blocks|key|1362569|text|如果您使用多个条件，并且想要计算特定列中非空单元格的数量，则可能需要查看DCOUNTA。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1362570|e.g|1362571|++A+++B+++C+++D++E+++F+++G
1+Dog+Cat+Cow++++Dog+Cat
2+x+++1++++++++++x+++1
3+x+++2+
4+x+++1+++nb+++++Result:
5+x+++2+++nb+++++1|code-block|syntax|javascript|1362572|E5中的公式：=DCOUNTA(A1:C5，"Cow"，E1:F2)|1362573|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

If you are using multiple criteria, and want to count the number of non-blank cells in a particular column, you probably want to look at DCOUNTA.

e.g

<pre><code> A B C D E F G
1 Dog Cat Cow Dog Cat
2 x 1 x 1
3 x 2 
4 x 1 nb Result:
5 x 2 nb 1
</code></pre>

Formula in E5:
=DCOUNTA(A1:C5,"Cow",E1:F2)

blocks|key|1577868|text|如果多个条件使用countifs|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1577869|=countifs(A1:A10,">""",B1:B10,">""")|code-block|syntax|javascript|1577870|"++>""+++"查看的是大于为空的。此公式查找两个条件，并且同一行上的任何一列都不能为空，以便进行计数。如果只计算一列，则使用一个条件(即，使用B1:B10之前的所有内容，不包括逗号)|offset|length|style|CODE|1577871|entityMap^0|0|0|0|A|22|6|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]|$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

If multiple criteria use countifs

<pre><code>=countifs(A1:A10,"&gt;""",B1:B10,"&gt;""")
</code></pre>

The <code>" &gt;"" "</code> looks at the greater than being empty. This formula looks for two criteria and neither column can be empty on the same row for it to count. If just counting one column do this with the one criteria (i.e. Use everything before <code>B1:B10</code> not including the comma)

blocks|key|1362742|text|我发现的最好的方法是使用"IF“和"ISERROR”语句的组合：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1362743|=IF(ISERROR(COUNTIF(E5:E356,1)),"---",COUNTIF(E5:E356,1)|code-block|syntax|javascript|1362744|如果存在错误(如果单元格中没有要计数/平均值/等的数据)，此公式将使用三个短划线(-)填充单元格，或者使用计数(如果单元格中有数据)填充单元格|1362745|这个逻辑查询的好处是，它将通过将文本值设置为“-”来排除完全空白的行/列，因此如果您有一个行计数(或平均)，然后在公式中的另一个点对其进行计数(或平均)，则第二个公式不会响应错误，因为它将忽略“-”单元格。|1362746|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

The best way I've found is to use a combination "IF" and "ISERROR" statement:

<pre><code>=IF(ISERROR(COUNTIF(E5:E356,1)),"---",COUNTIF(E5:E356,1)
</code></pre>

This formula will either fill the cell with three dashes (---) if there would be an error (if there is no data in the cells to count/average/etc), or with the count (if there was data in the cells)

The nice part about this logical query is that it will exclude entirely blank rows/columns by making them textual values of "---", so if you have a row counting (or averaging), which was then counted (or averaged) in another spot in your formula, the second formula won't respond with an error because it will ignore the "---" cell.

blocks|key|1362763|text|您可以尝试这样做：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1362764|=COUNTIF(Data!A2:A300,"<>"&"")|code-block|syntax|javascript|1362765|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You can try this : 

<pre><code>=COUNTIF(Data!A2:A300,"&lt;&gt;"&amp;"")
</code></pre>

blocks|key|1578174|text|我发现最好的方法是使用SUMPRODUCT：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1578175|=SUMPRODUCT((A1:A10<>"")*1)|code-block|syntax|javascript|1578176|如果你想加入更多的标准，这也是非常好的：|1578177|=SUMPRODUCT((A1:A10<>"")*(A1:A10>$B$1)*(A1:A10<=$B$2))|1578178|entityMap^0|B|A|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|T|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|O|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|P|$]]

I find that the best way to do this is to use <code>SUMPRODUCT</code> instead:

<pre><code>=SUMPRODUCT((A1:A10&lt;&gt;"")*1)
</code></pre>

It's also pretty great if you want to throw in more criteria:

<pre><code>=SUMPRODUCT((A1:A10&lt;&gt;"")*(A1:A10&gt;$B$1)*(A1:A10&lt;=$B$2))
</code></pre>

How do I get <code>countifs</code> to select all non-blank cells?
I have two other criteria, so using <code>counta</code> alone is not an option.

Using <code>istext</code> makes the result give 0, always.
Excel gives an error when using <code>&lt;&gt;""</code> as a criterion.

How do I get countifs to select all non-blank cells in Excel?

如何让countifs选择所有非空单元格？我还有另外两个条件，所以不能单独使用counta。使用istext会使结果始终为0。使用<>""作为条件时，Excel会显示错误。

问如何让countifs选中Excel中的所有非空单元格？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何让countifs选中Excel中的所有非空单元格？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何让countifs选中Excel中的所有非空单元格？
EN