我用windows和linux双重引导我的pc。我预装了窗口,然后安装了Linux。我完整地安装了它,最后,重新启动它。
当我重新启动它时,我会显示错误。
unexpected inconsistency; run fsck manually
我尝试了fsck和force,但是,不起作用。fsck显示错误
filesystem size is larger than physical size and either superblock
or the partition table is likely to be corrupt
所以,我运行resize2fs命令,它显示了not found
我试图引导我的PC,但我遇到了这个问题。
fsck from util-linux 2.26.2
/dev/sdb6 contains a file system with errors check forced.
/dev/sdb6: Unconnected directory inode 1076721 (/var/tmp/???)
/dev/sdb6: UNEXPECTED INCONSISTENCY: RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code
我从一个可引导的Ubuntu USB棒上做了一次检查,然后运行
sudo fsck -y /dev/sda2
在计算机的主Linux分区上。输出类似于
...
Pass 1B: Rescanning for multiply-claimed blocks
Error while scanning inodes (207...): Inode checksum does not match inode
/dev/sda2: **** FILE SYSTEM WAS MODIFIED ***
e2fsck: aborted
/dev/sda2: **** FILE SYSTEM WAS MO
有一天,当它被绞死了半个多小时后,我不得不不关机就强行退出了。但是我什么时候重新启动了它,又显示了一些错误,我和agian没有发现任何我自己累了的solution.One东西,我在引导菜单上打开了ubuntu,从旧的可用内核中打开了ubuntu,并且能够成功地运行ubuntu,并且仍然在运行。
在安装几个软件时出现了问题,比如我无法运行R interpeter等。
目前,我尝试过sudo apt安装libgconf-2-4 libappindicator1。
这是一种不和谐的依赖,它说这个错误:
> The following packages have unmet dependenci
我是在引导linux (版本4.14.13+),而不使用initrd/initramfs,并且我看到/sbin/modprobe在挂载根文件系统之前运行。我想知道这怎么可能。每当使用文件系统时,我都会将内核检测到printk,这也是我知道使用/sbin/modprobe的原因。
下面的链接包含我的引导的完整dmesg输出:dmesg输出
[ 3.175001] Used file system /sbin/modprobe!
[ 3.179080] Used file system /dev/console!
[ 3.844276] Used file system /d
我的Ubuntu18.04安装最近停止了正常的引导--我只能看到左上角有一个程序的空白屏幕。但是当我启用UEFI安全引导选项时,启动就完成了。当从悬置中醒来时,空白屏幕也会出现,我必须重新设置我的计算机才能登录到Ubuntu。我有最新的Nvidia驱动程序(440)和以下grub设置:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see: