blocks|key|1044608|text|你不需要在控制器中做‘包含HTTParty’。只要去掉它，它就应该可以工作了。我只是测试了一下，它对我来说很有效。如果这对您不起作用，您应该将gem添加到您的环境中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1044609|通常，如果您在Rails应用程序中使用gem，则应将以下内容添加到environment.rb：|1044610|config.gem+"httparty"|code-block|syntax|javascript|1044611|gem现在可以在应用程序中使用了，您不需要在Controller中添加'require‘。此外，您不需要在控制器中使用RubyGems。|1044612|使用Rails3时，需要在Gemfile中放入以下内容：|1044613|gem+"httparty"|1044614|我希望它能为你工作。:)|1044615|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|V|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|F|7|X|8|@]|9|@]|A|$G|H]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

You don't need to do 'include HTTParty' inside the Controller. Just remove that and it should work. I just tested it and it worked for me. If this doesn't work for you, you should add the gem to your environment.

Usually if you use a gem inside your Rails application, you should add the following to environment.rb:

<pre><code>config.gem "httparty"
</code></pre>

The gem will be available in the application now and you don't need to add 'require' inside the Controller. Also, you don't need to require RubyGems inside a Controller. 

When you use Rails 3, you need to put the following inside the Gemfile:

<pre><code>gem "httparty"
</code></pre>

I hope it works for you. :)

blocks|key|1044668|text|遇到了同样的问题。然后我从Ruby+1.8.7切换到Ruby+1.9.2，所有的错误都消失得无影无踪。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1044669|(是的，我首先花了相当多的时间才想到Ruby版本可能是问题所在。为了避免可能与2个ruby版本发生冲突，我配置了一个secundairy服务器，经过几个小时后，我的RoR堆栈开始运行。并且使用httparty的第一个测试(基于上面的示例)开箱即用！终于可以再次休眠RESTfully了:-)|1044670|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Ran into the same problem. Then I switched from Ruby 1.8.7 to Ruby 1.9.2 and all errors varnished into thin air. 

(Yes, it first took me quite some hours to come up with the possibility that the Ruby version might be the problem. Configured a secundairy server to avoid possible conflicts with 2 ruby versions, and after way to many hours I got my RoR stack up and running. And the first test with httparty (based on the example on top) worked out of the box! Finally can sleep RESTfully again :-)

blocks|key|829816|text|问题是，如果您加载一个新的gem，即使您正在开发，也必须重新启动服务器。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|829817|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The problem is, if you load a new gem, you have to restart the server even if you are in development.

blocks|key|829853|text|我也犯了同样的错误。我试着到处移动require+HTTParty，但我发现，我所需要做的就是重新启动rails+server，最后我既不需要‘需要HTTParty’也不需要‘包含’它。它只需要加载到rails中即可。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|829854|entityMap^0|H|G|1F|C|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

I had this same error. I tried moving the <code>require HTTParty</code> all over, but found, all I needed to do was restart the <code>rails server</code> In the end I did not need to 'require HTTParty' nor 'include' it. It just needed to be loaded into rails.

blocks|key|1044784|text|1)将httpary包含在您的gemfile中|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1044785|打开gem文件，然后添加|1044786|+gem+'httparty','YOUR+VERSION+NUMBER'|code-block|syntax|javascript|1044787|2)在app文件的命令提示符下运行bundle+install|offset|length|style|CODE|1044788|3)重启服务器|1044789|entityMap^0|0|0|0|H|E|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|V|8|@$K|W|L|X|M|N]]|9|@]|A|$]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

1)include the httpary in your gemfile

open your gem file then add 

<pre><code> gem 'httparty','YOUR VERSION NUMBER'
</code></pre>

2) run <code>bundle install</code> in your command prompt of the app file 

3) restart the server

blocks|key|829918|text|我在审查一个学生的项目时遇到了同样的错误，我将Gem的名称从大写改为小写，然后运行bundle+install。然后，我继续将它们从require+'HTTParty'导入到require+'httparty'的格式进行了更改，然后就成功了|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|829919|entityMap^0|1U|I|2F|I|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

I run into the same error whilst reviewing a project from a student, I change the name of the Gem from uppercase to lowercase then run bundle install. I then went ahead to change the format in which they were being imported from 
<code>require 'HTTParty'</code> to <code>require 'httparty'</code> and boom it worked

I've been trying to use HTTParty in my rails code

<pre><code>sudo gem install httparty
</code></pre>

From the command line I can now successfully do

<pre><code>httparty "http://twitter.com/statuses/public_timeline.json"
</code></pre>

When I try this in my rails app

<pre><code>require 'rubygems'
require 'httparty'

class FooController &lt; ApplicationController
 include HTTParty

 def bar
 blah = HTTParty.get("http://twitter.com/statuses/public_timeline.json")
 end
end
</code></pre>

I get the error message "no such file to load -- httparty"

I suspect there is something wrong with my environment?

Trouble including httparty in ruby on rails

我一直在尝试在rails代码中使用HTTPartysudo gem install httparty通过命令行，我现在可以成功地执行以下操作httparty "http://twitter.com/statuses/public_timeline.json"当我在我的rails应用程序中尝试时require 'ruby...

问在ruby on rails中包含httparty的问题
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在ruby on rails中包含httparty的问题EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在ruby on rails中包含httparty的问题
EN