blocks|key|183138|text|在创建安全角色和用户之前，这确实对我有效，但是当我尝试运行我的网站时，收到以下消息HTTP+Error+403.14+-+Forbidden|type|unstyled|depth|inlineStyleRanges|entityRanges|data|183139|Web服务器配置为不列出此目录的内容。最可能的原因是：·没有为请求的URL配置默认文档，并且服务器上没有启用目录浏览。|183140|您可以尝试的内容：·如果您不想启用目录浏览，请确保配置了默认文档并且文件存在。·启用目录浏览。1.转到IIS+Express安装目录。2.运行appcmd+set+config+/section:system.webServer/directoryBrowse+/enabled:true以在服务器级别启用目录浏览。3.运行appcmd+set+config+"SITE_NAME“/section:system.webServer/directoryBrowse+/enabled:true以在站点级别启用目录浏览。|183141|·验证站点或应用程序配置文件中的configuration/system.webServer/directoryBrowse@enabled属性是否设置为true。|183142|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

This did work for me till creating a security role and then a user but then when I try to run my website get the following message 
HTTP Error 403.14 - Forbidden

The Web server is configured to not list the contents of this directory.
Most likely causes:
•A default document is not configured for the requested URL, and directory browsing is not enabled on the server.

Things you can try:
•If you do not want to enable directory browsing, ensure that a default document is configured and that the file exists.
• Enable directory browsing. 1.Go to the IIS Express install directory.
2.Run appcmd set config /section:system.webServer/directoryBrowse /enabled:true to enable directory browsing at the server level.
3.Run appcmd set config ["SITE_NAME"] /section:system.webServer/directoryBrowse /enabled:true to enable directory browsing at the site level.

•Verify that the configuration/system.webServer/directoryBrowse@enabled attribute is set to true in the site or application configuration file.

blocks|key|183232|text|我从here下载了一个开源的实用工具，叫做“WCF的凭证管理器”。它需要以下配置才能工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|183233|对于配置，您需要编辑工程CredentialServiceHost的配置文件，如下所示：|183234|++++*<?xml+version="1.0"?>
<configuration>
++++<connectionStrings>
++++<clear+/>
++++++++<add+name="AspNetDbConnectionString"+connectionString="[Your+data+base+connection+string]"+providerName="System.Data.SqlClient"/>
++++<add+name="LocalSqlServer"+connectionString="[Your+data+base+connection+string]"+providerName="System.Data.SqlClient"/>


++</connectionStrings>
++++<system.web>
++++++++<authentication+mode="None"/>
++<roleManager+enabled="true"/>
++++</system.web>
++++<system.serviceModel>
++++++++<services>
++++++++++++<service+name="AspNetSqlProviderService"+behaviorConfiguration="MEX+Enabled">
++++++++++++++++<endpoint+address=""+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IApplicationManager"/>
++++++++++++++++<endpoint+address=""+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IMembershipManager"/>
++++++++++++++++<endpoint+address=""+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IPasswordManager"/>
++++++++++++++++<endpoint+address=""+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IRoleManager"/>
++++++++++++++++<endpoint+address=""+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IUserManager"/>
++++++++++++</service>
++++++++</services>
++++++++<bindings>
++++++++++++<wsHttpBinding>
++++++++++++++++<binding+name="TransactionalWS"+transactionFlow="true">
++++++++++++++++++++<reliableSession+enabled="True"/>
++++++++++++++++</binding>
++++++++++++</wsHttpBinding>
++++++++</bindings>
++++++<behaviors>
+++++++++<serviceBehaviors>
++++++++++++<behavior+name="MEX+Enabled">
+++++++++++++++<serviceMetadata+httpGetEnabled="true"/>
++++++++++++</behavior>
+++++++++</serviceBehaviors>
++++++</behaviors>
++++</system.serviceModel>
<startup><supportedRuntime+version="v4.0"+sku=".NETFramework,Version=v4.0"/></startup></configuration>|code-block|syntax|javascript|183235|对于"CredentialsManager“项目，您应该使用以下配置：|183236|<?xml+version="1.0"?>
<configuration>
+++<configSections>
++++++<sectionGroup+name="applicationSettings"+type="System.Configuration.ApplicationSettingsGroup,+System,+Version=2.0.0.0,+Culture=neutral,+PublicKeyToken=b77a5c561934e089">
+++++++++<section+name="CredentialsManagerClient.Properties.Settings"+type="System.Configuration.ClientSettingsSection,+System,+Version=2.0.0.0,+Culture=neutral,+PublicKeyToken=b77a5c561934e089"+requirePermission="false"/>
++++++</sectionGroup>
+++</configSections>
+++<applicationSettings>
++++++<CredentialsManagerClient.Properties.Settings>
+++++++++<setting+name="AspNetSqlProviderService"+serializeAs="String">
++++++++++++<value>http://localhost:8000</value>
+++++++++</setting>
++++++</CredentialsManagerClient.Properties.Settings>
+++</applicationSettings>
+++<system.serviceModel>
++++++<client>
+++++++++<endpoint+address="http://localhost:8000/"+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IApplicationManager"/>
+++++++++<endpoint+address="http://localhost:8000/"+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IMembershipManager"/>
+++++++++<endpoint+address="http://localhost:8000/"+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IPasswordManager"/>
+++++++++<endpoint+address="http://localhost:8000/"+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IRoleManager"/>
+++++++++<endpoint+address="http://localhost:8000/"+binding="wsHttpBinding"+bindingConfiguration="TransactionalWS"+contract="IUserManager"/>
++++++</client>
++++++<bindings>
+++++++++<wsHttpBinding>
++++++++++++<binding+name="TransactionalWS"+transactionFlow="true">
+++++++++++++++<reliableSession+enabled="True"/>
++++++++++++</binding>
+++++++++</wsHttpBinding>
++++++</bindings>
+++</system.serviceModel>
<startup><supportedRuntime+version="v4.0"+sku=".NETFramework,Version=v4.0"/></startup></configuration>|183237|以管理员身份运行"CredentialsServiceHost.exe“文件，然后运行"CredentialsManager.exe”文件。|183238|entityMap|0|LINK|mutability|MUTABLE|url|http://www.idesign.net/Downloads/GetDownload/1909^0|2|4|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@$A|Z|B|10|1|11]]|C|$]]|$1|D|3|E|5|6|7|12|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|13|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|14|8|@]|9|@]|C|$]]|$1|M|3|N|5|H|7|15|8|@]|9|@]|C|$I|J]]|$1|O|3|P|5|6|7|16|8|@]|9|@]|C|$]]|$1|Q|3|-4|5|6|7|17|8|@]|9|@]|C|$]]]|R|$S|$5|T|U|V|C|$W|X]]]]

There is a open source utility named "Credentials Manager for WCF" which I downloaded from <a href="http://www.idesign.net/Downloads/GetDownload/1909" rel="nofollow">here</a>. It needs below configurations to work. 
 
For configurations, you should edit configuration file of project "CredentialServiceHost" as follows:

<pre><code> *&lt;?xml version="1.0"?&gt;
&lt;configuration&gt;
 &lt;connectionStrings&gt;
 &lt;clear /&gt;
 &lt;add name="AspNetDbConnectionString" connectionString="[Your data base connection string]" providerName="System.Data.SqlClient"/&gt;
 &lt;add name="LocalSqlServer" connectionString="[Your data base connection string]" providerName="System.Data.SqlClient"/&gt;


 &lt;/connectionStrings&gt;
 &lt;system.web&gt;
 &lt;authentication mode="None"/&gt;
 &lt;roleManager enabled="true"/&gt;
 &lt;/system.web&gt;
 &lt;system.serviceModel&gt;
 &lt;services&gt;
 &lt;service name="AspNetSqlProviderService" behaviorConfiguration="MEX Enabled"&gt;
 &lt;endpoint address="" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IApplicationManager"/&gt;
 &lt;endpoint address="" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IMembershipManager"/&gt;
 &lt;endpoint address="" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IPasswordManager"/&gt;
 &lt;endpoint address="" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IRoleManager"/&gt;
 &lt;endpoint address="" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IUserManager"/&gt;
 &lt;/service&gt;
 &lt;/services&gt;
 &lt;bindings&gt;
 &lt;wsHttpBinding&gt;
 &lt;binding name="TransactionalWS" transactionFlow="true"&gt;
 &lt;reliableSession enabled="True"/&gt;
 &lt;/binding&gt;
 &lt;/wsHttpBinding&gt;
 &lt;/bindings&gt;
 &lt;behaviors&gt;
 &lt;serviceBehaviors&gt;
 &lt;behavior name="MEX Enabled"&gt;
 &lt;serviceMetadata httpGetEnabled="true"/&gt;
 &lt;/behavior&gt;
 &lt;/serviceBehaviors&gt;
 &lt;/behaviors&gt;
 &lt;/system.serviceModel&gt;
&lt;startup&gt;&lt;supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/&gt;&lt;/startup&gt;&lt;/configuration&gt;
</code></pre>

and for project "CredentialsManager" you should use following configuration:

<pre><code>&lt;?xml version="1.0"?&gt;
&lt;configuration&gt;
 &lt;configSections&gt;
 &lt;sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"&gt;
 &lt;section name="CredentialsManagerClient.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false"/&gt;
 &lt;/sectionGroup&gt;
 &lt;/configSections&gt;
 &lt;applicationSettings&gt;
 &lt;CredentialsManagerClient.Properties.Settings&gt;
 &lt;setting name="AspNetSqlProviderService" serializeAs="String"&gt;
 &lt;value&gt;http://localhost:8000&lt;/value&gt;
 &lt;/setting&gt;
 &lt;/CredentialsManagerClient.Properties.Settings&gt;
 &lt;/applicationSettings&gt;
 &lt;system.serviceModel&gt;
 &lt;client&gt;
 &lt;endpoint address="http://localhost:8000/" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IApplicationManager"/&gt;
 &lt;endpoint address="http://localhost:8000/" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IMembershipManager"/&gt;
 &lt;endpoint address="http://localhost:8000/" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IPasswordManager"/&gt;
 &lt;endpoint address="http://localhost:8000/" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IRoleManager"/&gt;
 &lt;endpoint address="http://localhost:8000/" binding="wsHttpBinding" bindingConfiguration="TransactionalWS" contract="IUserManager"/&gt;
 &lt;/client&gt;
 &lt;bindings&gt;
 &lt;wsHttpBinding&gt;
 &lt;binding name="TransactionalWS" transactionFlow="true"&gt;
 &lt;reliableSession enabled="True"/&gt;
 &lt;/binding&gt;
 &lt;/wsHttpBinding&gt;
 &lt;/bindings&gt;
 &lt;/system.serviceModel&gt;
&lt;startup&gt;&lt;supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/&gt;&lt;/startup&gt;&lt;/configuration&gt;
</code></pre>

Run the "CredentialsServiceHost.exe" file as an administrator then run the "CredentialsManager.exe" file.

I'm using Visual Studio 2013 and as you probably know there is no ASP.NET Web Configuration Tool. I wanted as always make fast roles etc. I tried enable it using this article: <a href="http://blogs.msdn.com/b/webdev/archive/2013/08/19/asp-net-web-configuration-tool-missing-in-visual-studio-2013.aspx?PageIndex=2#comments">http://blogs.msdn.com/b/webdev/archive/2013/08/19/asp-net-web-configuration-tool-missing-in-visual-studio-2013.aspx?PageIndex=2#comments</a> . But I'm getting "Invalid application path" error. Any solutions to this error or workarounds?

Visual Studio 2013 and ASP.NET Web Configuration Tool

我使用的是Visual Studio2013，你可能知道这里没有ASP.NET网络配置工具。我想一如既往地创建快速角色等。我试着使用这篇文章来实现它：。但是我得到了“无效的应用程序路径”错误。对此错误有什么解决方案或变通方法吗？

问Visual Studio 2013和ASP.NET网站配置工具
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Visual Studio 2013和ASP.NET网站配置工具EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Visual Studio 2013和ASP.NET网站配置工具
EN