我正在使用Arduino Mega ADK芯片和Itead Bluetooth shield V2.2和Arduino 1.01软件,我不知道如何让AT命令从Arduino串行监视器返回'OK‘。
我已经为cmd设置了蓝牙芯片,其中rx在D0上,tx在D1上,交换机处于cmd模式,就像手册中显示的那样,它应该配置为cmd。(请参阅下面的链接)
然后我尝试了芯片上的一个应用程序,比如blink,其中不涉及串行命令,当我打开串行监视器时,我可以输入命令,但没有收到任何响应。我也尝试了监视器的每种波特率。
我计划使用Amarino应用程序来控制蓝牙芯片,但我找不到任何帮助来让这些命令工作。
当涉及到Arduino和C++时,我是个新手。
我正在试着写一个从模拟引脚0(一个POT)读取输入数据的程序。读取值后,我希望它打印到串行监视器上,但只打印一次。如果从模拟引脚0的值发生变化,我希望它将新值打印到串行监视器。我尝试使用全局变量,但无济于事。任何帮助都将不胜感激!
int entered=0;
int flag;
void setup()
{
Serial.begin(9600);
}
void loop() {
int potValue=analogRead(A0);
if (!entered){
entered=1;
Serial.println(potValue);
我几天前才开始Arduino编程,现在我想把电位器读数转移到移动设备上。我使用Arduino Leonardo和蓝牙Mate Silver和以下代码来传输数据:
#include <SoftwareSerial.h>
int bluetoothTx = 2; // TX-O pin of bluetooth mate, Arduino D2
int bluetoothRx = 3; // RX-I pin of bluetooth mate, Arduino D3
int val;
SoftwareSerial bluetooth(bluetoothTx, blu
我正在尝试从Windows上的Python向Arduino发送浮点值。我遇到的第一个问题是,当我从Python脚本发送数据时,我无法查看串行监视器。我在网上读到,这是因为只有一个应用程序可以同时管理端口:
但是,我看到了用户查看串行监视器以查看来自Python的串行数据和从Arduino输出的serial.print的例子。所以我不知道是怎么回事..。无法查看串行监视器确实会使调试变得困难。
我的Python代码:
import struct
import serial
import time
print('test123')
x=0.8
y=0.2
ser = serial
我正在使用PIR运动传感器与Arduino Bluno (带蓝牙模块)。我想通过蓝牙将传感器检测到的运动值从arduino发送到PC。
我如何才能在我的PC上获得它?它可以是C++,C#,甚至Python。如果有人能帮上忙,我将不胜感激。
下面是我的arduino代码:
int ledPin = 13; // choose the pin for the LED
int inputPin = 2; // choose the input pin (for PIR
int pirState = LOW;
char str1;//
我遵循了这个例子:
我有一个带sparkfun蓝牙设备的arduino uno板。我可以从Android连接并发送数据到arduino,我可以在串行监视器中看到这些数据弹出,但我无法将数据从arduino(串行监视器)发送回android。
我使用的是在活动的onResume方法中启动的ConnectThread。这是我的线程的代码:
private class ConnectedThread extends Thread {
private final BluetoothSocket mmSocket;
private final InputStream mm
我正在尝试从我的arduino发送一个字符串到串行监视器。我使用的是带有arduino UNO的sparkfun bluesmirf芯片。
我的代码非常简单:
void setup() {
Serial.begin(115200); // begin serial communication at 115200 baud rate
}
void loop() {
Serial.println("hello world"); // write hello world
delay(1000); // delay one second
}
当我打开监视器时,我
我在处理和Arduino在同一个串行端口上交谈时遇到了问题。为了简化我的问题,我编写了一个简单的程序,其中处理发送" Processing : Hello!“每一秒,Arduino都会发送"Arduino:你好!“每一秒,都到同一个串口。以下是代码:
处理代码:
import processing.serial.*; //import the Serial library
Serial mySerial; //the Serial port object
void delay(int time)
{
int start = millis();
while (mi
我是Node.JS和Arduino的新手。我有一个Arduino装置和几个传感器在上面。我正在和Arduino一起读温湿度值。我的串行监视器输出如下:
Humiditiy (%): 44.00
Temperature (Celcius): 26.00
Temperature (Kelvin): 299.00
Temperature (Fahrenheit): 58.00
Gas Value: 341
Humiditiy (%): 44.00
Temperature (Celcius): 26.00
Temperature (Kelvin): 299.00
Temperature (Fahre
我正在尝试使用python从arduino读取电位计的值。但是我的串行读取值很奇怪。
Python代码:
import serial
ser = serial.Serial('COM12')
print ( "connected to: " + ser.portstr )
count = 1
while True:
for line in ser.read():
print( str(count) + str( ': ' ) + str( line ) )
co