当我尝试启动apache2时,系统会向我报告以下消息。
* Restarting web server apache2
ulimit: 88: error setting limit (Operation not permitted)
ulimit: 88: error setting limit (Operation not permitted)
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no li
sudo nmap -p0-65535 127.0.0.1
Starting Nmap 7.40 ( https://nmap.org ) at 2018-02-06 19:03 HKT
Nmap scan report for localhost (127.0.0.1)
Host is up (0.0000050s latency).
Not shown: 65525 closed ports
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
80/tcp open http
110/tcp open pop
嗨,我正在使用.net.Sockets创建服务器/客户端应用程序,类似于cybercafe软件。
我在codeproject 上遵循这个例子
我在本地pc上运行它没有问题。但是当我在网络中的另一台pc上运行客户端时,我遇到了一个问题。
说:
No connection could be made because the target machine actively refused it.
我尝试在cmd上使用netstat -a,我发现我们网络上所有p.c的端口号总是变化的。
有没有办法不使用端口号,只使用主机名或it地址。
我需要帮助..。
致以敬意
我想在互联网上使用我的网络服务。我打开了我的端口是4501,我禁用了调制解调器和windows上的防火墙。我可以写我的全球ip,我可以打开调制解调器控制接口。但是我想连接到地址是XX.XX:4501/Products.svc的iis
它可以在本地主机()上工作,但我无法连接到互联网上的svc。
我不知道问题出在哪里。
当我添加我的svc链接地址作为添加参考服务时,我得到了这个错误
There was an error downloading 'http://xx.xx.xx.xx:4501/Products.svc'.
Unable to connect to the
我是新来的,并尝试了从DigitalOcean,但当我做docker run -p 5000:5000 flask_demo:v0,我得到以下错误。
码头工人:
Error response from daemon: Ports are not available: listen tcp 0.0.0.0:5000: bind: address already in use.
请帮帮我
#include <DFRobot_sim808.h>
#include <SoftwareSerial.h>
//#define PIN_TX 1
//#define PIN_RX 0
//SoftwareSerial mySerial(PIN_TX,PIN_RX);
//DFRobot_SIM808 sim808(&mySerial);//Connect RX,TX,PWR,
//make sure that the baud rate of SIM900 is 9600!
//you can use the AT Command(AT+I
我有一台安装了Exchange 2010的Windows SBS 2011服务器。最近,我安装了BackupAssist (www.backupassist.com)并配置了Exchange2010备份任务。然后它要求安装"Microsoft Exchange Server MAPI Client (and CDO) 1.2.1“,然后我继续。但安装完成后,Exchange Server会停止接收邮件吗?
在EventViewer中,我可以读到以下错误:
Process MSExchangeFDS.exe (PID=10352). Failed to read property Pat
突然,面对标题中提到的上述问题,我在xamp软件中单击了启动服务,以启动Apache服务器,但我不能,下面是错误被抛出的原因。
Problem detected!
5:55:26 PM [Apache] Port 80 in use by "Unable to open process" with PID 4!
5:55:26 PM [Apache] Apache WILL NOT start without the configured ports free!
5:55:26 PM [Apache] You need t