我正在尝试在我的脚本中创建一个交换分区,使用parted,基于Arch指南。
https://wiki.archlinux.org/title/Parted#Partition_方案
不知怎么的,它总是跳过文件系统类型,而使用它作为分区标签。
手动运行parted的
创建正确的文件系统linux- manually (V1).
。
root@NAS[~]# parted /dev/sdb
GNU Parted 3.4
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(
我在我的AWS Ubuntu t2微系统上得到了这个错误。我是Ubuntu/Linux的新手。在安装nodejs软件包时,它建议我运行sudo apt-get -f install。任何帮助都将不胜感激。
$sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following additional packages will be installed
我有Ubuntu11.10,hibernate不在这台机器上工作。
我查看了这个职位,在字符串# swap was on /dev/…..之后,什么也没有出现。
我找不到文件:/usr/lib/hal/scripts/linux/hal-system-power-suspend-linux。此外,s2disk不能正常工作,计算机也不能休眠。
现在我甚至不能关闭这个系统--这个过程还没有完成。每次我都要按下电源按钮。
不久前,我用加密的home和交换分区安装了Kubuntu15.04。一切都很有魅力,但是今天我决定在另一个分区上安装Kali Linux (在任何地方都不需要加密,需要它来工作)。
我忘记了加密的交换分区,认为共享交换可能是个好主意,所以我把它格式化为一个常规交换。现在,我不知道如何恢复到以前的配置。我试图再次将其格式化为一个常规交换分区,然后使用swapon,然后使用ecryptfs-setup-swap,但在此之后它会冻结:
Do you want to proceed with encrypting your swap? [y/N]: y
INFO: Setting up swap:
我正在一个Java jar的Amazon实例上运行一些web应用程序,但是在12个小时左右之后,它总是会耗尽内存。下面是写入文件的错误消息:
There is insufficient memory for the Java Runtime Environment to continue.
Native memory allocation (malloc) failed to allocate 12288 bytes for
committing reserved memory.
Possible reasons:
The syst
我最近在/tmp上遇到了一个“溢出”问题。我没有单独的/tmp分区,/中有17%是免费的--那么为什么我会得到一个溢出的tmp文件系统呢?
📷
📷
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works ev
在这个问题中的中,在顶部答案中,在实现交换公共朋友重载的部分中,实现使用以下内容:
friend void swap(dumb_array& first, dumb_array& second){
//the line of code below
using std::swap;
//then it calls the std::swap function on data members of the dumb_array`s
}
我的问题是:这里使用的using std::swap是什么(答案提到了与启用ADL相关的东西);这里具体调用了什么“使用”用
在安装linux的大多数发行版(如果不是全部的话)期间,硬盘驱动器被划分为默认包含一个交换分区。
使用swapon -p priority可以更改此行为。
根据手册页,优先事项是:
PRIORITY
Each swap area has a priority, either high or low. The default priority is
low. Within the low-priority areas, newer areas are even lower priority
than older areas.
All priorities set with swapflags