我想过滤一个真正有噪声的信号,以便获得超过某个阈值的峰值数量。这是我使用的matlab代码:
thresh = 3; % Specify threshold
x = VarName1;
% Essentially need to pick out values which exceed threshold with the condition that the previous value
% needs to be below the threshold
idxl = x>=thresh;
idxl(1) = 0;
idx = find(idxl);
yest = x(idx-
将使用听诊器测量的心跳信号通过硬件(主要是放大器和截止频率为100 the的低通滤波器)传送到计算机的声卡。现在,使用截止100hz..the代码对信号进行滤波,以找到峰值和每分钟的心跳数,below..The代码仅在某些情况下有效。请帮我找出错误
clear all
%input the signal into matlab
[x,fs]=wavread('heartbeat.wav');
figure(1)
subplot(2,1,1)
x1=x(:,2);
plot(x1(500:10000),'r-');
title('unfiltered
我很难找到这张图中的4个主要峰值
信号是值非常不稳定,因为它们先升后降,很难找到最大值和它的索引。
function [peaks, locations] = findMaxs (mag, threshold)
len = length(mag);
prev = 1;
cur = 2;
next = 3;
k = 1; %number of peaks
while next < len
if mag(cur) - mag(prev) > threshold
if mag(cur) > mag(next)
peaks(
我使用dsPIC33FJ32MC204控制器连接了一个振幅为3V的正弦波,该正弦波在0到12位模数转换通道上偏移了1.5V,并存储在一个数组中。我想要检测每个间隔的峰值,所以请给我任何建议。我刚刚发布了五个样本中最大值检测的逻辑。我得到的输出为零。 void read_adc_Voltage()
{
int arr[100];
int arr1[100];
int max = arr[0];
arr[0]=0;
int i,j=0;
int count = 6;
for (i=1;i
我已经针对一些音频样本实现了一个简单的自相关例程,其速率为44100.0,块大小为2048。
我遵循的通用公式如下所示:
r[k] = a[k] * b[k] = ∑ a[n] • b[n + k]
我已经在一个暴力嵌套循环中实现了它,如下所示:
for k = 0 to N-1 do
for n = 0 to N-1 do
if (n+k) < N
then r[k] := r[k] + a(n)a(n+k)
else
break;
end for n;
end for k;
我寻找r中的最大震级,确
我的文件夹包含超过100个压缩文件。我想从一个文件夹中随机选择6个压缩文件。
我试着:
DirectoryInfo test = new DirectoryInfo(@ "C:\test").GetFiles();
foreach(FileInfo file in test.GetFiles()) {
Random R = new Random(); //try to apply random logic but fail.
if (file.Extension == ".zip") {
string a = "";