我有一个JPanel 200x200。
我试图创建一个函数,生成带有JPanel边界的随机抛物线,限制其高度不能低于100 (屏幕中部),我基本上想在这些抛物线周围移动一个形状。
下面是我开始使用的一些代码:
Random random = new Random(); int y; int x;
int size = random.nextInt(10);
int translation = random.nextInt(50);
int height = random.nextInt(100) - 200; //between 100 and 200
//抛物线函数:y=(x/7-
我有一组数据,想把抛物线拟合在上面。这已经适用于numpy的polyfit函数,如下所示:
fit = np.polyfit(X, y, 2)
formula = np.poly1d(fit)
现在,我希望抛物线的峰值在一个固定的x值,并且在这个固定的峰值中,拟合仍然是最好的。有办法做到这一点吗?
根据我的资料,我知道抛物线总是向下开的。
给出了以下方程。
我知道我需要把二级ODE分解成4个一阶ODE,这就是我所得到的。我首先引入了新变量u,在图片的底部,我编写了与ODE45一起使用的matlab函数。
现在的问题是,我应该得到一个抛物线形状(蓝线),但这不是我得到的。
我已经检查了我的代码上千次了,但没有结果。能检测到我的函数中的错误吗?
主程序
global g H R alfa
alfa=pi/2;
g = 20.0;
R = 1;
H=2.3;
k = 0:0.01:2;
[T,Y] = ode45(@fspace,k,[H 0 0 0]);
plot(T,Y(:,1))
hold on
我想用python 2.7画一条抛物线,知道顶点的坐标。
目前我已经实现了这一点。问题是顶点不在抛物线上,实际上它绘制了一条抛物线和一个单独的点。有人能指出这个错误吗?谢谢。
def parabola(return_hist1,V):
#solve the equations and plot the parabola
# V[0] is the x-coordinate and V[1] is the y-coordinate
A=np.array([[2*V[0]],[4*V[1]]])
B=np.array([[1],[-1]])
sol=A*
我想知道如何得到构成给定抛物线的所有点(x,y)。它几乎不能模拟物体从点A到点B的跳跃。我知道:点A的-The坐标,抛物线顶部B点的-The坐标,B点的-The坐标。
我想要做的是从start_x循环到dest_x,在那一刻计算Y坐标,但是我不知道该怎么做。
pixels = []
for x in start_x to dest_x
y = (calculate the Y-coord here based on x )
pixels.push( [x,y] )
end
return pixels
我的数学能力也不例外。谢谢。
我有一个代码: import matplotlib.pyplot as plt
import numpy as np
# create 1000 equally spaced points between -10 and 10
x = np.linspace(-10, 10, 1000)
# calculate the y value for each element of the x vector
y = 2*x**2 - 3*x + 5
# draw a tangent line to parabola at x = -1
a = -7*x + 3
# draw a norma