blocks|key|180040|text|清除Safari中的缓存和cookies，确保您的设备处于配置文件中，并且设备上已安装配置文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180041|如果上述所有内容都不起作用，请尝试使用更高的内部版本号创建新版本，然后再次尝试分发您的应用程序|180042|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

clear your cache and cookies in Safari, make sure your device is in provisioning profile and provisioning profile is installed on the device.

If everything mentioned above didn't help, try to create a new build with higher build number and try to distribute your app again

blocks|key|397952|text|最近，默认的Xcode项目设置将ONLY_ACTIVE_ARCH+(仅限构建活动架构)设置为yes以进行调试配置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|397953|因此，您的构建不能安装在与用于开发的硬件不同的硬件上。|397954|更改此设置，安装就会正常进行。|397955|📷|atomic|offset|length|397956|​|397957|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/296c3a6307bc9a7e0c6a248ea5226ffe.png|imageAlt^0|0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|X|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|Y|8|@]|9|@$I|Z|J|10|1|11]]|A|$]]|$1|K|3|L|5|6|7|12|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|N|$O|$5|P|Q|R|A|$S|T|U|-4]]]]

Recently default Xcode project settings set ONLY_ACTIVE_ARCH (Build Active Architecture Only) to yes for Debug configuration. 
So your build can not be installed on different hardware than the one you use for development. 
Change this setting and installation should go fine. 
<img src="https://i.stack.imgur.com/bXmwQ.png" alt="enter image description here">

blocks|key|180119|text|您可以尝试通过更改构建版本来发布应用程序。我也遇到了同样的问题，并尝试了同样的方法，只需更改tIt可能也会对您有所帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180120|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

You can try to publish the application by changing the version of the build.
I was also having the same problem and tried the same by just changing tIt may help you too.

blocks|key|398046|text|对于我将Build+Active+Architecture设置为NO...工作并安装成功|type|unstyled|depth|inlineStyleRanges|entityRanges|data|398047|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For me Setting Build Active Architecture to NO... works and installed successfully

blocks|key|180254|text|通过Xcode管理器查看控制台，查找安装失败的设备。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180255|您将从系统中获得一条有用的消息，告诉您哪里出了问题。有很多潜在的失败原因，所以除非你检查消息，否则你只是在猜测...|180256|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Watch the console through the Xcode Organiser for the device that is failing to install. 

You'll get a helpful message from the system telling you what is wrong. There are lots of potential failure reasons, so unless you check the message, you're just guessing...

blocks|key|398072|text|我只是认为这是由于网络错误/超时在不稳定的网络上。在我有了重试的好主意后，我可以看到进度条在增加。下载服务器上的HTTP+Range请求也不断增加，偏移量为几兆字节(整个应用程序大约为44MB)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|398073|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I just saw this as a result of a network error / time-out on a flaky network. I could see the progress bar increasing after I got the bright idea of just retrying. Also saw HTTP Range requests on the download server with ever increasing offsets of a few megabytes (the entire app was about 44MB).

blocks|key|180199|text|我有这个问题，但我修复了这个问题，确保我的代码签名身份与我在试飞中使用的身份相同。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180200|在那之后，一切都很好。|180201|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had this problem but I fixed this by making sure my Code Signing Identity is the SAME as the one I used in test flight.

After that, everything works fine

blocks|key|180234|text|如果您禁用了"App+Store“的蜂窝数据(例如，在度假时)，并且忘记打开它，也会发生这种情况。这里的解决方案是简单地在设置->手机中重新启用它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180235|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

This can also happen if you disable cellular data for "App Store" (for example, while on vacation) and forget to turn it back on. The solution here is to simply re-enable it in Settings -> Cellular.

blocks|key|398189|text|在我的例子中，应用程序想要使用iCloud服务，但在发行版中。未将设置配置文件设置为启用iCloud。打开它并刷新配置文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|398190|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

in my case app want to use iCloud services, but in distr. provision profile wasn't set iCloud enabled. turn it on and refresh profile.

blocks|key|180369|text|在摆弄证书(啊)之后，我也遇到了同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180370|当我关注我安装在设备上的@Duraiamuthan.H+.H的评论时，这个问题变得明显起来。设备报告0xe8008016+(授权)，请参阅SO+here|offset|length|180371|最初的原因是，testflight目标使用的是App+store分发证书，而不是团队证书。我修复了它，应用程序通过Xcode安装在设备上，然后它也可以与testflight一起工作。|180372|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/5240801/the-entitlements-specified-profile-0xe8008016-error-ios-4-2^0|0|1X|7|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@]|9|@$D|R|E|S|1|T]]|A|$]]|$1|F|3|G|5|6|7|U|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|I|$J|$5|K|L|M|A|$N|O]]]]

I have had the same issue after fiddling around with certificates (argh).

The problem became apparent as I followed the comment of @Duraiamuthan.H, I installed on a device. The device reported 0xe8008016 (Entitlements) see <a href="https://stackoverflow.com/questions/5240801/the-entitlements-specified-profile-0xe8008016-error-ios-4-2">SO here</a>

The initial reason was, that the testflight target used the App store distribution certificate, not the Team certificate. I fixed that and the application was installing on the device over Xcode and then it also worked with testflight.

blocks|key|180397|text|我也有过类似的问题。然而，当我将我的iPad计时更新为当前的计时时，我能够修复它。我刚刚查看了设备日志，发现日志中的时间显示在2年前。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180398|希望将设备计时更新到当前时间将解决此问题。|180399|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had similar issue. However, I was able to fix it when I updated my iPad timings to that of current. I just checked the device log and found that the time in the log was shown 2 years before.

Hope updating the device timing to the current time will fix the issue.

blocks|key|398340|text|缺少图标可能是一个问题。我的清单文件指向一个不存在的映像，安装过程失败。在相应的路径上放置一个图标为我解决了这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|398341|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Missing icon could be a problem. My manifest file points to a non-existing image and it fails the installation process. Placing an icon at the corresponding path solved the issue for me.

blocks|key|398370|text|我最终创建了新的配置文件，不确定是不是因为：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|398371|“临时分发设置配置文件已损坏，设备有问题。”|398372|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I ended up creating new Provisioning profiles, not sure if it was because of:

"The ad hoc distribution provisioning profile is corrupted and the device is having an issue with it."

blocks|key|398403|text|对我来说，只需卸载Testflight并重启我的iphone。在此之后，安装TestFlight，它工作得很好！|type|unstyled|depth|inlineStyleRanges|entityRanges|data|398404|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For me, just uninstall the Testflight and restart my iphone. After that, install TestFlight, it works fine !

blocks|key|180322|text|检查项目设置的常规部分中的部署目标是否大于设备的iOS版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|180323|如果是，则需要将设备版本至少更新为部署目标版本。以便您能够在设备上安装该应用程序。|180324|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Check if the deployment target in the General section of the project settings, is greater than that of your device's iOS version.

If yes then you need to update the version of your device to at least the deployment target version. in order for you to be able to install the application on your device.

i was trying to install my iphone application from testflight. it installs perfectly on few devices but in some after installing about 80 percent it gives an error "Unable to download aaplication, could not be installed at this time" i am able to find out the reason for , why is it so?
This is the screenshot:

<img src="https://i.stack.imgur.com/Cgze6.jpg" alt="could not be installed at this time">

is there anybody who will help me regarding this issue?
Thanks in advance.

iPhone app could not be installed at this time

我正在尝试从testflight安装我的iphone应用程序。它可以完美地安装在少数设备上，但在一些安装了大约80%的设备后，它给出了一个错误“无法下载应用程序，无法在此时安装”我能够找到原因，为什么会这样？这是截图：​​有没有人能帮我解决这个问题？提前谢谢。

问此时无法安装iPhone应用程序
EN

回答 15

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问此时无法安装iPhone应用程序EN

回答 15

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问此时无法安装iPhone应用程序
EN