blocks|key|246362|text|如果你不需要使用JBoss的代理，并且mydomain.com:8080可以“暴露”给世界，那么我会这么做。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|246363|<VirtualHost+*:80>
++ServerName+mydomain.com
++Redirect+301+/+http://mydomain.com:8080/
</VirtualHost>|code-block|syntax|javascript|246364|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

If you don't have to use a proxy to JBoss and mydomain.com:8080 can be "exposed" to the world, then I would do this.

<pre><code>&lt;VirtualHost *:80&gt;
 ServerName mydomain.com
 Redirect 301 / http://mydomain.com:8080/
&lt;/VirtualHost&gt;
</code></pre>

blocks|key|247417|text|Apache支持基于名称和基于IP的虚拟主机。看起来你同时使用了这两种方法，这可能不是你需要的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|247418|我认为您实际上是在尝试设置name-based+virtual+hosting，并且不需要指定IP地址。|offset|length|247419|尝试<+VirtualHost+*:80>以绑定到所有IP地址，除非您确实需要ip+based+virtual+hosting。如果服务器有多个IP地址，并且您希望为不同地址上的不同站点提供服务，则可能会出现这种情况。最常见的设置是(我猜)基于名称的虚拟主机。|247420|entityMap|0|LINK|mutability|MUTABLE|url|http://httpd.apache.org/docs/2.2/vhosts/name-based.html|1|http://httpd.apache.org/docs/2.2/vhosts/ip-based.html^0|0|D|Q|0|0|13|O|1|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@$D|T|E|U|1|V]]|A|$]]|$1|F|3|G|5|6|7|W|8|@]|9|@$D|X|E|Y|1|Z]]|A|$]]|$1|H|3|-4|5|6|7|10|8|@]|9|@]|A|$]]]|I|$J|$5|K|L|M|A|$N|O]]|P|$5|K|L|M|A|$N|Q]]]]

Apache supports name based and IP based virtual hosts. It looks like you are using both, which is probably not what you need.

I think you're actually trying to set up <a href="http://httpd.apache.org/docs/2.2/vhosts/name-based.html" rel="nofollow">name-based virtual hosting</a>, and for that you don't need to specify the IP address.

Try &lt; VirtualHost *:80> to bind to all IP addresses, unless you really want <a href="http://httpd.apache.org/docs/2.2/vhosts/ip-based.html" rel="nofollow">ip based virtual hosting</a>. This may be the case if the server has several IP addresses, and you want to serve different sites on different addresses. The most common setup is (I would guess) name based virtual hosts.

blocks|key|3133326|text|你需要两样东西：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3133327|3133328|将ServerAlias+www.mydomain.com添加到您的配置|ordered-list-item|offset|length|style|CODE|3133329|将您的代理更改为ProxyPassMatch+%5E(.*)$+http://localhost:8080/example$1，以尽可能避免mod_dir和尾部斜杠干扰。|3133330|3133331|entityMap^0|0|0|1|S|0|8|1H|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|Q|8|@$F|R|G|S|H|I]]|9|@]|A|$]]|$1|J|3|K|5|E|7|T|8|@$F|U|G|V|H|I]]|9|@]|A|$]]|$1|L|3|-4|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|N|$]]

You need 2 things:

<ol>
<li>Add a <code>ServerAlias www.mydomain.com</code> to your config</li>
<li>change your proxypass to <code>ProxyPassMatch ^(.*)$ http://localhost:8080/example$1</code>, to possibly keep mod_dir and trailing slashes from interferring.</li>
</ol>

blocks|key|246375|text|您应该在ProxyPass和ProxyPassReverse中省略域http://example.com，并将其保留为/。此外，您需要将example/末尾的/保留到它要重定向的位置。此外，我在使用http://example.com和http://www.example.com时遇到了一些麻烦--只有www才能工作，直到我开发了ServerName+www.example.com和ServerAlias+example.com。试一试下面的内容。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|246376|<VirtualHost+*:80>+
++ProxyPreserveHost+On
++ProxyRequests+Off
++ServerName+www.example.com
++ServerAlias+example.com
++ProxyPass+/+http://localhost:8080/example/
++ProxyPassReverse+/+http://localhost:8080/example/
</VirtualHost>+|code-block|syntax|javascript|246377|完成这些更改后，添加所需的模块并重新启动apache|246378|sudo+a2enmod+proxy+&&+sudo+a2enmod+proxy_http+&&+sudo+service+apache2+restart|246379|entityMap^0|Y|I|1N|1|1W|8|27|1|2R|I|3A|M|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]|$9|T|A|U|B|C]|$9|V|A|W|B|C]|$9|X|A|Y|B|C]|$9|Z|A|10|B|C]|$9|11|A|12|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|13|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|14|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|15|8|@]|D|@]|E|$I|J]]|$1|O|3|-4|5|6|7|16|8|@]|D|@]|E|$]]]|P|$]]

You should leave out the domain <code>http://example.com</code> in ProxyPass and ProxyPassReverse and leave it as <code>/</code>. Additionally, you need to leave the <code>/</code> at the end of <code>example/</code> to where it is redirecting. Also, I had some trouble with <code>http://example.com</code> vs. <code>http://www.example.com</code> - only the www worked until I made the ServerName www.example.com, and the ServerAlias example.com. Give the following a go.

<pre><code>&lt;VirtualHost *:80&gt; 
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName www.example.com
 ServerAlias example.com
 ProxyPass / http://localhost:8080/example/
 ProxyPassReverse / http://localhost:8080/example/
&lt;/VirtualHost&gt; 
</code></pre>

After you make these changes, add the needed modules and restart apache

<pre><code>sudo a2enmod proxy &amp;&amp; sudo a2enmod proxy_http &amp;&amp; sudo service apache2 restart
</code></pre>

blocks|key|3133348|text|我用下面的代码解决了这个问题：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3133349|LoadModule+proxy_module+modules/mod_proxy.so
LoadModule+proxy_http_module+modules/mod_proxy_http.so
<VirtualHost+*:80>
ProxyPreserveHost+On
ProxyRequests+Off
ServerName+myhost.com
ServerAlias+ww.myhost.com
ProxyPass+/+http://localhost:8080/
ProxyPassReverse+/+http://localhost:8080/
</VirtualHost>|code-block|syntax|javascript|3133350|我还使用了：|3133351|a2enmod+proxy_http|3133352|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I solved this issue with the following code:

<pre><code>LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_http_module modules/mod_proxy_http.so
&lt;VirtualHost *:80&gt;
ProxyPreserveHost On
ProxyRequests Off
ServerName myhost.com
ServerAlias ww.myhost.com
ProxyPass / http://localhost:8080/
ProxyPassReverse / http://localhost:8080/
&lt;/VirtualHost&gt;
</code></pre>

I also used:

<pre><code>a2enmod proxy_http
</code></pre>

blocks|key|3133380|text|我想要这样做，这样我就可以从根域访问Jenkins。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3133381|我发现我必须禁用默认站点才能使其正常工作。这就是我所做的。|3133382|$+sudo+vi+/etc/apache2/sites-available/jenkins|code-block|syntax|javascript|3133383|并将其插入到文件中：|3133384|<VirtualHost+*:80>
++ProxyPreserveHost+On
++ProxyRequests+Off
++ServerName+mydomain.com
++ServerAlias+mydomain
++ProxyPass+/+http://localhost:8080/
++ProxyPassReverse+/+http://localhost:8080/
++<Proxy+*>
++++++++Order+deny,allow
++++++++Allow+from+all
++</Proxy>
</VirtualHost>|3133385|接下来，您需要启用/禁用相应的站点：|3133386|$+sudo+a2ensite+jenkins
$+sudo+a2dissite+default
$+sudo+service+apache2+reload|3133387|希望这能帮助到别人。|3133388|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|W|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|X|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|Z|8|@]|9|@]|A|$]]|$1|O|3|P|5|F|7|10|8|@]|9|@]|A|$G|H]]|$1|Q|3|R|5|6|7|11|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

I wanted to do exactly this so I could access Jenkins from the root domain. 

I found I had to disable the default site to get this to work. Here's exactly what I did.

<pre><code>$ sudo vi /etc/apache2/sites-available/jenkins
</code></pre>

And insert this into file:

<pre><code>&lt;VirtualHost *:80&gt;
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName mydomain.com
 ServerAlias mydomain
 ProxyPass / http://localhost:8080/
 ProxyPassReverse / http://localhost:8080/
 &lt;Proxy *&gt;
 Order deny,allow
 Allow from all
 &lt;/Proxy&gt;
&lt;/VirtualHost&gt;
</code></pre>

Next you need to enable/disable the appropriate sites:

<pre><code>$ sudo a2ensite jenkins
$ sudo a2dissite default
$ sudo service apache2 reload
</code></pre>

Hope it helps someone.

blocks|key|244843|text|只需在apache配置中(直接)使用反向代理：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|244844|ProxyPass+/foo+http://foo.example.com/bar
ProxyPassReverse+/foo+http://foo.example.com/bar|code-block|syntax|javascript|244845|Look+here+for+apache+documentation+of+how+to+use+the+mod|offset|length|244846|entityMap|0|LINK|mutability|MUTABLE|url|http://httpd.apache.org/docs/2.2/mod/mod_proxy.html^0|0|0|0|1K|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@$I|V|J|W|1|X]]|A|$]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

Just use a Reverse Proxy in your apache configuration (directly):

<pre><code>ProxyPass /foo http://foo.example.com/bar
ProxyPassReverse /foo http://foo.example.com/bar
</code></pre>

<a href="http://httpd.apache.org/docs/2.2/mod/mod_proxy.html" rel="nofollow">Look here for apache documentation of how to use the mod</a>

blocks|key|246431|text|这可能是一个老问题，但我是这样做的：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|246432|在apache加载的.conf文件中：|246433|<VirtualHost+*:80>
++ServerName+something.com
++ProxyPass+/+http://localhost:8080/
</VirtualHost>|code-block|syntax|javascript|246434|说明:监听对本地机器端口80的所有请求。如果我请求"http://something.com/somethingorother"，则将该请求转发给"http://localhost:8080/somethingorother“。这应该适用于外部访问者，因为根据文档，它将远程请求映射到本地服务器的空间。|offset|length|style|CODE|246435|我运行的是Apache2.4.6-2ubuntu2.2，所以我不确定"-2ubuntu2.2“如何影响这个答案的更广泛的适用性。|246436|完成这些更改后，添加所需的模块并重新启动apache|246437|sudo+a2enmod+proxy+&&+sudo+a2enmod+proxy_http+&&+sudo+service+apache2+restart|246438|entityMap^0|0|0|0|Q|11|22|12|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|Z|8|@$K|10|L|11|M|N]|$K|12|L|13|M|N]]|9|@]|A|$]]|$1|O|3|P|5|6|7|14|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|15|8|@]|9|@]|A|$]]|$1|S|3|T|5|F|7|16|8|@]|9|@]|A|$G|H]]|$1|U|3|-4|5|6|7|17|8|@]|9|@]|A|$]]]|V|$]]

This might be an old question, but here's what I did:

In a .conf file loaded by apache:

<pre><code>&lt;VirtualHost *:80&gt;
 ServerName something.com
 ProxyPass / http://localhost:8080/
&lt;/VirtualHost&gt;
</code></pre>

Explanation: Listen on all requests to the local machine's port 80. If I requested "<code>http://something.com/somethingorother</code>", forward that request to "<code>http://localhost:8080/somethingorother</code>". This should work for an external visitor because, according to the docs, it maps the remote request to the local server's space.

I'm running Apache 2.4.6-2ubuntu2.2, so I'm not sure how the "-2ubuntu2.2" affects the wider applicability of this answer.

After you make these changes, add the needed modules and restart apache

<pre><code>sudo a2enmod proxy &amp;&amp; sudo a2enmod proxy_http &amp;&amp; sudo service apache2 restart
</code></pre>

blocks|key|242731|text|通过反复试验发现了这一点。如果您的配置指定了一个ServerName，那么您的VirtualHost指令也需要执行同样的操作。在下面的示例中，awesome.example.com和amazing.example.com都将被转发到在端口4567上运行的某个本地服务。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|242732|ServerName+example.com:80

<VirtualHost+example.com:80>
++ProxyPreserveHost+On
++ProxyRequests+Off
++ServerName+awesome.example.com
++ServerAlias+amazing.example.com
++ProxyPass+/+http://localhost:4567/
++ProxyPassReverse+/+http://localhost:4567/
</VirtualHost>|code-block|syntax|javascript|242733|我知道这不能准确地回答这个问题，但我之所以把它放在这里，是因为这是Apache端口转发的顶级搜索结果。所以我想总有一天会有帮助的。|242734|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

Found this out by trial and error. If your configuration specifies a ServerName, then your VirtualHost directive will need to do the same. In the following example, awesome.example.com and amazing.example.com would both be forwarded to some local service running on port 4567.

<pre><code>ServerName example.com:80

&lt;VirtualHost example.com:80&gt;
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName awesome.example.com
 ServerAlias amazing.example.com
 ProxyPass / http://localhost:4567/
 ProxyPassReverse / http://localhost:4567/
&lt;/VirtualHost&gt;
</code></pre>

I know this doesn't exactly answer the question, but I'm putting it here because this is the top search result for Apache port forwarding. So I figure it'll help somebody someday.

blocks|key|242736|text|您必须确保在服务器上启用了代理。您可以使用以下命令执行此操作：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|242737|++a2enmod+proxy
++a2enmod+proxy_http

++service+apache2+restart|code-block|syntax|javascript|242738|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You have to make sure that the proxy is enabled on the server. You can do so by using the following commands:

<pre><code> a2enmod proxy
 a2enmod proxy_http

 service apache2 restart
</code></pre>

blocks|key|2919254|text|所有这些都是通过虚拟服务器上的域名访问端口的绝佳见解。但是，不要忘记启用虚拟服务器；这可能会被注释掉：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2919255|NameVirtualHost+*:80
<Directory+"/home/dawba/www/">
+allow+from+all
</Directory>|code-block|syntax|javascript|2919256|我们在sxxxx.com域上运行一台Apache服务器，在端口6800上运行一台golang服务器。有些防火墙似乎会用端口拦截域名。这是我们的解决方案：|2919257|<VirtualHost+*:80>
+ProxyPreserveHost+On
+ProxyRequests+Off
+ServerName+wsgi.sxxxx.com
+DocumentRoot+"/home/dxxxx/www"
++<Directory+"/home/dxxx/www">
++++Options+Indexes+FollowSymLinks
++++AllowOverride+None
++++Order+allow,deny
++++Allow+from+all
++</Directory>
+ScriptAlias+/py/+"/home/dxxxx/www/py/"
+WSGIScriptAlias+/wsgiprog+/home/dxxxx/www/wsgiprog/Form/Start.wsgi
</VirtualHost>

<VirtualHost+*:80>
+ProxyPreserveHost+On
+ProxyRequests+Off
+ServerName+sxxxx.com+
+ServerAlias+www.sxxxx.com
+ProxyPass+/+http://localhost:6800/
+ProxyPassReverse+/+http://localhost:6800/
</VirtualHost>|2919258|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

All are excellent insights to accessing ports via domain names on virtual servers. Do not forget, however, to enable virtual servers; this may be commented out:

<pre><code>NameVirtualHost *:80
&lt;Directory "/home/dawba/www/"&gt;
 allow from all
&lt;/Directory&gt;
</code></pre>

We run WSGI with an Apache server at the domain sxxxx.com and a golang server running on port 6800. Some firewalls seem to block domain names with ports. This was our solution:

<pre><code>&lt;VirtualHost *:80&gt;
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName wsgi.sxxxx.com
 DocumentRoot "/home/dxxxx/www"
 &lt;Directory "/home/dxxx/www"&gt;
 Options Indexes FollowSymLinks
 AllowOverride None
 Order allow,deny
 Allow from all
 &lt;/Directory&gt;
 ScriptAlias /py/ "/home/dxxxx/www/py/"
 WSGIScriptAlias /wsgiprog /home/dxxxx/www/wsgiprog/Form/Start.wsgi
&lt;/VirtualHost&gt;

&lt;VirtualHost *:80&gt;
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName sxxxx.com 
 ServerAlias www.sxxxx.com
 ProxyPass / http://localhost:6800/
 ProxyPassReverse / http://localhost:6800/
&lt;/VirtualHost&gt;
</code></pre>

blocks|key|242743|text|我的apache监听2个不同的端口，|type|unstyled|depth|inlineStyleRanges|entityRanges|data|242744|Listen+8080
Listen+80++|code-block|syntax|javascript|242745|我使用80，当我想要一个透明的URL，而不是把端口放在URL后，对谷歌服务有用，不允许本地url？|242746|但是我使用8080进行内部开发，其中我使用端口作为“开发环境”的参考。|242747|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

My apache listens to 2 different ports, 

<pre><code>Listen 8080
Listen 80 
</code></pre>

I use the 80 when i want a transparent URL and do not put the port after the URL
useful for google services that wont allow local url? 

But i use the 8080 for internal developing where i use the port as a reference for a "dev environment"

blocks|key|247552|text|这也适用于ISPConfig。在网站列表get+inside+a+domain中，单击Options选项卡，添加以下行：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|247553|ProxyPass+/+http://localhost:8181/
ProxyPassReverse+/+http://localhost:8181/|code-block|syntax|javascript|247554|然后转到网站和wolaa+:)这也是工作的HTTPS协议。|247555|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

This is working in ISPConfig too. In website list get inside a domain, click to Options tab, add these lines: ;

<pre><code>ProxyPass / http://localhost:8181/
ProxyPassReverse / http://localhost:8181/
</code></pre>

Then go to website and wolaa :) This is working HTTPS protocol too.

blocks|key|3133584|text|试试这个-|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3133585|<VirtualHost+*:80>+
++ProxyPreserveHost+On
++ProxyRequests+Off
++ServerName+www.adminbackend.example.com
++ServerAlias+adminbackend.example.com
++ProxyPass+/+http://localhost:6000/
++ProxyPassReverse+/+http://localhost:6000/
++ErrorLog+${APACHE_LOG_DIR}/error.log
++CustomLog+${APACHE_LOG_DIR}/access.log+combined
</VirtualHost>+|code-block|syntax|javascript|3133586|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Try this one- 

<pre><code>&lt;VirtualHost *:80&gt; 
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName www.adminbackend.example.com
 ServerAlias adminbackend.example.com
 ProxyPass / http://localhost:6000/
 ProxyPassReverse / http://localhost:6000/
 ErrorLog ${APACHE_LOG_DIR}/error.log
 CustomLog ${APACHE_LOG_DIR}/access.log combined
&lt;/VirtualHost&gt; 
</code></pre>

I've struggled with this for some time and am definitely doing something wrong. 

I have apache server and a JBoss server on the same machine. I'd like to redirect traffic for mydomain.com to JBoss localhost:8080/example. The DNS is currently setup for mydomain.com and it will go straight to port 80 when entered into the browser. 

My question is how do I redirect to a different port when a certain domain name comes to apache (in this case, "mydomain.com")?

<pre><code>&lt;VirtualHost ip.addr.is.here&gt; 
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName mydomain.com
 ProxyPass http://mydomain.com http://localhost:8080/example
 ProxyPassReverse http://mydomain.com http://localhost:8080/example
&lt;/VirtualHost&gt; 
</code></pre>

UPDATED w/ Suggestions
- Still not forwarding to port 8080

<pre><code>&lt;VirtualHost *:80&gt; 
 ProxyPreserveHost On
 ProxyRequests Off
 ServerName mydomain.com
 ServerAlias www.mydomain.com
 ProxyPass http://mydomain.com http://localhost:8080/example
 ProxyPassReverse http://mydomain.com http://localhost:8080/example
&lt;/VirtualHost&gt; 
</code></pre>

Apache redirect to another port

我在这个问题上挣扎了一段时间，肯定是做错了什么。我在同一台机器上有一个apache服务器和一个JBoss服务器。我想将mydomain.com的流量重定向到example本地主机:8080/ JBoss。域名系统当前设置为mydomain.com，当进入浏览器时，它将直接转到端口80。我的问题是，当某个域名进入apac...

问Apache重定向到另一个端口
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Apache重定向到另一个端口EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Apache重定向到另一个端口
EN