我知道MUX只能在运行某些IOS版本的7600上配置,我相信是SR和SX。这不包括SRE吗?
登录到运行12.2(33)SRE9a的7600中,配置如下;
interface GigabitEthernet8/3
description Link to a box
no ip address
!
interface GigabitEthernet8/3.123
description L3 link to a box
encapsulation dot1Q 556
ip address 10.21.225.65 255.255.255.248
!
interface GigabitE
我的目标是检测以太网电缆何时断开,我正在尝试使用NetworkChange类,但当我拔出以太网电缆时,事件NetworkAvailibilityChanged不会触发。NetworkAddressChanged确实在大约8秒内触发,但是NetworkAvailibilityChanged从来没有触发过,是不是有什么我遗漏了什么?
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
NetworkChange.
为什么配置文件中的IP地址称为接口。例如,下面是Redis配置文件的摘录。
# If you want you can bind a single *interface*, if the bind option is not
# specified all the *interfaces* will listen for incoming connections.
#
bind 127.0.0.1
使用数据包跟踪器,我可以用两个NIC连接服务器,一个连接到路由器,另一个连接到LAN:
my router int 192.168.0.1 / 24
my server fa0/0 192.168.0.2 255.255.255.0 192.168.0.1
my server fa0/1 192.168.1.2 255.255.255.0 192.168.1.1
my pc 192.168.1.5 255.255.255.0.192.168.1.1 **********
这个是可能的吗?
我明白了:
Router(config)#interface fastEthernet 0/0
Rou
我正在运行一个包含多个NIC的Ubuntu9.10服务器。我想确保每次内核启动时,带有MAC地址的NIC被分配给01:23:45:67:89:ab,而具有MAC地址ba:98:76:54:32:10的NIC被分配给eth1。
在Fedora上,我能够通过在/etc/sysconfig/network/ifcfg-eth0中指定MAC地址来做到这一点。
DEVICE=eth0
HWADDR=01:23:45:67:89:ab
# the rest of the configuration goes here
(同样适用于ifcfg-eth1)。
在/etc/network/接口中是否存在在Ubu
我目前有一个linux系统,只有一个物理以太网端口。这个物理端口有eth0网络接口。我想要创建另一个以太网接口,它也使用这个单一的物理端口。如何使用/etc/network/interfaces文件实现这一点?
我的最终目标是能够使用一个以太网端口访问两个不同的网络。例如,如果我有以下interfaces文件:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.11
netmask 255.255.255.0
gateway 192