AT command to run task manager or process explorer as SYSTEM.

<pre><code>AT 12:34 /interactive "C:/procexp.exe"
</code></pre>

If process explorer was in your root C drive then this would open it as SYSTEM and you could kill any process without getting any access denied errors. Set this for like a minute in the future, then it will pop up for you.

blocks|key|3373085|text|我也遇到过这个问题，下面是我是如何解决它的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3373086|1/打开«>任务管理器«>|3373087|2/在列表中找到应用程序名称|3373088|3/找到后，右键单击其名称，然后单击«属性»|3373089|4/在属性界面中，单击«安全«。|3373090|5/单击«编辑»以更改权限|3373091|6/«拒绝所有用户的所有权限»单击«应用»然后单击«确定»|3373092|7/点击«高级设置»查看特殊权限设置|3373093|8/删除所有用户的权限|3373094|9/点击«应用»然后«确定»|3373095|10/再次点击«应用»然后«确定»|3373096|11/你现在可以在任务管理器上杀死进程，也可以卸载你想要的应用程序。|3373097|entityMap^0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|10|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|11|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|12|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|13|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|14|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|15|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|16|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|17|8|@]|9|@]|A|$]]|$1|R|3|S|5|6|7|18|8|@]|9|@]|A|$]]|$1|T|3|U|5|6|7|19|8|@]|9|@]|A|$]]|$1|V|3|W|5|6|7|1A|8|@]|9|@]|A|$]]|$1|X|3|-4|5|6|7|1B|8|@]|9|@]|A|$]]]|Y|$]]

I had this issue too, here is how I solved it.
1/ Open the « task manager « 
2/ Locate the application name in the list
3/ Once found, right click on its name then click on « properties »
4/ In the properties interface, click on « security « 
5/ Click on « edit » to change permissions
6/ « Deny » all permissions for all users, click on «  apply » then « ok »
7/ click on « advanced » for special permissions settings
8/ Remove permissions for all users
9/ click on «  apply » then « ok »
10/ click on «  apply » then « ok » again
11/ you can now kill the process on task manager as well as uninstall the app of you want to.

blocks|key|364195|text|当ntsd访问被拒绝时，尝试：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|364196|ZeroWave被设计成一个简单的工具，它将为任何类型的进程提供多级终止。|364197|由于其简单的安装和非常友好的图形界面，ZeroWave也是一个易于使用的程序。|364198|ZeroWave有三种终止模式，其中“疯狂”模式可以终止任何可以在Windows上运行的进程。|364199|看起来ZeroWave杀不了avp.exe|364200|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|N|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|O|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

When ntsd access is denied, try:

ZeroWave was designed to be a simple tool that will provide a multilevel termination of any kind of process.

ZeroWave is also a easy-to-use program due to its simple installation and its very friendly graphical interface.

ZeroWave has three termination modes and with the "INSANE" mode can terminate any kind of process that can run on Windows.

It seems that ZeroWave can't kill avp.exe

blocks|key|3160275|text|仅供参考，您有时可以使用系统或可信任安装程序来终止任务;)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3160276|谷歌quickkill_3_0.bat|3160277|sc+config+TrustedInstaller+binPath=+"cmd+/c+TASKKILL+/F++/IM+notepad.exe
sc+start+"TrustedInstaller"|code-block|syntax|javascript|3160278|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

FYI you can sometimes use SYSTEM or Trustedinstaller to kill tasks ;)

google quickkill_3_0.bat

<pre><code>sc config TrustedInstaller binPath= "cmd /c TASKKILL /F /IM notepad.exe
sc start "TrustedInstaller"
</code></pre>

Occasionally a program on a Windows machine goes crazy and just hangs. So I'll call up the task manager and hit the "End Process" button for it. However, this doesn't always work; if I try it enough times then it'll usually die eventually, but I'd really like to be able to just kill it immediately. On Linux I could just <code>kill -9</code> to guarantee that a process will die.

This also could be used for writing batch scripts and writing batch scripts is programming.

Is there some program or command that comes with Windows that will always kill a process? A free third-party app would be fine, although I'd prefer to be able to do this on machines I sit down at for the first time.

Really killing a process in Windows

偶尔，Windows机器上的程序会变得疯狂并挂起。因此，我将调用任务管理器，并为它点击“结束进程”按钮。然而，这并不总是有效的；如果我尝试了足够多的次数，它通常最终会死掉，但我真的希望能够立即杀死它。在Linux上，我可以通过kill -9来保证一个进程将会死亡。这也可以用于编写批处理脚本和编写批处理脚本是编程。 Windows有没有什么程序或命令总能杀死一个进程？一个免费的第三方应用程序就可以了

问在Windows中真的杀死一个进程
EN

回答 10

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在Windows中真的杀死一个进程EN

回答 10

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在Windows中真的杀死一个进程
EN