我正在执行一次扫描,一切工作正常!除了当我尝试打印它正在读取的当前值时...它打印的是我使用的SPCI命令的字符数。代码如下: import pyvisa
import time
import serial
# configure the serial connections (the parameters differs on the device you are connecting to)
ser = serial.Serial()
ser.port = 'COM3'
ser.baudrate = 9600
ser.open()
ser.isOpen
###
我正在开发一个应用程序,从COM端口获取字节并管理它们。
不幸的是,我没有机会在pc上工作,这个应用程序将运行,所以我需要一种方式发送“假数据”在我的COM端口,以便我的应用程序可以阅读。
无论我做什么,在选定的COM端口上都没有可用的字节。
这是一个基本的样本:
'First I create and open desired COM port
Dim port = New SerialPort(cboPorts.SelectedItem, 9600, Parity.None, 8, StopBits.One)
port.Open()
If Not port.IsOpen Then
据我所知,在Linux中,来自硬件设备的输入可以被认为是将数据写入文件,所以我认为在不使用X的情况下向/dev/input/mice编写一些东西来模拟鼠标点击是很有可能的。
这就是我所做的:
root@linux:~$ sudo cat /dev/input/mice >> right-click
(click the right button of your mouse, and then press ctrl+c to terminate it.)
root@linux:~$ sudo cat right-click >> /dev/input/mice
我这样做是
我正在编写一个连接到USB串行设备的python脚本。无论何时发送和执行命令,PIC都会返回一个hashtag。即。“命令执行成功。\n#”
我希望我的python脚本在输出数据之前等待hashtag。我该怎么做呢?这就是我所拥有的。它似乎并不实际打印从PIC收到的文本。任何帮助我们都将不胜感激
if port.isOpen():
try:
for x in range(0,100):
time.sleep(0.05)
port.write("command 1" + "\r\n")
我的天平配备了RS232串口和蓝牙发射器。我用VBA编写了一个程序来接收来自天平的数据。然而,假设在10个传入字符串中,我得到3个失真。我的常规字符串看起来像:"+001500./3 G S“。这意味着1500.3克以上,输出是稳定的。但有时我会得到像"+“或"001500./3”或"G S“这样的分隔字符串。当我插入串行电缆时,我没有失真。
我有一个arduino,当我从arduino串行监视器发送数据时,它会通过串行连接读取两个in,但无论我做什么,当我使用pySerial从python发送相同的数据时,我都不能让它工作,我已经在这个时候了,但什么也没有得到。
我已经尝试将数据编码为utf8,不同的编码刷新了输出缓冲区,并且读取了太多其他类似的堆栈溢出Q&As进行计数
我在Windows10中使用的是python 3.7.1,但代码将在Rpi上运行
import os
import time
import serial
ser = serial.Serial('COM7', baudrate=9600,
我在使用pySerial时遇到了问题,我不知道从哪里开始查找。我有一个64位的Windows操作系统,安装了Python2.7.5 (32位)、pySerial和Arduino (Arduino工作正常)。
我的Arduino代码如下:
// the setup routine runs once when you press reset:
void setup() {
// initialize the serial in 19200 baud rate
Serial.begin(19200);
}
// the loop routine
我正在编写一个程序,使用PySerial将一个10字节长的数据包发送给Arduino Uno ( Arduino和我的计算机的代码如下)。代码的工作方式应该是,每当一包字节被发送到Arduino时,它就会将字节回显回计算机。然后主机(我的笔记本电脑)读取该数据,并将其打印到控制台(延迟100毫秒)。但是,当我运行代码时,它会缓慢地输出10个空字节( b'' ),延迟超过100毫秒(更像是750毫秒)。在此之后,它的行为就像预期的那样,按顺序打印出数据包的每个元素,其间有100毫秒的延迟。有人能解释一下为什么会发生这种事吗?
Python代码:
import serial
imp
我正在使用进行一些数据记录。我想要观察它,并从串行命令行使用一个命令启动日志。但我也希望能够在不停止记录器的情况下关闭串行监视器。
我期望当我以串行方式写1时,"sta“被设置为输入,导致sta2 = 1,当我关闭监视器时,它应该保持为高,但显然不是。
代码
void loop() {
if (Serial.available()){
ser = Serial.read();
switch (ser){
case '0':
sta = 0;
s
我正在写一个程序从串行读取数据并显示它。有时(不是每次),当我用异常The I/O operation has been aborted because of either a thread exit or an application request断开串行连接时,它就会崩溃。(我猜这里有问题,即使不是每次都会发生)。
下面是我阅读连载的方法:
private void serialPort1_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
// this line below is where the exc
“我试图从串行连接中读取数据,如果它与我的字符串匹配,则执行一些操作,但是当我关闭串行连接端口时,它会给我带来错误。”
“由于某种原因,如果我使用serial.readline()方法,我不会看到这个错误”
import time
import serial
from Queue import Queue
from threading import Thread
class NonBlocking:
def __init__(self, serial_connection, radio_serial_connection):
self._s = serial_con
我正在为GSM调制解调器做一个软件。它使用AT命令进行串行通信。我们向它发出AT命令,它通过串行通信进行响应。我给它一个命令来检查SIM卡AT+CUSD=1,"*141#"中的平衡。它的回应是这样的:
+CUSD: 0, "Your balance is ... xxxxxxx "
现在,我想在messagebox上显示此消息。这是我正在使用的小代码:
String data = serialPort1.ReadExisting(); //to receive serial data and store it in data strig
logsTextBox
我正在使用pyserial将我的python代码与arduino连接起来。当我运行我的python代码时,我一直收到这个错误:
File "C:\Python27\lib\site-packages\serial\serialwin32.py", line 66, in open
raise SerialException("could not open port %r: %r" % (self.portstr, ctypes.WinError()))
SerialException: could not open port 'COM3'
我正在使用安装在UEIPAC 600 1-G盒上的vxworks .我正在尝试从串口读取数据。这是我的密码。
void read_serial(int n){
/* store number of bytes read = int n*/
int num=0;
/* hold the file descriptor */
int fd = 0;
/* dev name from iosDevShow output */
char dev_name[] = "/tyCo/0";
/* buffer to receive read */
char re[n];
/*