blocks|key|146443|text|这对我很有效：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146444|install.packages('rgdal',repos="http://www.stats.ox.ac.uk/pub/RWin")|code-block|syntax|javascript|146445|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This worked for me:

<pre><code>install.packages('rgdal',repos="http://www.stats.ox.ac.uk/pub/RWin")
</code></pre>

blocks|key|146487|text|在ubuntustudio+14.04上(所有debian发行版都一样)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146488|sudo+apt-get+install+libproj-dev+libgdal-dev|code-block|syntax|javascript|146489|然后我就可以安装包rgdal了|146490|R+info:
R+version+3.0.2+(2013-09-25)+--+"Frisbee+Sailing"

Linux+info:
Linux+francois-K53SV+3.13.0-34-lowlatency+#60-Ubuntu+SMP+PREEMPT+Wed+Aug+13+16:15:18+UTC+2014+x86_64+x86_64+x86_64+GNU/Linux|146491|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

On ubuntustudio 14.04 (same for all debian distros):

<pre><code>sudo apt-get install libproj-dev libgdal-dev
</code></pre>

Then I could install package rgdal

<pre><code>R info:
R version 3.0.2 (2013-09-25) -- "Frisbee Sailing"

Linux info:
Linux francois-K53SV 3.13.0-34-lowlatency #60-Ubuntu SMP PREEMPT Wed Aug 13 16:15:18 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
</code></pre>

blocks|key|146544|text|在我系统上唯一可以工作的事情就是按照here的描述从源代码编译PROJ4，然后按照如下方式安装rgdal包|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|146545|+install.packages("rgdal")|code-block|syntax|javascript|146546|entityMap|0|LINK|mutability|MUTABLE|url|http://grasswiki.osgeo.org/wiki/Compile_and_Install_Ubuntu#Using_pre-compiled_dev_Packages_for_PROJ.4.2C_GEOS_and_GDAL^0|I|4|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@$A|R|B|S|1|T]]|C|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|C|$G|H]]|$1|I|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|J|$K|$5|L|M|N|C|$O|P]]]]

The only thing that worked on my system was to compile PROJ4 from source as described <a href="http://grasswiki.osgeo.org/wiki/Compile_and_Install_Ubuntu#Using_pre-compiled_dev_Packages_for_PROJ.4.2C_GEOS_and_GDAL" rel="nofollow" title="Compile PROJ.4">here</a> and then instal the rgdal package as

<pre><code> install.packages("rgdal")
</code></pre>

blocks|key|146570|text|在使用R-3.2.0的Fedora+21系统上，执行以下操作：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146571|yum+install+gdal.x86_64+gdal-devel.x86_64+gdal-libs.x86_64
yum+install+proj.x86_64+proj-devel.x86_64
yum+install+proj-epsg.x86_64+proj-nad.x86_64|code-block|syntax|javascript|146572|显然，这是反复尝试获取的结果：|146573|install.packages("rgdal")|146574|去工作。您可能可以在一次安装中完成所有这些操作。|146575|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

On a Fedora 21 system using R-3.2.0, the following worked:

<pre><code>yum install gdal.x86_64 gdal-devel.x86_64 gdal-libs.x86_64
yum install proj.x86_64 proj-devel.x86_64
yum install proj-epsg.x86_64 proj-nad.x86_64
</code></pre>

Obviously this was the result of repeated tries to get:

<pre><code>install.packages("rgdal")
</code></pre>

to work. You can probably do it all in one install.

blocks|key|146584|text|在OSX中，我从http://www.kyngchaos.com/software/frameworks下载项目，然后在R中运行以下命令。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|146585|install.packages('rgdal',+type+=+"source",+configure.args=c('--with-proj-include=/Library/Frameworks/PROJ.framework/Headers',+'--with-proj-lib=/Library/Frameworks/PROJ.framework/unix/lib'))|code-block|syntax|javascript|146586|entityMap|0|LINK|mutability|MUTABLE|url|http://www.kyngchaos.com/software/frameworks^0|8|18|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@$A|R|B|S|1|T]]|C|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|C|$G|H]]|$1|I|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|J|$K|$5|L|M|N|C|$O|P]]]]

In OSX, I download proj from <a href="http://www.kyngchaos.com/software/frameworks" rel="noreferrer">http://www.kyngchaos.com/software/frameworks</a> and I run the following command in R.

<pre><code>install.packages('rgdal', type = "source", configure.args=c('--with-proj-include=/Library/Frameworks/PROJ.framework/Headers', '--with-proj-lib=/Library/Frameworks/PROJ.framework/unix/lib'))
</code></pre>

blocks|key|364833|text|下面是我在Centos7上做的事情：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|364834|yum+install+gdal+gdal-devel
yum+install+proj-devel
yum+install+proj-nad
yum+install+proj-epsg|code-block|syntax|javascript|364835|然后简单地|364836|install.packages("rgdal")|offset|length|style|CODE|364837|工作得很好，但一点也不清楚。|364838|entityMap^0|0|0|0|0|P|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|V|8|@$K|W|L|X|M|N]]|9|@]|A|$]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

Here what i did on Centos7:

<pre><code>yum install gdal gdal-devel
yum install proj-devel
yum install proj-nad
yum install proj-epsg
</code></pre>

Then simply

<code>install.packages("rgdal")</code>

Worked fine but it wasn't clear at all.

blocks|key|364850|text|对于安装了多个版本的proj的多用户环境中的人员(来自源代码)，我使用的方法是：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|364851|install.packages('rgdal',configure.args="--with-proj-include=/sw/proj/4.9.2/include+--with-proj-lib=/sw/proj/4.9.2/lib")|code-block|syntax|javascript|364852|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

For people in multi-user environments with multiple versions of proj installed (from source), the method I used was:

<pre><code>install.packages('rgdal',configure.args="--with-proj-include=/sw/proj/4.9.2/include --with-proj-lib=/sw/proj/4.9.2/lib")
</code></pre>

blocks|key|146637|text|对我来说(Ubuntu+16.04，R+3.4.2)，上述解决方案的混合有效：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146638|sudo+apt-get+install+libudunits2-dev+libgdal-dev+libgeos-dev+libproj-dev|code-block|syntax|javascript|146639|然后简单地从CRAN安装rgdal。|offset|length|style|CODE|146640|entityMap^0|0|0|C|5|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

For me (Ubuntu 16.04, R 3.4.2), a mixture of the above solutions worked:

<pre><code>sudo apt-get install libudunits2-dev libgdal-dev libgeos-dev libproj-dev
</code></pre>

Then simply installed <code>rgdal</code> from CRAN.

blocks|key|364894|text|对于ubuntu+16.04和R+3.5.1，这是相当快的：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|364895|sudo+add-apt-repository+-y+ppa:ubuntugis/ubuntugis-unstable
sudo+apt+update
sudo+apt+install+gdal-bin+python-gdal+python3-gdal+libgdal1-dev|code-block|syntax|javascript|364896|然后；|364897|sudo+apt-get+install+libudunits2-dev+libgdal-dev+libgeos-dev+libproj-dev|364898|最后在CRAN中；|364899|install.packages("rgdal")|364900|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|S|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|U|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

For ubuntu 16.04 and R 3.5.1, this works quite fast:

<pre><code>sudo add-apt-repository -y ppa:ubuntugis/ubuntugis-unstable
sudo apt update
sudo apt install gdal-bin python-gdal python3-gdal libgdal1-dev
</code></pre>

Then;

<pre><code>sudo apt-get install libudunits2-dev libgdal-dev libgeos-dev libproj-dev
</code></pre>

Finally in CRAN;

<pre><code>install.packages("rgdal")
</code></pre>

blocks|key|364914|text|要解决此问题，您需要install+libgdal-dev:|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|364915|$+sudo+apt+install+libgdal-dev|364916|entityMap^0|A|K|0|2|S|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|P|8|@]|D|@]|E|$]]]|I|$]]

To fix this you need to <code>install libgdal-dev:</code>

$ <code>sudo apt install libgdal-dev</code>

blocks|key|364952|text|上面的答案对我都不起作用(在Linux+Mint+17.1上运行R3.5.1)。Ubuntu仓库中的GDAL版本是1.11.3，这会导致rGDAL安装失败。以下是对我有效的解决方案(来自this网站)：|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|364953|sudo+apt-get+install+libexpat1-dev|code-block|syntax|javascript|364954|下载并安装GDAL|364955|wget+http://download.osgeo.org/gdal/2.1.1/gdal-2.1.1.tar.gz
tar+xvf+gdal-2.1.1.tar.gz
cd+gdal-2.1.1
./configure
sudo+make
sudo+make+install|364956|验证版本|364957|gdal-config+--version|364958|然后我得到了这个错误：|364959|**+testing+if+installed+package+can+be+loaded
Error+in+dyn.load(file,+DLLpath+=+DLLpath,+...)+:
unable+to+load+shared+object+'/usr/local/lib/R/site-library/rgdal/libs/rgdal.so':
libgdal.so.20:+cannot+open+shared+object+file:+No+such+file+or+directory
Error:+loading+failed
Execution+halted
ERROR:+loading+failed|364960|这是通过更新绑定修复的：|364961|sudo+ldconfig|364962|然后在R中运行install.packages("rgdal")运行得很好。|style|CODE|364963|entityMap|0|LINK|mutability|MUTABLE|url|https://jgommels.com/2016/09/18/installing-gdal-and-rgdal-on-linux-to-read-kml-files/^0|2L|4|0|0|0|0|0|0|0|0|0|0|0|7|P|0^^$0|@$1|2|3|4|5|6|7|1A|8|@]|9|@$A|1B|B|1C|1|1D]]|C|$]]|$1|D|3|E|5|F|7|1E|8|@]|9|@]|C|$G|H]]|$1|I|3|J|5|6|7|1F|8|@]|9|@]|C|$]]|$1|K|3|L|5|F|7|1G|8|@]|9|@]|C|$G|H]]|$1|M|3|N|5|6|7|1H|8|@]|9|@]|C|$]]|$1|O|3|P|5|F|7|1I|8|@]|9|@]|C|$G|H]]|$1|Q|3|R|5|6|7|1J|8|@]|9|@]|C|$]]|$1|S|3|T|5|F|7|1K|8|@]|9|@]|C|$G|H]]|$1|U|3|V|5|6|7|1L|8|@]|9|@]|C|$]]|$1|W|3|X|5|F|7|1M|8|@]|9|@]|C|$G|H]]|$1|Y|3|Z|5|6|7|1N|8|@$A|1O|B|1P|10|11]]|9|@]|C|$]]|$1|12|3|-4|5|6|7|1Q|8|@]|9|@]|C|$]]]|13|$14|$5|15|16|17|C|$18|19]]]]

None of the above answers worked for me (running R 3.5.1 on Linux Mint 17.1). GDAL version in the Ubuntu repositories is 1.11.3, this causes installation of rGDAL to fail. Here is the solution that worked for me (from <a href="https://jgommels.com/2016/09/18/installing-gdal-and-rgdal-on-linux-to-read-kml-files/" rel="nofollow noreferrer">this</a> website):

<pre><code>sudo apt-get install libexpat1-dev
</code></pre>

Download and install GDAL

<pre><code>wget http://download.osgeo.org/gdal/2.1.1/gdal-2.1.1.tar.gz
tar xvf gdal-2.1.1.tar.gz
cd gdal-2.1.1
./configure
sudo make
sudo make install
</code></pre>

Verify version

<pre><code>gdal-config --version
</code></pre>

I then got this error:

<pre><code>** testing if installed package can be loaded
Error in dyn.load(file, DLLpath = DLLpath, ...) :
unable to load shared object '/usr/local/lib/R/site-library/rgdal/libs/rgdal.so':
libgdal.so.20: cannot open shared object file: No such file or directory
Error: loading failed
Execution halted
ERROR: loading failed
</code></pre>

This was fixed by updating the bindings:

<pre><code>sudo ldconfig
</code></pre>

Then running <code>install.packages("rgdal")</code> in R worked fine.

blocks|key|146769|text|无法让rgdal正确安装，我已经尝试了所有提到的和这里的所有建议R+not+finding+package+even+after+package+installation|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|146770|library(rgdal)
rgdal:+version:+1.4-3,+(SVN+revision+828)
Geospatial+Data+Abstraction+Library+extensions+to+R+successfully+loaded
Loaded+GDAL+runtime:+GDAL+2.2.3,+released+2017/11/20
Path+to+GDAL+shared+files:+C:/Users/xxx/Documents/R/win-library/3.4/rgdal/gdal
GDAL+binary+built+with+GEOS:+TRUE+
Loaded+PROJ.4+runtime:+Rel.+4.9.3,+15+August+2016,+[PJ_VERSION:+493]
Path+to+PROJ.4+shared+files:+C:/Users/xxx/Documents/R/win-library/3.4/rgdal/proj
Linking+to+sp+version:+1.3-1+
Warning+message:
package+‘rgdal’+was+built+under+R+version+3.4.4|code-block|syntax|javascript|146771|我已经把R升级到了3.6.1|146772|重试：|146773|batch_gdal_translate(x,+desc,+outsuffix+=+"4.img",+of+=+"HFA",+co="TILED=YES")
NULL
Warning+messages:
1:+In+gdal_setInstallation()+:
No+GDAL+installation+found.+Please+install+'gdal'+before+continuing:
++++-+www.gdal.org+(no+HDF4+support!)
++++-+www.trac.osgeo.org/osgeo4w/+(with+HDF4+support+RECOMMENDED)
++++-+www.fwtools.maptools.org+(with+HDF4+support)

2:+In+gdal_setInstallation()+:+If+you+think+GDAL+is+installed,+please+run:
gdal_setInstallation(ignore.full_scan=FALSE)|146774|我已经尝试过从Rstudio和命令行R+3.6.1+GUI运行它。|146775|每次我尝试这样做的时候，我都得到了正在安装的库的肯定结果。|146776|library(raster)
Loading+required+package:+sp
library(rgdal)
rgdal:+version:+1.4-4,+(SVN+revision+833)
Geospatial+Data+Abstraction+Library+extensions+to+R+successfully+loaded
Loaded+GDAL+runtime:+GDAL+2.2.3,+released+2017/11/20
Path+to+GDAL+shared+files:+C:/Users/xxx/Documents/R/R-3.6.1/library/rgdal/gdal
GDAL+binary+built+with+GEOS:+TRUE+
Loaded+PROJ.4+runtime:+Rel.+4.9.3,+15+August+2016,+[PJ_VERSION:+493]
Path+to+PROJ.4+shared+files:+C:/Users/xxx/Documents/R/R-3.6.1/library/rgdal/proj
Linking+to+sp+version:+1.3-1+
library(gdalUtils)
Registered+S3+method+overwritten+by+'R.oo':
method++++++++from+++++++
throw.default+R.methodsS3|146777|我尝试读取的文件是dted文件吗？|146778|x+<-+list.files(path+=+src,+pattern+=+".dt",+full.names+=+TRUE)
length(x)

batch_gdal_translate(x,+desc,+outsuffix+=+"4.img",+of+=+"HFA",+co="TILED=YES")|146779|我也用GTIFF+.tif格式尝试了上面的方法，我得到了同样的错误。但我并不是要读取.hdf文件，而是读取.dt0、.dt1、.dt2|146780|这将在我安装了R的另一台机器上工作，但是，我正在尝试找出我在“这台”机器上的安装有什么问题。|146781|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/19407092/r-not-finding-package-even-after-package-installation^0|W|1H|0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1A|8|@]|9|@$A|1B|B|1C|1|1D]]|C|$]]|$1|D|3|E|5|F|7|1E|8|@]|9|@]|C|$G|H]]|$1|I|3|J|5|6|7|1F|8|@]|9|@]|C|$]]|$1|K|3|L|5|6|7|1G|8|@]|9|@]|C|$]]|$1|M|3|N|5|F|7|1H|8|@]|9|@]|C|$G|H]]|$1|O|3|P|5|6|7|1I|8|@]|9|@]|C|$]]|$1|Q|3|R|5|6|7|1J|8|@]|9|@]|C|$]]|$1|S|3|T|5|F|7|1K|8|@]|9|@]|C|$G|H]]|$1|U|3|V|5|6|7|1L|8|@]|9|@]|C|$]]|$1|W|3|X|5|F|7|1M|8|@]|9|@]|C|$G|H]]|$1|Y|3|Z|5|6|7|1N|8|@]|9|@]|C|$]]|$1|10|3|11|5|6|7|1O|8|@]|9|@]|C|$]]|$1|12|3|-4|5|6|7|1P|8|@]|9|@]|C|$]]]|13|$14|$5|15|16|17|C|$18|19]]]]

Unable to get rgdal to install properly, I have tried all mentioned and all suggestions here <a href="https://stackoverflow.com/questions/19407092/r-not-finding-package-even-after-package-installation">R not finding package even after package installation</a>

<pre><code>library(rgdal)
rgdal: version: 1.4-3, (SVN revision 828)
Geospatial Data Abstraction Library extensions to R successfully loaded
Loaded GDAL runtime: GDAL 2.2.3, released 2017/11/20
Path to GDAL shared files: C:/Users/xxx/Documents/R/win-library/3.4/rgdal/gdal
GDAL binary built with GEOS: TRUE 
Loaded PROJ.4 runtime: Rel. 4.9.3, 15 August 2016, [PJ_VERSION: 493]
Path to PROJ.4 shared files: C:/Users/xxx/Documents/R/win-library/3.4/rgdal/proj
Linking to sp version: 1.3-1 
Warning message:
package ‘rgdal’ was built under R version 3.4.4
</code></pre>

I have upgraded my R to 3.6.1

Try again:

<pre><code>batch_gdal_translate(x, desc, outsuffix = "4.img", of = "HFA", co="TILED=YES")
NULL
Warning messages:
1: In gdal_setInstallation() :
No GDAL installation found. Please install 'gdal' before continuing:
 - www.gdal.org (no HDF4 support!)
 - www.trac.osgeo.org/osgeo4w/ (with HDF4 support RECOMMENDED)
 - www.fwtools.maptools.org (with HDF4 support)

2: In gdal_setInstallation() : If you think GDAL is installed, please run:
gdal_setInstallation(ignore.full_scan=FALSE)
</code></pre>

i have tried to run this from Rstudio &amp; command line R 3.6.1 GUI.

all times I have tried this I get positive results for the libraries being installed.

<pre><code>library(raster)
Loading required package: sp
library(rgdal)
rgdal: version: 1.4-4, (SVN revision 833)
Geospatial Data Abstraction Library extensions to R successfully loaded
Loaded GDAL runtime: GDAL 2.2.3, released 2017/11/20
Path to GDAL shared files: C:/Users/xxx/Documents/R/R-3.6.1/library/rgdal/gdal
GDAL binary built with GEOS: TRUE 
Loaded PROJ.4 runtime: Rel. 4.9.3, 15 August 2016, [PJ_VERSION: 493]
Path to PROJ.4 shared files: C:/Users/xxx/Documents/R/R-3.6.1/library/rgdal/proj
Linking to sp version: 1.3-1 
library(gdalUtils)
Registered S3 method overwritten by 'R.oo':
method from 
throw.default R.methodsS3
</code></pre>

the files I am trying to read are dted files?

<pre><code>x &lt;- list.files(path = src, pattern = ".dt", full.names = TRUE)
length(x)

batch_gdal_translate(x, desc, outsuffix = "4.img", of = "HFA", co="TILED=YES")
</code></pre>

I have tried the above with GTIFF .tif format also and I get the same error.
But I am not trying to read .hdf files, just .dt0, .dt1, .dt2

this will work on another machine that I have R installed on, however, I am trying to figure out what is wrong with the installation I have on "this" machine.

blocks|key|146799|text|在CFLAGS中显式添加include路径对我来说很有效|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146800|install.packages('rgdal',+type+=+"source",+configure.args=c('CFLAGS=-I/apps/proj4/5.2.0/include'))|code-block|syntax|javascript|146801|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Explicitly adding the include path in CFLAGS worked for me

<pre><code>install.packages('rgdal', type = "source", configure.args=c('CFLAGS=-I/apps/proj4/5.2.0/include'))
</code></pre>

The issue here is not exactly how to plot maps through R, as I have found already a pretty nice example <a href="http://rpsychologist.com/parsing-data-from-a-text-file-and-plotting-where-people-live-using-ggplot2-and-openstreetmaps/" rel="noreferrer">here</a>, but rather how to make it work. In fact, I am unable to load library <code>rgdal</code>:

<pre><code>library(rgdal)
Error in library(rgdal) : there is no package called ‘rgdal’
</code></pre>

However, when I try to install the above package manually, I get the following error:

<pre><code>....
configure: error: proj_api.h not found in standard or given locations.
ERROR: configuration failed for package ‘rgdal’
* removing ‘/home/eualin/R/i686-pc-linux-gnu-library/2.15/rgdal’
Warning in install.packages : installation of package ‘/home/eualin/Downloads/rgdal_0.8-5.tar.gz’ had non-zero exit status
</code></pre>

Any input welcome!

rgdal package installation

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

这里的问题并不是如何通过R绘制地图，因为我已经发现了一个非常好的示例，而是如何使其工作。实际上，我无法加载库rgdallibrary(rgdal)Error in library(rgdal) : there is no package called ‘rgdal’但是，当我尝试手动安装上面的包时，我得到了以下错误：....

问rgdal包安装
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问rgdal包安装EN