blocks|key|481448|text|我用的是后向性爱。绑定到ESC-left。然后按ESC键-正确返回您所在的位置|type|unstyled|depth|inlineStyleRanges|entityRanges|data|481449|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

backward-sexp is what I use. bound to ESC-left. Then ESC-right to get back to where you were

blocks|key|697426|text|第一件可能有帮助的事情是了解这个选项，如果你还不知道的话：blink-matching-paren-distance。如果sexp非常大，那么您需要增加选项值，否则paren+matching过早放弃，当没有不匹配时，它会显示不匹配。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|697427|第二件有用的事情是确保blink-matching-paren和blink-matching-paren-on-screen都是非nil的。然后，要查看开始分隔符，只需删除结束分隔符，然后再次键入它。当你插入它的时候，开头的那个会变得很明显。|697428|entityMap^0|T|T|0|B|K|W|U|1T|3|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]|$9|P|A|Q|B|C]|$9|R|A|S|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|I|$]]

The first thing that might help is knowing about this option, if you don't already: <code>blink-matching-paren-distance</code>. If the sexp is very large then you need to increase the option value, or else paren matching gives up too soon and it shows a mismatch when there is no mismatch.

The second thing that can help is to be sure that <code>blink-matching-paren</code> and <code>blink-matching-paren-on-screen</code> are both non-<code>nil</code>. Then, to see the opening delimiter, just delete the closing delimiter and then type it again. When you insert it, the opening one will be made evident.

blocks|key|481587|text|这实际上是一个非常标准的绑定:默认情况下使用C-M-f和C-M-b来回移动。在大多数模式下，C-M-f会把你带到匹配的大括号，而C-M-b会把你带回匹配的大括号。这也适用于像引号这样的东西，几乎相同的方式。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|481588|如果您已经使用C-f和C-b进行导航，那么这些绑定很容易记住。(如果你不这样做，你就应该这样做。)它们就像是由一个角色向前和向后移动，通过表情移动(这取决于模式)。|481589|entityMap^0|M|5|S|5|1A|5|1S|5|0|7|3|B|3|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]|$9|Q|A|R|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|S|8|@$9|T|A|U|B|C]|$9|V|A|W|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|X|8|@]|D|@]|E|$]]]|I|$]]

This is actually a very standard binding: <code>C-M-f</code> and <code>C-M-b</code> to go back and forwards by default. In most modes <code>C-M-f</code> will take you forwards to the matching brace and <code>C-M-b</code> will take you backwards to the matching brace. This also works for things like quotes, pretty much the same way. 

These bindings are easy to remember if you already use <code>C-f</code> and <code>C-b</code> for navigation. (If you don't, you should.) They're just like moving forward and backwards by a character lifted to moving by expression (which depends on mode).

blocks|key|481625|text|试试mic+paren，它会显示匹配的括号代码，即使在当前屏幕之外也是如此。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|481626|entityMap|0|LINK|mutability|MUTABLE|url|http://www.emacswiki.org/emacs/MicParen^0|2|9|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

Try <a href="http://www.emacswiki.org/emacs/MicParen" rel="nofollow">mic paren</a> which shows matching parenthesis code even if found outside the present screen.

blocks|key|697604|text|(defun+px-match-paren+(arg)
++"Go+to+the+matching+paren+if+on+a+paren;+otherwise+insert+<key>."
++(interactive+"p")
++(cond
+++((char-equal+41+(char-before))+(backward-list+1))
+++((char-equal+125+(char-before))+(backward-list+1))
+++((and
+++++(char-equal+123+(char-before))
+++++(char-equal+10+(char-after)))
++++(backward-char+1)+(forward-list+1))
+++((looking-at+"\\s$")+(forward-list+1))
+++((looking-at+"\\s$")+(backward-list+1))
+++(t+(self-insert-command+(or+arg+1)))))|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|697605|绑定此命令的<key>将切换左大括号和右大括号(如果指针在它之前或之后)，否则插入<key>+(很像vi的"%25")|unstyled|offset|length|style|CODE|697606|我还将C-<key>绑定到forward-sexp，将C-S-<key>绑定到backward-sexp，这样我就可以真正快速地浏览文件中的函数。|697607|entityMap^0|0|6|5|15|5|0|3|7|D|C|R|9|13|D|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|P|8|@$G|Q|H|R|I|J]|$G|S|H|T|I|J]]|9|@]|A|$]]|$1|K|3|L|5|F|7|U|8|@$G|V|H|W|I|J]|$G|X|H|Y|I|J]|$G|Z|H|10|I|J]|$G|11|H|12|I|J]]|9|@]|A|$]]|$1|M|3|-4|5|F|7|13|8|@]|9|@]|A|$]]]|N|$]]

<pre><code>(defun px-match-paren (arg)
 "Go to the matching paren if on a paren; otherwise insert &lt;key&gt;."
 (interactive "p")
 (cond
 ((char-equal 41 (char-before)) (backward-list 1))
 ((char-equal 125 (char-before)) (backward-list 1))
 ((and
 (char-equal 123 (char-before))
 (char-equal 10 (char-after)))
 (backward-char 1) (forward-list 1))
 ((looking-at "\\s$") (forward-list 1))
 ((looking-at "\\s$") (backward-list 1))
 (t (self-insert-command (or arg 1)))))
</code></pre>

The <code>&lt;key&gt;</code> to witch you bind this command will toggle opening and closing brace if point is before or after it, otherwise insert <code>&lt;key&gt;</code> (much like vi's "%")

I also bind <code>C-&lt;key&gt;</code> to <code>forward-sexp</code> and <code>C-S-&lt;key&gt;</code> to <code>backward-sexp</code> so I can really quickly navigate through functions in the file.

In GNU Emacs there is a feature to highlight matching brackets in code with the same colour. 

However when the code which the brackets enclose is really long with several nested if's for's etc. then this feature is not really useful since one of the brackets will not be visible.

Say I have the following,

<pre class="lang-c prettyprint-override"><code>for(int i=0; i&lt; N; ++i)
 {
 /*Long code*/

 } 
</code></pre>

If my cursor is on the <code>}</code> brace I would like to have some feature which will enable me to jump / see the <code>{</code> brace, and then , if satisfied, come back to the <code>}</code> brace for any future coding.

Is this possible in Emacs?

Matching braces in Emacs

在GNU Emacs中，有一个功能可以用相同的颜色在代码中突出显示匹配的括号。但是，当括号中包含的代码非常长，并且有几个嵌套的if、for等，那么这个特性就没有多大用处了，因为其中一个括号将不可见。假设我有以下内容，for(int i=0; i< N; ++i) { /*Long code*/ } 如果我的光标在}大...

问Emacs中的匹配大括号
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Emacs中的匹配大括号EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Emacs中的匹配大括号
EN