blocks|key|2938811|text|您需要首先使用create+Laravel+project，如果您已经有一个项目目录，则需要在终端中使用cd命令转到此项目目录，例如cd+myproject。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2938812|2938813|entityMap|0|LINK|mutability|MUTABLE|url|http://laravel.com/docs/4.2/installation^0|1G|2|1U|C|7|M|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]|$9|R|A|S|B|C]]|D|@$9|T|A|U|1|V]]|E|$]]|$1|F|3|-4|5|6|7|W|8|@]|D|@]|E|$]]|$1|G|3|-4|5|6|7|X|8|@]|D|@]|E|$]]]|H|$I|$5|J|K|L|E|$M|N]]]]

You need to first <a href="http://laravel.com/docs/4.2/installation">create Laravel project</a> and if you already have one you need to go to this project dir using <code>cd</code> command in terminal for example <code>cd myproject</code>. 

Now you will be able to run any artisan commands, for example running <code>php artisan</code> will display you list of available commands.

blocks|key|2938874|text|如果不在laravel项目文件夹中，则不能使用php+artisan。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2938875|这就是为什么上面写着'Could+not+open+input+file+-+artisan'。|2938876|entityMap^0|4|7|N|B|0|A|11|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

You cannot use <code>php artisan</code> if you are not inside a <code>laravel</code> project folder. 

That is why it says <code>'Could not open input file - artisan'</code>.

blocks|key|2938883|text|如果您的项目位于/home/forge/laravel-project/|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2938884|你可以像这样正确地执行你的工匠|2938885|php+/home/forge/laravel-project/artisan+...|2938886|entityMap^0|8|S|0|0|0|17|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|P|8|@$9|Q|A|R|B|C]]|D|@]|E|$]]|$1|J|3|-4|5|6|7|S|8|@]|D|@]|E|$]]]|K|$]]

If you project is at <code>/home/forge/laravel-project/</code>

You can properly execute your artisan like this 

<code>php /home/forge/laravel-project/artisan ...</code>

blocks|key|2939120|text|很可能你没有在正确的目录中！|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2939121|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Most probably you are not in the right directory!

blocks|key|2726467|text|我只需要让artisan成为可执行文件。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2726468|chmod+%2Bx+artisan|2726469|没有...and前缀，它就可以工作了。|2726470|entityMap^0|5|7|0|0|G|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|R|8|@]|D|@]|E|$]]|$1|J|3|-4|5|6|7|S|8|@]|D|@]|E|$]]]|K|$]]

I just needed to make <code>artisan</code> executable.

<code>chmod +x artisan</code> 

...and it works without the php prefix then.

blocks|key|147240|text|首先，确保在laravel项目文件夹中，否则终端将无法在项目目录中找到artisan文件，并且您随后启动服务器的任何请求都将被拒绝。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|147241|演示|147242|假设我们的laravel项目名称是blog，位于C:\laravel中，然后我们拥有：C:\laravel\blog|147243|在哪里打开终端|147244|导航到C:\laravel\blog目录并打开命令窗口(终端)。输入以下代码：|BOLD|147245|启动服务器的Laravel终端代码|147246|php+artisan+serve+--host+127.0.0.1|147247|entityMap^0|Z|7|0|0|H|4|O|A|17|F|0|0|3|F|3|F|0|0|0|Y|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|Y|8|@$9|Z|A|10|B|C]|$9|11|A|12|B|C]|$9|13|A|14|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|15|8|@]|D|@]|E|$]]|$1|L|3|M|5|6|7|16|8|@$9|17|A|18|B|N]|$9|19|A|1A|B|C]]|D|@]|E|$]]|$1|O|3|P|5|6|7|1B|8|@]|D|@]|E|$]]|$1|Q|3|R|5|6|7|1C|8|@$9|1D|A|1E|B|C]]|D|@]|E|$]]|$1|S|3|-4|5|6|7|1F|8|@]|D|@]|E|$]]]|T|$]]

First, be sure to be in the laravel project folder or else the terminal won't be able to locate the <code>artisan</code> file in the project directory and any subsequent request you pulled to start a server would be rejected.

<h1>Demo</h1>

Let's say our laravel project name is <code>blog</code> and located in <code>C:\laravel</code>
We then have: <code>C:\laravel\blog</code>

<h1>Where to open terminal</h1>

Navigate to the <code>C:\laravel\blog</code> directory and open the command window (terminal). Input the code below:

<h1>Laravel terminal code to start server</h1>

<code>php artisan serve --host 127.0.0.1</code>

blocks|key|150050|text|确保当前目录是您的项目名称|type|unstyled|depth|inlineStyleRanges|entityRanges|data|150051|例如，项目名称为demo，位置为f:/demo|150052|f:demo>+php+artisan+serve|code-block|syntax|javascript|150053|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

<h1>Make Sure your current directory is your project-name</h1>
for example your project name is demo and location is f:/demo
<pre><code>f:demo&gt; php artisan serve
</code></pre>

blocks|key|2938844|text|我签出了一个现有的Laravel项目，该项目没有此脚本。即使是find+/+-name+'artisan'也没有产生任何结果。解决方案被证明是简单的，虽然有点奇怪：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2938845|curl+-L+'https://raw.githubusercontent.com/laravel/laravel/v4.2.11/artisan'+>+artisan|code-block|syntax|javascript|2938846|您可能希望选择一个与您安装的Laravel版本相匹配的标记版本。|2938847|entityMap^0|V|M|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|R|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|S|8|@]|D|@]|E|$]]|$1|M|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|N|$]]

I checked out an existing Laravel project, which did not have this script. Even a <code>find / -name 'artisan'</code> produced no results. The solution turned out to be simple, if a bit weird:

<pre><code>curl -L 'https://raw.githubusercontent.com/laravel/laravel/v4.2.11/artisan' &gt; artisan
</code></pre>

You probably want to choose a tagged version that matches your installed version of Laravel.

blocks|key|2726701|text|如果这是您第一次安装laravel，那么在laravel目录中创建另一个目录/文件夹，然后移动到那个空文件夹，并使用以下命令创建另一个项目：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2726702|composer+create-project+--prefer-dist+laravel/laravel+blog|code-block|syntax|javascript|2726703|2726704|php+artisan+serve|2726705|您将收到如下返回值：|2726706|laravel+deployment+server+started:+http://localhost:8000|2726707|请参阅所附图片|2726708|📷|atomic|offset|length|2726709|​|2726710|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/b0a4321cbf7b05b7e12af60a6ffd29d0.png|imageAlt^0|0|0|0|0|0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|15|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|16|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|17|8|@]|9|@]|A|$]]|$1|H|3|I|5|D|7|18|8|@]|9|@]|A|$E|F]]|$1|J|3|K|5|6|7|19|8|@]|9|@]|A|$]]|$1|L|3|M|5|D|7|1A|8|@]|9|@]|A|$E|F]]|$1|N|3|O|5|6|7|1B|8|@]|9|@]|A|$]]|$1|P|3|Q|5|R|7|1C|8|@]|9|@$S|1D|T|1E|1|1F]]|A|$]]|$1|U|3|V|5|6|7|1G|8|@]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1H|8|@]|9|@]|A|$]]]|X|$Y|$5|Z|10|11|A|$12|13|14|-4]]]]

If it is your first install of laravel then create another directory/folder inside the laravel directory and then move to that empty folder and create another project using the command below:

<pre><code>composer create-project --prefer-dist laravel/laravel blog
</code></pre>

This will create a new project named "blog", then go back to parent laravel directory and now you can run this command:

<pre><code>php artisan serve
</code></pre>

You will receive the return such as: 

<pre><code>laravel deployment server started: http://localhost:8000
</code></pre>

See attached image
<a href="https://i.stack.imgur.com/EwVaf.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/EwVaf.png" alt="enter image description here"></a>

blocks|key|149889|text|在努力解决这个问题之后，我发现您需要通过运行sudo+find+/+-name+artisan并从那里运行命令php+artisan+....来查找artisan所在的位置|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|149890|entityMap^0|M|P|1J|G|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

After struggling with this issue, I found out that you need to find where artisan resides by running <code>sudo find / -name artisan</code>,
and from there run the command <code>php artisan ....</code>

blocks|key|2939147|text|首先，通过以下链接创建项目，以创建larave+7项目：Create+Project|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2939148|现在，您需要使用以下命令进入项目文件夹：|2939149|cd+myproject|code-block|syntax|javascript|2939150|现在尝试运行artisan命令，例如php+artisan。|style|CODE|2939151|或者，如果你没有安装compose，也可能会发生这种情况。因此，如果您没有安装composer，请运行composer+install并重试artisan命令。|2939152|entityMap|0|LINK|mutability|MUTABLE|url|https://laravel.com/docs/7.x/installation^0|S|E|0|0|0|0|6|7|I|B|0|1F|G|1Y|7|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@$A|Z|B|10|1|11]]|C|$]]|$1|D|3|E|5|6|7|12|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|13|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|14|8|@$A|15|B|16|M|N]|$A|17|B|18|M|N]]|9|@]|C|$]]|$1|O|3|P|5|6|7|19|8|@$A|1A|B|1B|M|N]|$A|1C|B|1D|M|N]]|9|@]|C|$]]|$1|Q|3|-4|5|6|7|1E|8|@]|9|@]|C|$]]]|R|$S|$5|T|U|V|C|$W|X]]]]

First create the project from the following link to create larave 7 project: <a href="https://laravel.com/docs/7.x/installation" rel="nofollow noreferrer">Create Project</a> 

Now you need to enter your project folder using the following command: 

<pre><code>cd myproject
</code></pre>

Now try to run <code>artisan</code> command, such as, <code>php artisan</code>.

Or it may happen if you didn't install compose. So if you didn't install composer then run <code>composer install</code> and try again <code>artisan</code> command.

blocks|key|149771|text|如果您正在Vagrant中运行您的Laravel项目，并且刚刚通过SSH进入虚拟机，那么在尝试运行artisan命令之前，不要忘记使用cd+/vagrant！|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|149772|entityMap^0|1V|B|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

If you're running your Laravel project in Vagrant and have just SSH-ed into the virtual machine, don't forget to <code>cd /vagrant</code> before you try running artisan commands!

blocks|key|2939128|text|出现此错误的原因是您没有在项目中安装composer。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2939129|在项目路径中运行composer+install命令。|offset|length|style|CODE|2939130|entityMap^0|0|8|G|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

This error happens because you didn't install composer on your project.

run <code>composer install</code> command in your project path.

blocks|key|2726780|text|安装composer后，您需要创建工程：|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2726781|composer+create-project+laravel/laravel+/path/to/tour/project|code-block|syntax|javascript|2726782|你可以看到documentation，对于你的php版本，你能安装的最新的Laravel是5.0。|2726783|现在days+here是最新的版本，需要>+php7.0。这是documentation。|2726784|entityMap|0|LINK|mutability|MUTABLE|url|https://getcomposer.org/|1|https://laravel.com/docs/5.0/installation|2|https://laravel.com/docs/5.7/installation^0|2|8|0|0|0|5|D|1|0|V|D|2|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@$A|Z|B|10|1|11]]|C|$]]|$1|D|3|E|5|F|7|12|8|@]|9|@]|C|$G|H]]|$1|I|3|J|5|6|7|13|8|@]|9|@$A|14|B|15|1|16]]|C|$]]|$1|K|3|L|5|6|7|17|8|@]|9|@$A|18|B|19|1|1A]]|C|$]]|$1|M|3|-4|5|6|7|1B|8|@]|9|@]|C|$]]]|N|$O|$5|P|Q|R|C|$S|T]]|U|$5|P|Q|R|C|$S|V]]|W|$5|P|Q|R|C|$S|X]]]]

After installing <a href="https://getcomposer.org/" rel="nofollow noreferrer">composer</a>, you need to create the project:

<pre><code>composer create-project laravel/laravel /path/to/tour/project
</code></pre>

You can see the <a href="https://laravel.com/docs/5.0/installation" rel="nofollow noreferrer">documentation</a>, for your php version the lastest Laravel you can install is 5.0.

Now days here is the lastest version and require > php7.0. Here is the <a href="https://laravel.com/docs/5.7/installation" rel="nofollow noreferrer">documentation</a>.

blocks|key|2939110|text|我的诀窍是从我的项目目录中执行cd+src，然后使用php+artisan命令执行和，因为我的artisan文件位于src文件夹中。下面是我的项目结构：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|BOLD|entityRanges|data|2939111|project
%7C__+config
%7C__+src
++++%7C__+app
++++%7C__+..
++++%7C__+artisan++//+hello+there!
++++%7C__+...
%7C__+...|code-block|syntax|javascript|2939112|entityMap^0|F|6|Q|B|1B|7|1M|3|15|1|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@$9|O|A|P|B|C]|$9|Q|A|R|B|C]|$9|S|A|T|B|C]|$9|U|A|V|B|C]|$9|W|A|X|B|D]]|E|@]|F|$]]|$1|G|3|H|5|I|7|Y|8|@]|E|@]|F|$J|K]]|$1|L|3|-4|5|6|7|Z|8|@]|E|@]|F|$]]]|M|$]]

What did the trick for me was to do <code>cd src</code> from my project directoy, and then use the <code>php artisan</code> command, since my <code>artisan</code> file was in the <code>src</code> folder. Here is my project structure:

<pre><code>project
|__ config
|__ src
 |__ app
 |__ ..
 |__ artisan // hello there!
 |__ ...
|__ ...
</code></pre>

blocks|key|2726866|text|例如，如果您在my-project/app/somefolder中，在终端cd+..中运行两次以进入my-project/文件夹|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2726867|entityMap^0|7|P|11|5|1E|B|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

if you re in say <code>my-project/app/somefolder</code> run in terminal <code>cd ..</code> two times to get in <code>my-project/</code> folder

blocks|key|2939181|text|您需要首先创建Laravel项目，如果您已经有一个项目，则需要在终端中使用cd命令转到此项目目录，例如cd+myproject。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2939182|示例:+C:\xampp+new\htdocs\project+laravel\LaravelProject>php+artisan+serve|2939183|现在，您将能够运行任何artisan命令，例如，运行php+artisan将显示可用命令列表。|2939184|​|2939185|📷|atomic|offset|length|2939186|2939187|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/41425b191318bac7038a4c9becd03a49.png|imageAlt^0|0|0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|Y|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|10|8|@]|9|@$K|11|L|12|1|13]]|A|$]]|$1|M|3|G|5|6|7|14|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|O|$P|$5|Q|R|S|A|$T|U|V|-4]]]]

You need to first create Laravel project and if you already have one you need to go to this project dir using cd command in terminal for example cd myproject.
Example : C:\xampp new\htdocs\project laravel\LaravelProject&gt;php artisan serve
Now you will be able to run any artisan commands, for example running php artisan will display you list of available commands.
<a href="https://i.stack.imgur.com/gwXgH.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/gwXgH.png" alt="enter image description here" /></a>

blocks|key|150006|text|另一件要注意的事情是，如果您有一个来自非公共位置的符号链接，也就是说，托管您的项目代码的public_html+-在符号链接位置(public_html)运行php+artisan将导致此错误。您似乎需要在实际的项目目录中才能让php+artisan工作。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|150007|entityMap^0|27|B|36|B|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

Another thing to note that if you have a symbolic link from a non public location which hosts your project code to say public_html - running <code>php artisan</code> in the symbolic link location (public_html) will result in this error.
You seem to need to be in the actual project directory for <code>php artisan</code> to work.

blocks|key|146010|text|我也有同样的问题。我也在laravel项目目录中。对我来说，只需更改artisan文件的权限即可。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146011|对于linux|146012|chmod+777+artisan|code-block|syntax|javascript|146013|对于windows|146014|146015|使用文件属性|unordered-list-item|146016|146017|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|T|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|U|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|V|8|@]|9|@]|A|$]]|$1|L|3|M|5|N|7|W|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|X|8|@]|9|@]|A|$]]|$1|P|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|Q|$]]

I have the same issue. I am also in the laravel project directory. what works for me is just change the permission of the artisan file.
For linux
<pre><code>chmod 777 artisan

</code></pre>
For windows
<ul>
<li>use the file property</li>
</ul>

blocks|key|2939353|text|特别针对那些在cPanel终端上有相同错误的人。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2939354|现在，您需要使用以下命令进入终端中的项目根目录或public_html文件夹：|2939355|cd+public_html|offset|length|style|BOLD|2939356|现在，您将能够运行任何artisan命令。|2939357|php+artisan配置:清除|2939358|​|2939359|📷|atomic|2939360|2939361|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/764cc0fe01bbb871dfb12af14d18e223.png|imageAlt^0|0|0|0|E|0|0|0|G|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|14|8|@$F|15|G|16|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|17|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|18|8|@$F|19|G|1A|H|I]]|9|@]|A|$]]|$1|N|3|O|5|6|7|1B|8|@]|9|@]|A|$]]|$1|P|3|Q|5|R|7|1C|8|@]|9|@$F|1D|G|1E|1|1F]]|A|$]]|$1|S|3|O|5|6|7|1G|8|@]|9|@]|A|$]]|$1|T|3|-4|5|6|7|1H|8|@]|9|@]|A|$]]]|U|$V|$5|W|X|Y|A|$Z|10|11|-4]]]]

For those people that are having the same error on cPanel terminal specifically.
Now you need to enter into your project root or public_html folder in the terminal using the following command:
cd public_html
Now you will be able to run any artisan commands.
php artisan config:clear
<a href="https://i.stack.imgur.com/K5SPl.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/K5SPl.png" alt="enter image description here" /></a>

When trying to create a new laravel project, The following error appears on the CLI:
<blockquote>
Could not open input file: artisan
Script php artisan clear-compiled handling the post-install-cmd event returned with an error
</blockquote>
I am using the latest version of XAMPP v3.2.1 with PHP 5.5.15 and with mcrypt enabled (made sure of that by issuing the command php -m). And I am running windows 8.1

Could not open input file: artisan

尝试创建新的laravel项目时，CLI上显示以下错误：无法打开输入文件: artisan脚本php artisan已清除编译处理返回错误的post-install-cmd事件我使用的是最新版本的XAMPP v3.2.1，带有PHP5.5.15，并且启用了mcrypt (通过发出命令PHP -m来确保这一点)。我使用的是windows 8.1。

问无法打开输入文件: artisan
EN

回答 20

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问无法打开输入文件: artisanEN

回答 20

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问无法打开输入文件: artisan
EN