blocks|key|250562|text|只需在选项卡栏中拖放选项卡图标即可。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|250563|即属于选项卡栏控制器的主选项卡栏。|250564|HTH|250565|::EDIT:：所以这似乎不起作用...我确定以前是这样的。|250566|无论如何，我找到的最简单的方法是删除选项卡，然后按您希望它们显示的顺序重新添加它们。|250567|希望这能有所帮助。|250568|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|P|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|Q|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|S|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|M|$]]

Just drag and drop the tab icons in the tab bar.

i.e. the main tab bar that belongs to the tab bar controller.

HTH

::EDIT:: So this doesn't seem to work... I'm sure it used to.

Anyway, the easiest way I found is to remove the tabs and add them back in the order you want them to show.

Hope this helps.

blocks|key|250617|text|在4.5中，在添加控制器后保存故事板，切换到另一个文件，然后返回到故事板，选项卡拖动应该会再次工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|250618|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

In 4.5 save the storyboard after adding a Controller, switch to another file and then back to the Storyboard and the tab dragging should work again.

blocks|key|250659|text|如果你以“源代码视图”打开故事板，然后关闭它，然后以IB视图打开它，它似乎修复了这个错误。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|250660|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you open the storyboard as 'source code view' and then close it an open it as IB view it seems to fix the bug..

blocks|key|467381|text|在xCode+4.6中也是如此。我本来是在beginning+storyboards+in+ios上学习教程，然后在TabBarController上切换项目，我不能改变顺序。我试图保存它-不起作用；然而，一旦我关闭并再次打开XCode+-它就起作用了。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|467382|entityMap|0|LINK|mutability|MUTABLE|url|http://www.raywenderlich.com/5138/beginning-storyboards-in-ios-5-part-1^0|L|S|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

Same thing is in xCode 4.6. I originally was following tutorial on <a href="http://www.raywenderlich.com/5138/beginning-storyboards-in-ios-5-part-1" rel="nofollow">beginning storyboards in ios</a>
At the point to swith the item on TabBarController, I could't change the order. I tried to save it - didn't work; however, Once I closed the XCode and open again - it DID WORK.

blocks|key|250743|text|我也在遵循故事板的raywenderlich教程，并意识到在添加选项卡控制器后，我不能通过拖动它来重新排列选项卡。很明显，这只是xcode中的一些bug。因此，只需退出xcode，重新启动它，这一次，您将能够拖动选项卡。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|250744|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I was following the raywenderlich tutorial for storyboards too and realised that after adding the tab controller i couldn't rearrange the tabs by dragging it. Well, apparently its just some bug in xcode. So just quit xcode, restart it and this time, you will be able to drag the tabs.

blocks|key|467491|text|你可以确保你的主故事板中的Tab+Controller+Dock选项被设置为"First+Responder"，这为我解决了这个问题！|type|unstyled|depth|inlineStyleRanges|entityRanges|data|467492|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

You can make sure that the Tab Controller Dock option in your Main storyboard is set to "First Responder", that solved it for me!

blocks|key|250843|text|在添加导航控制器后，我也遇到了同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|250844|修复:关闭故事板(Ctrl%2BCmd%2BW)，清理构建文件夹(Option%2BCmd%2BShift%2BK)和常规清理(Cmd%2BShift%2BK)。重新打开故事板，您将能够再次拖动项目。|250845|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had the same issue after adding a Navigation Controller.

Fix: close the storyboard (Ctrl+Cmd+W) and do a clean build folder (Option+Cmd+Shift+K) and a regular clean (Cmd+Shift+K). Reopen the storyboard and you'll be able to drag the items again.

blocks|key|467553|text|您可以通过拖放选项卡栏控制器中的图标来重新排列顺序|type|unstyled|depth|inlineStyleRanges|entityRanges|data|467554|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

You can just re-arrange the order by dragging and dropping the icons in the tab bar controller

blocks|key|250914|text|我正在使用XCode+5.1开发iOS+7.1，我发现下面的方法可以用来重新排列标签栏控制器中的标签。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|250915|要在选项卡栏控制器中重新排列选项卡，请将选项卡栏控制器中的序列删除到子视图控制器中。然后按所需的选项卡顺序重新绘制序列。要“重新绘制”，我的意思是你控制拖动从标签栏控制器到子视图控制器，并选择关系段(在列表底部)+=>视图控制器。|250916|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I'm using XCode 5.1 for development of iOS 7.1 and I found the following approach works for rearranging the tabs in a Tab Bar Controller.

To rearrange the tabs in a Tab Bar Controller, delete the segues from the Tab Bar Controller to your sub-view controllers. Then re-draw the segues in the order you want the tabs. To "re-draw" I mean you control drag from the Tab Bar Controller to the sub-view controller and select Relationship Segue (at bottom of list) => view controllers.

blocks|key|467640|text|按住Control并拖动情节提要中TabBarController中的项目，并将其重新排列到所需位置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|467641|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Control + drag the item in TabBarController in storyboard and rearrange to the desired position.

blocks|key|467778|text|添加到每个人提供的拖放方法中。我把这个贴出来作为回答，这样我就可以包括图片了。在Xcode+7.3上试用过|type|unstyled|depth|inlineStyleRanges|entityRanges|data|467779|如果您使用的是自定义tab+bar+item，则即使Tab+Bar+Controller场景显示灰色条形，条形项目仍在那里，您仍可以通过拖放进行重新排序。当您的所有栏项目都是自定义项目时，这一点尤其不明显|offset|length|style|CODE|467780|​|467781|📷|atomic|467782|467783|467784|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/717525044142d7905d7308d9b797a244.png|imageAlt|1|https://ask.qcloudimg.com/http-save/yehe-900000/3009251c2b78983c1d16562c338af75c.png^0|0|A|C|Q|I|0|0|0|1|0|0|0|1|1|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|10|8|@$D|11|E|12|F|G]|$D|13|E|14|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|15|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|16|8|@]|9|@$D|17|E|18|1|19]]|A|$]]|$1|M|3|K|5|L|7|1A|8|@]|9|@$D|1B|E|1C|1|1D]]|A|$]]|$1|N|3|I|5|6|7|1E|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|1F|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V|W|-4]]|X|$5|R|S|T|A|$U|Y|W|-4]]]]

To add on to the drag and drop method provided by everyone. I posted this as an answer so that I can include images. Tried on Xcode 7.3

If you are using custom <code>tab bar item</code>, you can still drag and drop to reorder even though the <code>Tab Bar Controller</code> scene shows a grey bar, the bar item is still there. This is especially inconspicuous when all your bar item are custom items

<a href="https://i.stack.imgur.com/odw8g.png" rel="noreferrer"><img src="https://i.stack.imgur.com/odw8g.png" alt="enter image description here"></a>
<a href="https://i.stack.imgur.com/xEkVd.png" rel="noreferrer"><img src="https://i.stack.imgur.com/xEkVd.png" alt="description"></a>

blocks|key|467850|text|对我来说，拖拽在XCode+7.3.1中也不起作用。重新启动XCode无济于事。上面提到的解决方案对我来说都不起作用。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|467851|对我有帮助的是:我删除了与第二个项目的关系，并在按住ctrl键的同时从该项目拖动到Tab+Bar+Controller，然后创建了另一个关系。现在它自动排在第二位。|467852|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

For me dragging did not work either in XCode 7.3.1. Restarting XCode did not help. And none of the above mentioned solutions worked for me.

What helped me: I deleted the relationship to the second item and ctrl-dragged from that item to the Tab Bar Controller and created another relationship. It was automatically in the second place now.

blocks|key|467921|text|使用tabbar栏删除所有视图控制器序列化。你需要第一个视图控制器，第一个片段，然后另一个视图控制器连接到tabbar栏。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|467922|不需要重新启动xcode，也不需要在更改中清除源代码文件。|467923|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Remove all viewcontrollers sequge with tabbar. You need first viewcontroller first segue then another viewcontroller connect with tabbar. 

No restart xcode &amp; no clear source code file in change require.

blocks|key|251214|text|XCODE+10.1:缩放故事板。只需拖动选项卡项即可。(没有班次，没有其他)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|251215|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

XCODE 10.1: Zoom the story board. Simply drag tab items. (No shift no other)

blocks|key|251263|text|您只需拖动选项卡栏项目并将其放在您想要的位置，如下图所示|type|unstyled|depth|inlineStyleRanges|entityRanges|data|251264|​|251265|📷|atomic|offset|length|251266|251267|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/417901d9fc62002f12fdbef9c64231f7.png|imageAlt^0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|C|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q|R|-4]]]]

You can just drag tab bar item and drop it in the place that you want, like the beneath picture
<a href="https://i.stack.imgur.com/wgchL.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/wgchL.png" alt="enter image description here" /></a>

In my app iPhone app I have a Tab Bar Controller with 4 relationships to 4 different Table View Controllers. Is there a way to rearrange the order of the relationship in the StoryBoard graphically? I can't find a way to do this and I'm sure I must be missing something!

Rearranging Tab Bar Controller Order in StoryBoard

Xcode

在我的应用程序iPhone应用程序中，我有一个标签栏控制器，它与4个不同的表视图控制器有4个关系。有没有办法在StoryBoard中以图形方式重新排列关系的顺序？我找不到这样做的方法，我确信我一定错过了什么！

问在StoryBoard中重新排列选项卡栏控制器顺序
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在StoryBoard中重新排列选项卡栏控制器顺序EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在StoryBoard中重新排列选项卡栏控制器顺序
EN