用C#和C语言进行USB到串行通信
用C#和C语言进行USB到串行通信
提问于 2013-12-18 00:57:24
这是我第一次发布我的查询。我需要帮助。任何帮助都是非常感谢的。
因为我同意我已经把我的预言说成是长话短说。但很抱歉，我没有弄明白如何使它短，我的意图是提供完整的信息，我的计划。
问题:我必须在windows平台上使用USB到串行适配器在两台笔记本电脑之间进行通信.我写了两个程序，一个发送程序，一个接收程序。程序用C语言和C#编程语言编写。
使用C语言:我能够成功地使用下面提到的C程序进行通信.但问题是速度。只要超过150 It，大约需要1小时(60分钟)。任何人请帮助我提高这个程序的性能，或者你可以建议我其他的方法，这是健壮和高性能的。我还提到了一些评论和自我理解的程序。
带有串行端口的膝上型计算机上的发送方文件：
#include <stdio.h>
#include <bios.h>
#include <conio.h>
#define COM1 0
#define DATA_READY 0x100
#define TRUE 1
#define FALSE 0
#define SETTINGS ( 0xE0 | 0x03 | 0x00 | 0x00)
int main(void)
{
int in, out, status, DONE = FALSE,i=0;
char c;
FILE *fp,*fp1;
unsigned long count = 0,shiftcount = 0;
clrscr();
fp = fopen("C:/TC/pic.jpg","rb"); //opened for reading actual content
fp1 = fopen("C:/TC/pic.jpg","rb"); //opened for reading the size of file
fseek(fp1,0L,2);
count = ftell(fp1) + 1; // file size
bioscom(0, SETTINGS, COM1); // initializing the port
printf("No. of Characters = %lu\n",count);
// since bioscom function can send or receive only 8bits at a time, am sending file size in
4 rounds so that we can send at max of 4GB file.
bioscom(1,count,COM1); // sneding 1st lower 8bits
bioscom(1,count>>8,COM1); // sending 2nd set of lower 8bits
bioscom(1,count>>16,COM1); // sending 3rd set of lower 8bits
bioscom(1,count>>24,COM1); // sending upper 8 bits
cprintf("... BIOSCOM [ESC] to exit ...\n");
while (!DONE)
{
status = bioscom(3, 0, COM1);// get the status of port
//printf("%d",status);
if (status & DATA_READY) //checks if data is ready
{
out = bioscom(2, 0, COM1); // receives the ack
if(!feof(fp))
{
c = fgetc(fp); //read character by character from file
bioscom(1,c,COM1);//send character to receiver
putch(c);//display
}
}
//to interrupt
if (kbhit())
{
if ((in = getch()) == '\x1B')
DONE = TRUE;
}
}
fclose(fp);
return 0;
}通过USB端口在笔记本电脑上接收文件：
#include <stdio.h>
#include <bios.h>
#include <conio.h>
#define COM4 3
#define DATA_READY 0x100
#define TRUE 1
#define FALSE 0
#define SETTINGS ( 0xE0 | 0x03 | 0x00 | 0x00)
int main(void)
{
int in, out, status;
char c;
FILE *fp;
unsigned long shiftcount1=0,shiftcount2=0,shiftcount3=0,shiftcount4=0;
unsigned long count = 0, DONE = 1;
clrscr();
fp = fopen("C:/TC/pic1.jpg","wb");// file opened for writing
bioscom(0, SETTINGS, COM4);//initialize tyhe port
cprintf("... BIOSCOM [ESC] to exit ...\n");
//receives all the 32 bits of file size sent from sender
shiftcount1 = bioscom(2,0,COM4);
shiftcount2 = bioscom(2,0,COM4);
shiftcount3 = bioscom(2,0,COM4);
shiftcount4 = bioscom(2,0,COM4);
//send an ack
bioscom(1,'x',COM4);
count = shiftcount1 | (shiftcount2<<8) | (shiftcount3<<16) | (shiftcount4<<24);
printf("shift4 = %lu\tshift3 = %lu\tshift2 = %lu\tshift1 = %lu\n",shiftcount4,shiftcount3,shiftcount2,shiftcount1);
printf("File Size = %lu\n",count);
//loop till the size of the file
while (DONE < count)
{
status = bioscom(3, 0, COM4);// check the status
// printf("%d",status);
if (status & DATA_READY)//check for data ready at the port
{
out = bioscom(2, 0, COM4);//receive the data
DONE++;
fputc(out,fp);
putch(out);
bioscom(1,'x',COM4);//send an ack
}
if (kbhit())
{
if ((in = getch()) == '\x1B')
break;
}
}
fclose(fp);
return 0;
}带有USB端口的膝上型计算机上的发送文件：
#include <stdio.h>
#include <bios.h>
#include <conio.h>
#include<dos.h>
#include<stdlib.h>
#include<time.h>
#define RTS 0x02
#define COM1 0
#define COM4 3
#define CURRCOM COM4
#define DATA_READY 0x100
#define TRUE 1
#define FALSE 0
#define SETTINGS ( 0xE0 | 0x03 | 0x00 | 0x00)
int main(void)
{
int in, out, status, DONE = FALSE,nextfile = 1;
char c;
FILE *fp,*fp1;
unsigned long count = 0,shiftcount = 0;
clock_t start,end;
start = clock();
clrscr();
fp = fopen("C:/TC/pic.jpg","rb");
fp1 = fopen("C:/TC/pic.jpg","rb");
fseek(fp1,0L,2);
count = ftell(fp1) + 1;
bioscom(0, SETTINGS, CURRCOM);
/* while(!feof(fp1))
{
c = fgetc(fp1);
count++;
} */
printf("No. of Cheracters = %lu\n",count);
bioscom(1,count,CURRCOM);
bioscom(1,count>>8,CURRCOM);
bioscom(1,count>>16,CURRCOM);
bioscom(1,count>>24,CURRCOM);
cprintf("\n... BIOSCOM [ESC] to exit ...\n");
while (!DONE)
{
status = bioscom(3, 0, CURRCOM);
if (status & DATA_READY)
{
out = bioscom(2,0,CURRCOM);
if(!feof(fp))
{
c = fgetc(fp);
bioscom(1,c,CURRCOM);
putch(c);
}
}
if (kbhit())
{
if ((in = getch()) == '\x1B')
DONE = TRUE;
}
}
fclose(fp);
end = clock();
printf("\nTotal time = %d\n",(end - start)/CLK_TCK);
return 0;
}带有串口的膝上型计算机上的接收器文件：
#include <stdio.h>
#include <bios.h>
#include <conio.h>
#include<time.h>
#define COM1 0
#define DATA_READY 0x100
#define TRUE 1
#define FALSE 0
#define SETTINGS ( 0xE0 | 0x03 | 0x00 | 0x00)
int main(void)
{
int in, out, status;
char c;
FILE *fp;
int y = 0,esc;
unsigned long count=0,shiftcount1 = 0,shiftcount2 = 0,shiftcount3 = 0,shiftcount4 = 0, DONE = 1;
clock_t start,end;
start = clock();
clrscr();
fp = fopen("C:/TC/pic1.jpg","wb");
bioscom(0, SETTINGS, COM1);
cprintf("... BIOSCOM [ESC] to exit ...\n");
shiftcount1 = bioscom(2,0,COM1);
shiftcount2 = bioscom(2,0,COM1);
shiftcount3 = bioscom(2,0,COM1);
shiftcount4 = bioscom(2,0,COM1);
bioscom(1,'x',COM1);
count = shiftcount1 | (shiftcount2<<8) | (shiftcount3<<16) | (shiftcount4<<24);
printf("shift4 = %lu\tshift3 = %lu\tshift2 = %lu\t shift1 = %lu\n",shiftcount4,shiftcount3,shiftcount2,shiftcount1);
printf("file size = %lu\n",count);
while (DONE < count)
{
status = bioscom(3, 0, COM1);
//printf("%d",status);
if (status & DATA_READY)
{
out = bioscom(2, 0, COM1);
DONE++;
fputc(out,fp);
putch(out);
bioscom(1,'x',COM1);
}
if (kbhit())
{
if ((in = getch()) == '\x1B')
break;
}
}
fclose(fp);
end = clock();
printf("\nTotal time = %f\n",(end - start)/CLK_TCK);
return 0;
}以上4个程序作为发送者发送一个字符并接收每个字符的ack。我采用了这种方法，因为其他方法没有很好地工作(在这个意义上，没有发送完整的数据，发送的数据量是无法判断的，因为它会因类型不同而不同)。当我使用这种方法时，效果很好。
使用C#语言:下面两个程序是使用visual用C#编写的。我使用了SerilaPort类、它的属性和通信方法。利用此，可以将successfully.Also图像文件的两侧的.jpg图像文件与.jpg扩展通信，可以在没有任何数据丢失(成功传输)的情况下从USB传输到串行端，但是如果我从串行传输到usb端，就可以接收到一些数据丢失的图像，即使是数据丢失也能看到图像。
带有串口的膝上型计算机上的发送方文件：
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.IO.Ports;
using System.IO;
using System.Threading;
namespace Communication
{
class Program
{
static void Main(string[] args)
{
string name;
string message;
StringComparer stringComparer = StringComparer.OrdinalIgnoreCase;
//Thread readThread = new Thread(Read);
FileStream fs = new FileStream("C:/text.xml", FileMode.Open);
//StreamReader sr = new StreamReader(fs);
BinaryReader br = new BinaryReader(fs);
// Create a new SerialPort object with default settings.
SerialPort _serialPort = new SerialPort();
// Allow the user to set the appropriate properties.
_serialPort.PortName = "COM1";
_serialPort.BaudRate = 115200;
_serialPort.Parity = Parity.None;
_serialPort.DataBits = 8;
_serialPort.StopBits = StopBits.One;
_serialPort.Handshake = Handshake.None;
// Set the read/write timeouts
_serialPort.ReadTimeout = 500;
_serialPort.WriteTimeout = 500;
_serialPort.Open();
bool _continue = true;
//readThread.Start();
int len = (int)fs.Length;
char[] data = new char[len+1];
br.Read(data, 0, len);
for (int i = 0; i < len+1; i++)
{
_serialPort.Write(data, i, 1);
//Console.Write(data,i,1);
}
br.Close();
fs.Close();
_serialPort.Close();
}
}
}带有USB端口的膝上型计算机接收器文件：
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.IO.Ports;
using System.IO;
using System.Threading;
using System.Collections;
namespace Communication
{
class Program
{
static void Main(string[] args)
{
SerialComm comm = new SerialComm();
comm.Init();
comm.ReadSerial();
comm.WriteToFile();
comm.ResClose();
Console.ReadKey();
}
}
class SerialComm
{
FileStream fs = null;
BinaryWriter file = null;
ArrayList al = null;
public Boolean Init()
{
if (fs == null)
{
fs = new FileStream("C:/text1.txt", FileMode.OpenOrCreate);
}
if (file == null)
{
file = new BinaryWriter(fs);
}
if (al == null)
{
al = new ArrayList();
}
return true;
}
public void ResClose()
{
file.Close();
fs.Close();
}
public Boolean ReadSerial()
{
SerialPort port;
StreamWriter sw;
ConsoleKeyInfo ck;
port = new SerialPort();
port.PortName = "COM4";
port.BaudRate = 115200;
port.DataBits = 8;
port.Parity = Parity.None;
port.StopBits = StopBits.One;
port.Handshake = Handshake.None;
port.Open();
port.BaseStream.Flush();
port.DiscardInBuffer();
int c = 1;
while (c != 0)
{
c = port.ReadByte();
al.Add((byte)c);
}
return true;
}
public void WriteToFile()
{
int i = 0;
byte[] message = al.ToArray(typeof(byte)) as byte[];
file.Write(message, 0, message.Length - 1);
}
}
}请帮帮我。
提前谢谢。
回答 2
Stack Overflow用户
发布于 2013-12-18 01:20:19
传输速度：
串行端口简单，不快。我假设您使用的是230 many，这已经超出了许多硬件所能处理的范围。压缩是唯一可能有帮助的事情，但是压缩已经压缩的数据(如.mp3)不会有多大帮助。
数据丢失：
串行端口简单，不健壮。数据丢失是很常见的，您唯一能做的就是有协议来检测传入帧上的错误，并且有能力在出现错误时重试发送。
结论：
使用TCP/IP代替。
Stack Overflow用户
发布于 2013-12-18 01:20:27
这个问题太长了。我只发现了一个真正的问题，那就是性能问题。
只需使用以太网或WiFi。“串口”(您可能指的是RS-232)的速度是低。0.1Mbit/秒被RS-232标准认为是快速的。时钟为1200 Mbit/3600秒，即0.3 Mbit/秒。太快了。事实上，我很惊讶您实现了这一点，您的C#程序显式地将速度设置为0.1Mbit/秒。
页面原文内容由Stack Overflow提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://stackoverflow.com/questions/20653528
复制相关文章
相似问题
腾讯云开发者
