基本上,我是遵循的教程代码为LED条形图。我没有电位器,所以我想通过使用串行写入来模仿它,这是基于中比较暗淡的例子。我将sensorReading值设置为来自处理应用程序的输入(将其网格更新为1023个元素),如下所示:
int sensorReading;
if (Serial.available()) {
// Read the most recent byte (which will be from 0 to 1023):
sensorReading = Serial.read();
}
这将根据我在处理应用程序中的网格中的鼠标位置来点亮LED。然而,
我正在尝试通过串行通信从Python控制连接到Arduino的LED。我附上两个代码在Arduino和python。但是当我在Python中运行代码时,我没有从LED得到任何响应,尽管我没有得到任何错误。也许我在语法上犯了一些错误?
import serial
import time
arduino=serial.Serial('COM3',250000,timeout=5.0)
m=[]
commands=open('1.txt','r')
lines=commands.readlines()
for lin
我已经把阿杜伊诺和ESP8266联系起来了
Arduino引脚2连接到ESP的Tx Arduino引脚3通过分压器Arduino GND连接到ESP的Rx连接到ESP的GND Arduino 3v3连接到ESP的CH_PD
我已使用1117电压调节器为ESP8266供电
当我最初购买ESp8266时,它运行正常,但现在它显示了无穷无尽的垃圾价值……
arduino是用以下代码编写的
#include <SoftwareSerial.h>
SoftwareSerial esp8266(2,3); // make RX Arduino line is pin 2, make TX A
我正在建造一个机器人使用Arduino Mega 2560和一些步进电机和磁编码器来记录它的运动。
我的环境是:
阿迪诺·梅加2560
来自Sparkfun的蓝牙伴侣
Python 3.6.1
系列2.7
Windows 10
这是我试图在Python端使用的代码:
#This code is designed to test the communication between the python based code
#and a bluetooth mate connected to an Arduino Mega
# Author: Tynan Stack